LM2575-5.0WT (TO-220-5) — Symbol, Footprint IPC-7351B & 3D STEP Model

LM2575-5.0WT

MICROCHIPTO-220-5 · 5 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · LM2575-5.0WT (TO-220-5)1VIN2OUT3GND5ON#/OFF4FBGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345E=10.20mm · Pitch e=0.50mmD=4.50mm-7-5-3-11357531-1-3-5mm
3. 3D CAD MODEL
Package Body: 10.20mm × 4.50mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (5/5)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VINPowerPower Supply Input (VIN — 1.23V to 37V)
2OUTI/OMultiplexed I/O & Peripheral Pin OUT (General)
3GNDGNDGround Reference Pin (GND)
4FBI/OMultiplexed I/O & Peripheral Pin FB (General)
5ON#/OFFI/OMultiplexed I/O & Peripheral Pin ON#/OFF (General)
PIN 1 VIN
Power
Power Supply Input (VIN — 1.23V to 37V)
Design note: Primary positive power supply input (VIN) operating in the 1.23V to 37V domain (Max rating: 37.0V).
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 13 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
LM2575-5.0WT (TO-220-5) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
LM2575-5.0WT (TO-220-5) - 2. Standard Pinout (Top View)
True package pinout (5 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
LM2575-5.0WT (TO-220-5) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
LM2575-5.0WT (TO-220-5) - 4. Package Dimensions (D×E×A)
TO-220-5 · 10.20×4.50mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
LM2575-5.0WT (TO-220-5) - 5. Recommended Land Pattern
IPC-7351B Footprint (5 Pads)Expand ›
6. Application SchematicSCHEMATIC
LM2575-5.0WT (TO-220-5) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (13 figures · Page 1/2)
Showing 1–12 of 13 uncropped original figures for LM2575
P1 · p01_fig01786×347px
LM2575-5.0WT (TO-220-5) — Note: Pin numbers are for TO-220 Package R2 R1
Note: Pin numbers are for TO-220 Package R2 R1
P1 · p01_fig02876×495px
LM2575-5.0WT (TO-220-5) — Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
P1 · p01_fig02P1
LM2575-5.0WT (TO-220-5) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P7 · p07_fig011825×680px
LM2575-5.0WT (TO-220-5) — Switch Saturation Voltage
Switch Saturation Voltage
P7 · p07_fig02472×528px
LM2575-5.0WT (TO-220-5) — Current Limit
Current Limit
P7 · p07_fig031571×996px
LM2575-5.0WT (TO-220-5) — 3.0 2.5
3.0 2.5
P7 · p07_fig041571×787px
LM2575-5.0WT (TO-220-5) — 25 C
25 C
P7 · p07_fig051599×550px
LM2575-5.0WT (TO-220-5) — INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
P9 · p09_fig01694×628px
LM2575-5.0WT (TO-220-5) — Micrel, Inc. LM2575
Micrel, Inc. LM2575
P9 · p09_fig021217×796px
LM2575-5.0WT (TO-220-5) — Functional Diagrams
Functional Diagrams
P9 · p09_fig031217×849px
LM2575-5.0WT (TO-220-5) — May 2009 9 M9999-051209-B
May 2009 9 M9999-051209-B
P10 · p10_fig011628×1183px
LM2575-5.0WT (TO-220-5) — Micrel, Inc. LM2575 | Package Information | 0.020 (0.508) | 0.018±0.003 (0.457±0.076) | PIN 1 | 0.780 (19.812) | .250±0.005 (6.350±0.127) | 0.025±0.015 (0.635±0.381) | 0.100±0.010 (2.540±0.254) | MAX | 0.030-0.110 (0.762-2.794) RAD | 0.125
Micrel, Inc. LM2575 | Package Information | 0.020 (0.508) | 0.018±0.003 (0.457±0.076) | PIN 1 | 0.780 (19.812) | .250±0.005 (6.350±0.127) | 0.025±0.015 (0.635±0.381) | 0.100±0.010 (2.540±0.254) | MAX | 0.030-0.110 (0.762-2.794) RAD | 0.125
Page 1 / 2 (13 extracted figures)

Technical Specifications & Part Details (LM2575-5.0WT)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:LM2575-5.0WT (TO-220-5) is a 5-pin standard electronic & interconnect component featuring a 10.20 × 4.50 × 14.90 mm mechanical envelope (lead pitch e = 0.00 mm). Rated for 1.23V to 37V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.23V to 37V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
52kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
10.20 × 4.50 × 14.90 mm (A1=0.02 mm)
Package family: OTHER (TO-220-5)
Pin Count & Lead PitchN / e
5 Pins
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol5 auto-grouped pins
OK
IPC-7351B Land Pattern5 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TO-220-5)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
10.20 × 4.50 mm
Height (A) & Pitch (e)IPC-7351B
A=14.90mm · e=0.50mm
Pad Size (W × L)Level B
0.40 × 0.90 mm
Pins / Total PadsTopology
5P / 5Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TO-220-5
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — LM2575-5.0WT (TO-220-5)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of LM2575-5.0WT (TO-220-5)?

Manufactured by MICROCHIP, the LM2575-5.0WT is housed in a TO-220-5 package with 5 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.23V to 37V. Key pins include: 1 (VIN: Power Supply Input (VIN — 1.23V to 37V)), 2 (OUT: Multiplexed I/O & Peripheral Pin OUT (General)), 3 (GND: Ground Reference Pin (GND)), 4 (FB: Multiplexed I/O & Peripheral Pin FB (General)), 5 (ON#/OFF: Multiplexed I/O & Peripheral Pin ON#/OFF (General)).

What are the IPC-7351B PCB Footprint dimensions for LM2575-5.0WT?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), LM2575-5.0WT (TO-220-5) has a nominal body envelope of 4.50 × 10.20 mm, pitch e = 0.50 mm, and 5 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for LM2575-5.0WT?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for LM2575-5.0WT (MICROCHIP, TO-220-5) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (5 pins) & LM2575 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VINPower_InPrimary positive power supply input (VIN) operating in the 1.23V to 37V domain (Max rating: 37.0V).
2OUTDigital_IOSignal terminal OUT (I/O, 1.23V to 37V domain). Multiplexed alternate functions: OUT. Supported peripheral buses: General.
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4FBDigital_IOSignal terminal FB (I/O, 1.23V to 37V domain). Multiplexed alternate functions: FB. Supported peripheral buses: General.
5ON#/OFFDigital_IOSignal terminal ON#/OFF (I/O, 1.23V to 37V domain). Multiplexed alternate functions: ON#/OFF. Supported peripheral buses: General.