MX555ABD100M000 (SMD5032-6P) — Symbol, Footprint IPC-7351B & 3D STEP Model

MX555ABD100M000

MICROCHIPSMD5032-6P · 6 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MX555ABD100M000 (SMD5032-6P)1OE2DNC3GND6VDD5Q, /Q4Q, /QGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
654321E=5.00mm · Pitch e=1.27mmD=3.20mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 5.00mm × 3.20mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (6/6)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1OEI/OMultiplexed I/O & Peripheral Pin OE (General)
2DNCI/OMultiplexed I/O & Peripheral Pin DNC (General)
3GNDGNDGround Reference Pin (GND)
4Q, /QI/OMultiplexed I/O & Peripheral Pin Q, /Q (General)
5Q, /QI/OMultiplexed I/O & Peripheral Pin Q, /Q (General)
6VDDPowerPower Supply Input (VDD — 4.5V ~ 16.0V VCC)
PIN 1 OE
I/O
Multiplexed I/O & Peripheral Pin OE (General)
Design note: Output Enable, disables output to tri-state, 0 = Disabled, 1 = Enabled, 50k Ohms Pull-Up (Internal)
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 9 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MX555ABD100M000 (SMD5032-6P) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MX555ABD100M000 (SMD5032-6P) - 2. Standard Pinout (Top View)
True package pinout (6 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MX555ABD100M000 (SMD5032-6P) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MX555ABD100M000 (SMD5032-6P) - 4. Package Dimensions (D×E×A)
SMD5032-6P · 5.00×3.20mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
MX555ABD100M000 (SMD5032-6P) - 5. Recommended Land Pattern
IPC-7351B Footprint (6 Pads)Expand ›
6. Application SchematicSCHEMATIC
MX555ABD100M000 (SMD5032-6P) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (9 figures · Page 1/1)
Showing 1–9 of 9 uncropped original figures for MX555
P5 · p05_fig01EXACT PACKAGE
MX555ABD100M000 (SMD5032-6P) — 6-Pin LGA (5x3.2mm) Note: 3. Package information is correct as of the publication date. For updates and most current information, go to www.microchip.com.
6-Pin LGA (5x3.2mm) Note: 3. Package information is correct as of the publication date. For updates and most current information, go to www.microchip.com.
P1 · p01_fig01470×236px
MX555ABD100M000 (SMD5032-6P) — General Description
General Description
P2 · p02_fig01795×507px
MX555ABD100M000 (SMD5032-6P) — Pin Configuration
Pin Configuration
P2 · p02_fig01P2
MX555ABD100M000 (SMD5032-6P) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P3 · p03_fig011625×1085px
MX555ABD100M000 (SMD5032-6P) — Figure 1. HCSL Output 100MHz 1MHz-20MHz 109fs
Figure 1. HCSL Output 100MHz 1MHz-20MHz 109fs
P3 · p03_fig021625×1085px
MX555ABD100M000 (SMD5032-6P) — Figure 2. HCSL Output 100MHz 12kHz-20MHz 135fs
Figure 2. HCSL Output 100MHz 12kHz-20MHz 135fs
P4 · p04_fig011625×1085px
MX555ABD100M000 (SMD5032-6P) — Figure 1. HCSL Output 100MHz 100kHz-20MHz 131fs
Figure 1. HCSL Output 100MHz 100kHz-20MHz 131fs
P4 · p04_fig01P4
MX555ABD100M000 (SMD5032-6P) — Datasheet Page 4 (p04_fig01)
Datasheet Page 4 (p04_fig01)
P5 · p05_fig01P5
MX555ABD100M000 (SMD5032-6P) — Datasheet Page 5 (p05_fig01)
Datasheet Page 5 (p05_fig01)

Technical Specifications & Part Details (MX555ABD100M000)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Interface Bridge / Precision Clock & Timer IC
Detailed Overview:MX555ABD100M000 (SMD5032-6P) is a 6-pin interface bridge / precision clock & timer ic featuring a 5.00 × 3.20 × 1.00 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C to +85°C with integrated ADC, DAC interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
5.00 × 3.20 × 1.00 mm (A1=0.02 mm)
Package family: OTHER (SMD5032-6P)
Pin Count & Lead PitchN / e
6 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
ADC, DAC
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol6 auto-grouped pins
OK
IPC-7351B Land Pattern6 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SMD5032-6P)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
5.00 × 3.20 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=1.27mm
Pad Size (W × L)Level B
0.89 × 1.60 mm
Pins / Total PadsTopology
6P / 6Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
C_ctrl
BOM
10nF (0.01µF) Ceramic
0603 / Disc
Bypass cap on 2/3 VCC comparator threshold at CONT (Pin 5) — tie to GND when unused.
C_dec
BOM
100nF Ceramic + 10µF Electrolytic
Radial / 0805
Supply transient bypass (~150mA shoot-through spikes) on VCC (Pin 8) — place adjacent to Pins 8-1.
R1, R2 + C_timing
BOM
R1=4.7kΩ, R2=47kΩ, C=100nF
0603 / THT
RC timing network on DISCH (Pin 7), THRES (Pin 6), TRIG (Pin 2) — tie RESET (Pin 4) to VCC if unused.
SA555P / SE555P
Texas Instruments
100% Drop-in DIP-8 (Industrial -40°C~85°C)100% Pin-to-Pin DIP-8 equivalent for 555 timer designs.
TLC555CP / LMC555CN
Texas Instruments
100% Pin-to-Pin DIP-8 (Low-power CMOS)100% Pin-to-Pin DIP-8 equivalent for 555 timer designs.

Technical Frequently Asked Questions (FAQ) — MX555ABD100M000 (SMD5032-6P)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MX555ABD100M000 (SMD5032-6P)?

Manufactured by MICROCHIP, the MX555ABD100M000 is housed in a SMD5032-6P package with 6 pins and a 1.27 mm lead pitch. Key pins include: 1 (OE: Multiplexed I/O & Peripheral Pin OE (General)), 2 (DNC: Multiplexed I/O & Peripheral Pin DNC (General)), 3 (GND: Ground Reference Pin (GND)), 4 (Q, /Q: Multiplexed I/O & Peripheral Pin Q, /Q (General)), 5 (Q, /Q: Multiplexed I/O & Peripheral Pin Q, /Q (General)), 6 (VDD: Power Supply Input (VDD — 4.5V ~ 16.0V VCC)).

What are the IPC-7351B PCB Footprint dimensions for MX555ABD100M000?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MX555ABD100M000 (SMD5032-6P) has a nominal body envelope of 3.20 × 5.00 mm, pitch e = 1.27 mm, and 6 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MX555ABD100M000?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MX555ABD100M000 (MICROCHIP, SMD5032-6P) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (6 pins) & MX555 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1OEDigital_IOSignal terminal OE (I/O, 4.5V ~ 16.0V VCC domain). Multiplexed alternate functions: OE. Supported peripheral buses: General.
2DNCNCSignal terminal DNC (I/O, 4.5V ~ 16.0V VCC domain). Multiplexed alternate functions: DNC. Supported peripheral buses: General.
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4Q, /QDigital_IOSignal terminal Q, /Q (I/O, 4.5V ~ 16.0V VCC domain). Multiplexed alternate functions: Q, /Q. Supported peripheral buses: General.
5Q, /QDigital_IOSignal terminal Q, /Q (I/O, 4.5V ~ 16.0V VCC domain). Multiplexed alternate functions: Q, /Q. Supported peripheral buses: General.
6VDDPower_InPrimary positive power supply input (VDD) operating in the 4.5V ~ 16.0V VCC domain (Max rating: 18.0V).