PIC18LF25J50-I/ML (QFN-28-EP(6x6)) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC18LF25J50-I/ML

MICROCHIPQFN-28-EP(6x6) · 29 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC18LF25J50-I/ML (QFN-28-EP(6x6))1IO12RA3/AN3/VREF3VDDCORE/VCAP4NC5VSS6OSC1/CLKI/RA7OSC2/CLKO/RA8RC0/T1OSO/T19RC1/T1OSI/UO10RC2/AN11/CTP11VUSB12RC4/D-/VM13RC5/D+/VP14RC6/TX1/CK1/15RC7/RX1/DT1/29EP28RA1/AN1/C2IN27IO4726MCLR#25RB7/KBI3/PGD24RB6/KBI2/PGC23RB5/KBI1/SDI22RB4/KBI0/SCK21RB3/AN9/CTED20IO919RB1/AN10/RTC18RB0/AN12/INT17VDD16VSSGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.825.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4mm
2. 2D FOOTPRINT
1234567891011121314151617181920212223242526272829E=6.00mm · Pitch e=0.65mmD=6.00mm-5-4-3-2-1012345543210-1-2-3-4-5mm
3. 3D CAD MODEL
Package Body: 6.00mm × 6.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (29/29)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1IO1I/OGeneral Purpose Digital I/O Pin IO1
2RA3/AN3/VREF+/C1INBAnalogMultiplexed I/O & Peripheral Pin RA3/AN3/VREF+/C1INB (General)
3VDDCORE/VCAPPowerPower Supply Input (VDDCORE/VCAP — 2.0V to 3.6V)
4NCNCNo Connect (Leave Floating)
5VSSGNDGround Reference Pin (VSS)
6OSC1/CLKI/RA7I/OMultiplexed I/O & Peripheral Pin OSC1/CLKI/RA7 (RTC/CLK)
7OSC2/CLKO/RA6I/OMultiplexed I/O & Peripheral Pin OSC2/CLKO/RA6 (RTC/CLK)
8RC0/T1OSO/T1CKI/RP11I/OMultiplexed I/O & Peripheral Pin RC0/T1OSO/T1CKI/RP11 (General)
9RC1/T1OSI/UOE#/RP12I/OMultiplexed I/O & Peripheral Pin RC1/T1OSI/UOE#/RP12 (General)
10RC2/AN11/CTPLS/RP13I/OMultiplexed I/O & Peripheral Pin RC2/AN11/CTPLS/RP13 (General)
11VUSBI/OMultiplexed I/O & Peripheral Pin VUSB (General)
12RC4/D-/VMI/OMultiplexed I/O & Peripheral Pin RC4/D-/VM (USB)
13RC5/D+/VPI/OMultiplexed I/O & Peripheral Pin RC5/D+/VP (USB)
14RC6/TX1/CK1/RP17I/OMultiplexed I/O & Peripheral Pin RC6/TX1/CK1/RP17 (General)
15RC7/RX1/DT1/SDO1/RP18I/OMultiplexed I/O & Peripheral Pin RC7/RX1/DT1/SDO1/RP18 (General)
16VSSGNDGround Reference Pin (VSS)
17VDDPowerPower Supply Input (VDD — 2.0V to 3.6V)
18RB0/AN12/INT0/RP3I/OMultiplexed I/O & Peripheral Pin RB0/AN12/INT0/RP3 (General)
19RB1/AN10/RTCC/RP4I/OMultiplexed I/O & Peripheral Pin RB1/AN10/RTCC/RP4 (RTC/CLK)
20IO9I/OGPIO9 / RTC_GPIO9 / TOUCH9 / ADC1_CH8 / FSPIHD
21RB3/AN9/CTEDG2/VPO/RP6I/OMultiplexed I/O & Peripheral Pin RB3/AN9/CTEDG2/VPO/RP6 (General)
22RB4/KBI0/SCK1/SCL1/RP7I/OMultiplexed I/O & Peripheral Pin RB4/KBI0/SCK1/SCL1/RP7 (SPI, I2C)
23RB5/KBI1/SDI1/SDA1/RP8I/OMultiplexed I/O & Peripheral Pin RB5/KBI1/SDI1/SDA1/RP8 (I2C)
24RB6/KBI2/PGC/RP9I/OMultiplexed I/O & Peripheral Pin RB6/KBI2/PGC/RP9 (General)
25RB7/KBI3/PGD/RP10I/OMultiplexed I/O & Peripheral Pin RB7/KBI3/PGD/RP10 (General)
26MCLR#I/OMultiplexed I/O & Peripheral Pin MCLR# (General)
27IO47I/OGPIO47 / SPICLK_P_DIFF / SUBSPICLK_P_DIFF
28RA1/AN1/C2INA/RP1I/OMultiplexed I/O & Peripheral Pin RA1/AN1/C2INA/RP1 (General)
29EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 IO1
I/O
General Purpose Digital I/O Pin IO1
Design note: 3.3V logic domain (3.6V absolute max), 40mA max drive current.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 18 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) - 2. Standard Pinout (Top View)
True package pinout (29 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) - 4. Package Dimensions (D×E×A)
QFN-28-EP(6x6) · 6.00×6.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) - 5. Recommended Land Pattern
IPC-7351B Footprint (29 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (18 figures · Page 1/2)
Showing 1–12 of 18 uncropped original figures for PIC18LF25J50 / PIC18F25J50T
P1 · p01_fig01752×399px
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) — PIC18F46J50 Data Sheet
PIC18F46J50 Data Sheet
P1 · p01_fig01P1
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P2 · p02_fig011777×1640px
