SST26VF032BA-104I/SM (SOIC-8-208mil) — Symbol, Footprint IPC-7351B & 3D STEP Model

SST26VF032BA-104I/SM

MICROCHIPSOIC-8-208mil · 8 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SST26VF032BA-104I/SM (SOIC-8-208mil)1IOC2RES3BPNV4RES8VDD7WPEN6RES5RESGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=5.30mm · Pitch e=1.27mmD=5.30mm-6-5-4-3-2-10123456543210-1-2-3-4-5mm
3. 3D CAD MODEL
Package Body: 5.30mm × 5.30mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1IOCI/OMultiplexed I/O & Peripheral Pin IOC (SPI)
2RESI/OMultiplexed I/O & Peripheral Pin RES (General)
3BPNVI/OMultiplexed I/O & Peripheral Pin BPNV (General)
4RESI/OMultiplexed I/O & Peripheral Pin RES (General)
5RESI/OMultiplexed I/O & Peripheral Pin RES (General)
6RESI/OMultiplexed I/O & Peripheral Pin RES (General)
7WPENI/OMultiplexed I/O & Peripheral Pin WPEN (General)
8VDDPowerPower Supply Input (VDD — 2.7V-3.6V)
PIN 1 IOC
I/O
Multiplexed I/O & Peripheral Pin IOC (SPI)
Design note: I/O Configuration for SPI Mode 1 = WP# and HOLD# pins disabled 0 = WP# and HOLD# pins enabled
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 13 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SST26VF032BA-104I/SM (SOIC-8-208mil) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SST26VF032BA-104I/SM (SOIC-8-208mil) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SST26VF032BA-104I/SM (SOIC-8-208mil) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SST26VF032BA-104I/SM (SOIC-8-208mil) - 4. Package Dimensions (D×E×A)
SOIC-8-208mil · 5.30×5.30mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
SST26VF032BA-104I/SM (SOIC-8-208mil) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
SST26VF032BA-104I/SM (SOIC-8-208mil) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (13 figures · Page 1/2)
Showing 1–12 of 13 uncropped original figures for SST26VF032BA
P1 · p01_fig01443×240px
SST26VF032BA-104I/SM (SOIC-8-208mil) — 2.5V/3.0V 32-Mbit Serial Quad I/O™ (SQI™) Flash Memory
2.5V/3.0V 32-Mbit Serial Quad I/O™ (SQI™) Flash Memory
P4 · p04_fig01950×938px
SST26VF032BA-104I/SM (SOIC-8-208mil) — FIGURE 2-1: PIN ASSIGNMENTS
FIGURE 2-1: PIN ASSIGNMENTS
P4 · p04_fig01P4
SST26VF032BA-104I/SM (SOIC-8-208mil) — Datasheet Page 4 (p04_fig01)
Datasheet Page 4 (p04_fig01)
P49 · p49_fig01313×262px
SST26VF032BA-104I/SM (SOIC-8-208mil) — 24-Ball TBGA (6x8 mm) Example
24-Ball TBGA (6x8 mm) Example
P49 · p49_fig02378×287px
SST26VF032BA-104I/SM (SOIC-8-208mil) — 24-Ball TBGA (6x8 mm) Example
24-Ball TBGA (6x8 mm) Example
P49 · p49_fig03369×278px
SST26VF032BA-104I/SM (SOIC-8-208mil) — 24-Ball TBGA (6x8 mm) Example
24-Ball TBGA (6x8 mm) Example
P49 · p49_fig04291×241px
SST26VF032BA-104I/SM (SOIC-8-208mil) — 8-Lead WDFN (5x6 mm) Example
8-Lead WDFN (5x6 mm) Example
P49 · p49_fig05286×233px
SST26VF032BA-104I/SM (SOIC-8-208mil) — 8-Lead WDFN (5x6 mm) Example
8-Lead WDFN (5x6 mm) Example
P49 · p49_fig061777×1339px
SST26VF032BA-104I/SM (SOIC-8-208mil) — 8-Lead WDFN (5x6 mm) Example
8-Lead WDFN (5x6 mm) Example
P49 · p49_fig06P49
SST26VF032BA-104I/SM (SOIC-8-208mil) — Datasheet Page 49 (p49_fig06)
Datasheet Page 49 (p49_fig06)
P56 · p56_fig011622×769px
SST26VF032BA-104I/SM (SOIC-8-208mil) — Units Dimension Limits
Units Dimension Limits
P57 · p57_fig011012×825px
SST26VF032BA-104I/SM (SOIC-8-208mil) — RECOMMENDED LAND PATTERN
RECOMMENDED LAND PATTERN
Page 1 / 2 (13 extracted figures)

Technical Specifications & Part Details (SST26VF032BA-104I/SM)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SST26VF032BA-104I/SM (SOIC-8-208mil) is a 8-pin standard electronic & interconnect component featuring a 5.30 × 5.30 × 1.90 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 2.7V-3.6V supply operation across -40°C to +85°C with integrated SPI interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V-3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
104 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
5.30 × 5.30 × 1.90 mm (A1=0.15 mm)
Package family: SOIC (SOIC-8-208mil)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SOIC-8-208mil)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
5.30 × 5.30 mm
Height (A) & Pitch (e)IPC-7351B
A=1.90mm · e=1.27mm
Pad Size (W × L)Level B
0.60 × 1.95 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOIC-8-208mil
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SST26VF032BA-104I/SM (SOIC-8-208mil)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SST26VF032BA-104I/SM (SOIC-8-208mil)?

Manufactured by MICROCHIP, the SST26VF032BA-104I/SM is housed in a SOIC-8-208mil package with 8 pins and a 1.27 mm lead pitch, supporting a VCC supply range of 2.7V-3.6V. Key pins include: 1 (IOC: Multiplexed I/O & Peripheral Pin IOC (SPI)), 2 (RES: Multiplexed I/O & Peripheral Pin RES (General)), 3 (BPNV: Multiplexed I/O & Peripheral Pin BPNV (General)), 4 (RES: Multiplexed I/O & Peripheral Pin RES (General)), 5 (RES: Multiplexed I/O & Peripheral Pin RES (General)), 6 (RES: Multiplexed I/O & Peripheral Pin RES (General)).

What are the IPC-7351B PCB Footprint dimensions for SST26VF032BA-104I/SM?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SST26VF032BA-104I/SM (SOIC-8-208mil) has a nominal body envelope of 5.30 × 5.30 mm, pitch e = 1.27 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SST26VF032BA-104I/SM?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SST26VF032BA-104I/SM (MICROCHIP, SOIC-8-208mil) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & SST26VF032BA Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1IOCDigital_IOSignal terminal IOC (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: SPI_MODE. Supported peripheral buses: SPI.
2RESDigital_IOSignal terminal RES (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: RES. Supported peripheral buses: General.
3BPNVDigital_IOSignal terminal BPNV (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: BPNV. Supported peripheral buses: General.
4RESDigital_IOSignal terminal RES (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: RES. Supported peripheral buses: General.
5RESDigital_IOSignal terminal RES (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: RES. Supported peripheral buses: General.
6RESDigital_IOSignal terminal RES (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: RES. Supported peripheral buses: General.
7WPENDigital_IOSignal terminal WPEN (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: WPEN. Supported peripheral buses: General.
8VDDPower_InPrimary positive power supply input (VDD) operating in the 2.7V-3.6V domain (Max rating: 3.6V).