MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC5514-1.8YMT-T5

MICROCHIPDFN-6-EP(1.6x1.6) · 7 Pins · Pitch 0.50mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6))1EN2NC3VIN4VOUT7EP6GND5NCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
1234567E=1.60mm · Pitch e=0.50mmD=1.60mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 1.60mm × 1.60mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (7/7)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1ENISystem Enable & Hardware Reset (EN)
2NCI/OMultiplexed I/O & Peripheral Pin NC (General)
3VINPowerPower Supply Input (VIN — 2.5V to 5.5V)
4VOUTPowerRegulated Power Output (VOUT — 2.5V to 5.5V)
5NCI/OMultiplexed I/O & Peripheral Pin NC (General)
6GNDGNDGround Reference Pin (GND)
7EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 EN
I
System Enable & Hardware Reset (EN)
Design note: Enable Input: Active High. High = ON; Low = OFF. MIC5512 do not leave floating. MIC5514 has an internal 4MΩ pull down resistor and will disable VOUT when EN is floating.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 11 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) - 2. Standard Pinout (Top View)
True package pinout (7 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) - 4. Package Dimensions (D×E×A)
DFN-6-EP(1.6x1.6) · 1.60×1.60mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) - 5. Recommended Land Pattern
IPC-7351B Footprint (7 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (11 figures · Page 1/1)
Showing 1–11 of 11 uncropped original figures for MIC5514
P1 · p01_fig011306×443px
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) — Typical Application
Typical Application
P1 · p01_fig01P1
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P2 · p02_fig01492×250px
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) — 6-Pin 1.6mm × 1.6mm Thin DFN (MT) (Top View)
6-Pin 1.6mm × 1.6mm Thin DFN (MT) (Top View)
P4 · p04_fig012008×2071px
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) — Micrel, Inc. MIC5512/14 | Typical Characteristics | -100 | -90 | -80 | -70 | -60 | -50 | -40 | -30 | -20 | -10 | 0 | 10 100 1,000 10,000 100,0001,000,000 | PSRR (dB) | FREQUENCY (Hz) | Power Supply Rejection Ratio | COUT = 1µF CIN = 1µF VIN
Micrel, Inc. MIC5512/14 | Typical Characteristics | -100 | -90 | -80 | -70 | -60 | -50 | -40 | -30 | -20 | -10 | 0 | 10 100 1,000 10,000 100,0001,000,000 | PSRR (dB) | FREQUENCY (Hz) | Power Supply Rejection Ratio | COUT = 1µF CIN = 1µF VIN
P10 · p10_fig01981×531px
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) — Typical Application Schematic
Typical Application Schematic
P11 · p11_fig01989×952px
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) — PCB Layout Recommendations
PCB Layout Recommendations
P11 · p11_fig02987×957px
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) — Bottom Layer
Bottom Layer
P11 · p11_fig01P11
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) — Datasheet Page 11 (p11_fig01)
Datasheet Page 11 (p11_fig01)
P12 · p12_fig011561×1366px
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) — 6-Pin 1.6mm × 1.6mm Thin DFN (MT)
6-Pin 1.6mm × 1.6mm Thin DFN (MT)
P12 · p12_fig021942×607px
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) — April 8, 2013 12 Revision 1.1
April 8, 2013 12 Revision 1.1
P12 · p12_fig02P12
MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) — Datasheet Page 12 (p12_fig02)
Datasheet Page 12 (p12_fig02)

Technical Specifications & Part Details (MIC5514-1.8YMT-T5)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) is a 6-pin standard electronic & interconnect component featuring a 1.60 × 1.60 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2.5V to 5.5V supply operation across 40°C to 125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
2.5V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to 125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
1.60 × 1.60 × 0.85 mm (A1=0.03 mm)
Package family: DFN (DFN-6-EP(1.6x1.6))
Pin Count & Lead PitchN / e
6 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol7 auto-grouped pins
OK
IPC-7351B Land Pattern7 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (DFN-6-EP(1.6x1.6))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
1.60 × 1.60 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.58 mm
Pins / Total PadsTopology
7P / 7Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DFN-6-EP(1.6x1.6)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6))?

Manufactured by MICROCHIP, the MIC5514-1.8YMT-T5 is housed in a DFN-6-EP(1.6x1.6) package with 7 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.5V to 5.5V. Key pins include: 1 (EN: System Enable & Hardware Reset (EN)), 2 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 3 (VIN: Power Supply Input (VIN — 2.5V to 5.5V)), 4 (VOUT: Regulated Power Output (VOUT — 2.5V to 5.5V)), 5 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 6 (GND: Ground Reference Pin (GND)).

What are the IPC-7351B PCB Footprint dimensions for MIC5514-1.8YMT-T5?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC5514-1.8YMT-T5 (DFN-6-EP(1.6x1.6)) has a nominal body envelope of 1.60 × 1.60 mm, pitch e = 0.50 mm, and 7 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC5514-1.8YMT-T5?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC5514-1.8YMT-T5 (MICROCHIP, DFN-6-EP(1.6x1.6)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (7 pins) & MIC5514 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1ENDigital_IOChip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
2NCNCSignal terminal NC (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
3VINPower_InPrimary positive power supply input (VIN) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).
4VOUTPower_OutRegulated power output rail (VOUT) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).
5NCNCSignal terminal NC (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
6GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
7EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.