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) — DS39931D-page 2  2011 Microchip Technology Inc. | Trademarks | FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Inc
DS39931D-page 2  2011 Microchip Technology Inc. | Trademarks | FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Inc
P2 · p02_fig02788×285px
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) — ISBN: 978-1-61341-027-1
ISBN: 978-1-61341-027-1
P30 · p30_fig01867×940px
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) — FIGURE 2-2: EXAMPLE OF MCLR PIN CONNECTIONS
FIGURE 2-2: EXAMPLE OF MCLR PIN CONNECTIONS
P206 · p206_fig01867×768px
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) — FIGURE 13-3: OSCILLATOR CIRCUIT WITH GROUNDED GUARD RING
FIGURE 13-3: OSCILLATOR CIRCUIT WITH GROUNDED GUARD RING
P206 · p206_fig01P206
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) — Datasheet Page 206 (p206_fig01)
Datasheet Page 206 (p206_fig01)
P248 · p248_fig011703×619px
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) — FIGURE 18-1: CAPTURE MODE OPERATION BLOCK DIAGRAM
FIGURE 18-1: CAPTURE MODE OPERATION BLOCK DIAGRAM
P249 · p249_fig011550×597px
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) — FIGURE 18-2: COMPARE MODE OPERATION BLOCK DIAGRAM
FIGURE 18-2: COMPARE MODE OPERATION BLOCK DIAGRAM
P254 · p254_fig011536×1000px
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) — FIGURE 18-6: EXAMPLE PWM (ENHANCED MODE) OUTPUT RELATIONSHIPS (ACTIVE-HIGH STATE)
FIGURE 18-6: EXAMPLE PWM (ENHANCED MODE) OUTPUT RELATIONSHIPS (ACTIVE-HIGH STATE)
P254 · p254_fig01P254
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) — Datasheet Page 254 (p254_fig01)
Datasheet Page 254 (p254_fig01)
P274 · p274_fig011777×994px
PIC18LF25J50-I/ML (QFN-28-EP(6x6)) — FIGURE 19-2: SPI MASTER/SLAVE CONNECTION
FIGURE 19-2: SPI MASTER/SLAVE CONNECTION
Page 1 / 2 (18 extracted figures)

Technical Specifications & Part Details (PIC18LF25J50-I/ML)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC18LF25J50-I/ML (QFN-28-EP(6x6)) is a 28-pin standard electronic & interconnect component featuring a 6.00 × 6.00 × 0.85 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 2.0V to 3.6V supply operation across -10°C to +70°C with integrated USB, UART, SPI, I2C, ADC, PWM, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
2.0V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-10°C to +70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
32 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
6.00 × 6.00 × 0.85 mm (A1=0.03 mm)
Package family: QFN (QFN-28-EP(6x6))
Pin Count & Lead PitchN / e
28 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB, UART, SPI, I2C, ADC, PWM, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol29 auto-grouped pins
OK
IPC-7351B Land Pattern29 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteEPAD 3.70×3.70mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — PIC18LF25J50 / PIC18F25J50T (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (QFN-28-EP(6x6))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
6.00 × 6.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.65mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
29P / 29Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-28-EP(6x6)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC18LF25J50-I/ML (QFN-28-EP(6x6))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC18LF25J50-I/ML (QFN-28-EP(6x6))?

Manufactured by MICROCHIP, the PIC18LF25J50-I/ML is housed in a QFN-28-EP(6x6) package with 29 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 2.0V to 3.6V. Key pins include: 1 (IO1: General Purpose Digital I/O Pin IO1), 2 (RA3/AN3/VREF+/C1INB: Multiplexed I/O & Peripheral Pin RA3/AN3/VREF+/C1INB (General)), 3 (VDDCORE/VCAP: Power Supply Input (VDDCORE/VCAP — 2.0V to 3.6V)), 4 (NC: No Connect (Leave Floating)), 5 (VSS: Ground Reference Pin (VSS)), 6 (OSC1/CLKI/RA7: Multiplexed I/O & Peripheral Pin OSC1/CLKI/RA7 (RTC/CLK)).

