PIC10LF322-I/P (PDIP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC10LF322-I/P

MICROCHIPPDIP-8 · 8 Pins · Pitch 2.54mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC10LF322-I/P (PDIP-8)1N/C2VDD3RA24ICSPCLK/RA18RA3/MCLR#/VP7VSS6N/C5RA0/ICSPDATGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=2.00mm · Pitch e=2.54mmD=3.00mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 2.00mm × 3.00mm · Pitch: 2.54mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1N/CI/OMultiplexed I/O & Peripheral Pin N/C (General)
2VDDPowerPower Supply Input (VDD — 1.8V to 3.6V)
3RA2I/OMultiplexed I/O & Peripheral Pin RA2 (General)
4ICSPCLK/RA1I/OMultiplexed I/O & Peripheral Pin ICSPCLK/RA1 (General)
5RA0/ICSPDATI/OMultiplexed I/O & Peripheral Pin RA0/ICSPDAT (General)
6N/CI/OMultiplexed I/O & Peripheral Pin N/C (General)
7VSSGNDGround Reference Pin (VSS)
8RA3/MCLR#/VPPI/OMultiplexed I/O & Peripheral Pin RA3/MCLR#/VPP (General)
PIN 1 N/C
I/O
Multiplexed I/O & Peripheral Pin N/C (General)
Design note: Signal terminal N/C (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: N/C. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 11 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC10LF322-I/P (PDIP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC10LF322-I/P (PDIP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC10LF322-I/P (PDIP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC10LF322-I/P (PDIP-8) - 4. Package Dimensions (D×E×A)
PDIP-8 · 2.00×3.00mm · Pitch 2.54mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC10LF322-I/P (PDIP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC10LF322-I/P (PDIP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (11 figures · Page 1/1)
Showing 1–11 of 11 uncropped original figures for PIC10LF322
P1 · p01_fig01EXACT PACKAGE
PIC10LF322-I/P (PDIP-8) — 6/8-Pin Flash-Based, 8-Bit Microcontrollers
6/8-Pin Flash-Based, 8-Bit Microcontrollers
P99 · p99_fig011493×391px
PIC10LF322-I/P (PDIP-8) — Equation 18-3 is used to calculate the PWM duty cycle ratio.
Equation 18-3 is used to calculate the PWM duty cycle ratio.
P99 · p99_fig021723×471px
PIC10LF322-I/P (PDIP-8) — Duty Cycle Ratio PW M xD CH :PW M xDCL<7:6>   4 PR2 1 +   ---------------------------------------------------------------------------------- =
Duty Cycle Ratio PW M xD CH :PW M xDCL<7:6>   4 PR2 1 +   ---------------------------------------------------------------------------------- =
P99 · p99_fig03867×457px
PIC10LF322-I/P (PDIP-8) — The output polarity is inverted by setting the PWMxPOL bit of the PWMxCON register.
The output polarity is inverted by setting the PWMxPOL bit of the PWMxCON register.
P99 · p99_fig04867×479px
PIC10LF322-I/P (PDIP-8) — The PWM period is specified by the PR2 register of Timer2. The PWM period can be calculated using the formula of Equation 18-1.
The PWM period is specified by the PR2 register of Timer2. The PWM period can be calculated using the formula of Equation 18-1.
P99 · p99_fig02P99
PIC10LF322-I/P (PDIP-8) — Datasheet Page 99 (p99_fig02)
Datasheet Page 99 (p99_fig02)
P146 · p146_fig011416×1013px
PIC10LF322-I/P (PDIP-8) — FIGURE 22-3: TYPICAL CONNECTION FOR ICSP™ PROGRAMMING
FIGURE 22-3: TYPICAL CONNECTION FOR ICSP™ PROGRAMMING
P146 · p146_fig01P146
PIC10LF322-I/P (PDIP-8) — Datasheet Page 146 (p146_fig01)
Datasheet Page 146 (p146_fig01)
P147 · p147_fig01867×1161px
PIC10LF322-I/P (PDIP-8) — FIGURE 23-1: GENERAL FORMAT FOR INSTRUCTIONS Byte-oriented file register operations 13 8 7 6 0
FIGURE 23-1: GENERAL FORMAT FOR INSTRUCTIONS Byte-oriented file register operations 13 8 7 6 0
P181 · p181_fig011777×2564px
PIC10LF322-I/P (PDIP-8) — PIC10(L)F320/322
PIC10(L)F320/322
P181 · p181_fig01P181
PIC10LF322-I/P (PDIP-8) — Datasheet Page 181 (p181_fig01)
Datasheet Page 181 (p181_fig01)

Technical Specifications & Part Details (PIC10LF322-I/P)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC10LF322-I/P (PDIP-8) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 2.00 × 4.50 mm mechanical envelope (lead pitch e = 2.54 mm). Rated for 1.8V to 3.6V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated ADC, PWM interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
16 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 2.00 × 4.50 mm (A1=0.51 mm)
Package family: DIP (PDIP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 2.54 mm (100.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
ADC, PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 2.54mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (PDIP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=4.50mm · e=2.54mm
Pad Size (W × L)Level B
1.60 × 1.60 mm
Pins / Total PadsTopology
8P / 8Pad (THT_DIP)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
PDIP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC10LF322-I/P (PDIP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC10LF322-I/P (PDIP-8)?

Manufactured by MICROCHIP, the PIC10LF322-I/P is housed in a PDIP-8 package with 8 pins and a 2.54 mm lead pitch, supporting a VCC supply range of 1.8V to 3.6V. Key pins include: 1 (N/C: Multiplexed I/O & Peripheral Pin N/C (General)), 2 (VDD: Power Supply Input (VDD — 1.8V to 3.6V)), 3 (RA2: Multiplexed I/O & Peripheral Pin RA2 (General)), 4 (ICSPCLK/RA1: Multiplexed I/O & Peripheral Pin ICSPCLK/RA1 (General)), 5 (RA0/ICSPDAT: Multiplexed I/O & Peripheral Pin RA0/ICSPDAT (General)), 6 (N/C: Multiplexed I/O & Peripheral Pin N/C (General)).

What are the IPC-7351B PCB Footprint dimensions for PIC10LF322-I/P?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC10LF322-I/P (PDIP-8) has a nominal body envelope of 2.00 × 3.00 mm, pitch e = 2.54 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC10LF322-I/P?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC10LF322-I/P (MICROCHIP, PDIP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & PIC10LF322 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1N/CDigital_IOSignal terminal N/C (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: N/C. Supported peripheral buses: General.
2VDDPower_InPrimary positive power supply input (VDD) operating in the 1.8V to 3.6V domain (Max rating: 3.6V).
3RA2Digital_IOSignal terminal RA2 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RA2. Supported peripheral buses: General.
4ICSPCLK/RA1Digital_IOSignal terminal ICSPCLK/RA1 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: ICSPCLK/RA1. Supported peripheral buses: General.
5RA0/ICSPDATDigital_IOSignal terminal RA0/ICSPDAT (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RA0/ICSPDAT. Supported peripheral buses: General.
6N/CDigital_IOSignal terminal N/C (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: N/C. Supported peripheral buses: General.
7VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
8RA3/MCLR#/VPPDigital_IOSignal terminal RA3/MCLR#/VPP (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: RA3/MCLR#/VPP. Supported peripheral buses: General.