What are the IPC-7351B PCB Footprint dimensions for PIC18LF25J50-I/ML?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC18LF25J50-I/ML (QFN-28-EP(6x6)) has a nominal body envelope of 6.00 × 6.00 mm, pitch e = 0.65 mm, and 29 copper pads plus a central exposed thermal pad (EPAD) of 3.70 × 3.70 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC18LF25J50-I/ML?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC18LF25J50-I/ML (MICROCHIP, QFN-28-EP(6x6)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (29 pins) & PIC18LF25J50 / PIC18F25J50T Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1IO1Digital_IOGeneral Purpose Digital I/O Pin IO1
2RA3/AN3/VREF+/C1INBAnalogSignal terminal RA3/AN3/VREF+/C1INB (Analog, 2.0V to 3.6V domain). Multiplexed alternate functions: RA3/AN3/VREF+/C1INB. Supported peripheral buses: General.
3VDDCORE/VCAPPower_InPrimary positive power supply input (VDDCORE/VCAP) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
4NCNo_ConnectNo Connect (Leave Floating)
5VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
6OSC1/CLKI/RA7Digital_IOSignal terminal OSC1/CLKI/RA7 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: OSC1/CLKI/RA7. Supported peripheral buses: RTC/CLK.
7OSC2/CLKO/RA6Digital_IOSignal terminal OSC2/CLKO/RA6 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: OSC2/CLKO/RA6. Supported peripheral buses: RTC/CLK.
8RC0/T1OSO/T1CKI/RP11Digital_IOSignal terminal RC0/T1OSO/T1CKI/RP11 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC0/T1OSO/T1CKI/RP11. Supported peripheral buses: General.
9RC1/T1OSI/UOE#/RP12Digital_IOSignal terminal RC1/T1OSI/UOE#/RP12 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC1/T1OSI/UOE#/RP12. Supported peripheral buses: General.
10RC2/AN11/CTPLS/RP13Digital_IOSignal terminal RC2/AN11/CTPLS/RP13 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC2/AN11/CTPLS/RP13. Supported peripheral buses: General.
11VUSBDigital_IOSignal terminal VUSB (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: VUSB. Supported peripheral buses: General.
12RC4/D-/VMDigital_IOSignal terminal RC4/D-/VM (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC4/D-/VM. Supported peripheral buses: USB.
13RC5/D+/VPDigital_IOSignal terminal RC5/D+/VP (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC5/D+/VP. Supported peripheral buses: USB.
14RC6/TX1/CK1/RP17Digital_IOSignal terminal RC6/TX1/CK1/RP17 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC6/TX1/CK1/RP17. Supported peripheral buses: General.
15RC7/RX1/DT1/SDO1/RP18Digital_IOSignal terminal RC7/RX1/DT1/SDO1/RP18 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC7/RX1/DT1/SDO1/RP18. Supported peripheral buses: General.
16VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
17VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
18RB0/AN12/INT0/RP3Digital_IOSignal terminal RB0/AN12/INT0/RP3 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB0/AN12/INT0/RP3. Supported peripheral buses: General.
19RB1/AN10/RTCC/RP4Digital_IOSignal terminal RB1/AN10/RTCC/RP4 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB1/AN10/RTCC/RP4. Supported peripheral buses: RTC/CLK.
20IO9Digital_IOGPIO9 / RTC_GPIO9 / TOUCH9 / ADC1_CH8 / FSPIHD
21RB3/AN9/CTEDG2/VPO/RP6Digital_IOSignal terminal RB3/AN9/CTEDG2/VPO/RP6 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB3/AN9/CTEDG2/VPO/RP6. Supported peripheral buses: General.
22RB4/KBI0/SCK1/SCL1/RP7Digital_IOSignal terminal RB4/KBI0/SCK1/SCL1/RP7 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB4/KBI0/SCK1/SCL1/RP7. Supported peripheral buses: SPI, I2C.
23RB5/KBI1/SDI1/SDA1/RP8Digital_IOSignal terminal RB5/KBI1/SDI1/SDA1/RP8 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB5/KBI1/SDI1/SDA1/RP8. Supported peripheral buses: I2C.
24RB6/KBI2/PGC/RP9Digital_IOSignal terminal RB6/KBI2/PGC/RP9 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB6/KBI2/PGC/RP9. Supported peripheral buses: General.
25RB7/KBI3/PGD/RP10Digital_IOSignal terminal RB7/KBI3/PGD/RP10 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB7/KBI3/PGD/RP10. Supported peripheral buses: General.
26MCLR#Digital_IOSignal terminal MCLR# (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: MCLR#. Supported peripheral buses: General.
27IO47Digital_IOGPIO47 / SPICLK_P_DIFF / SUBSPICLK_P_DIFF
28RA1/AN1/C2INA/RP1Digital_IOSignal terminal RA1/AN1/C2INA/RP1 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RA1/AN1/C2INA/RP1. Supported peripheral buses: General.
29EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.