MIC4414YFT-T5 (TQFN-4(1.2x1.2)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC4414YFT-T5

MICROCHIPTQFN-4(1.2x1.2) · 4 Pins · Pitch 0.65mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC4414YFT-T5 (TQFN-4(1.2x1.2))1OUT2GND4VDD3INGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
1234E=7.00mm · Pitch e=0.65mmD=7.00mm-6-5-4-3-2-101234566543210-1-2-3-4-5-6mm
3. 3D CAD MODEL
Package Body: 7.00mm × 7.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (4/4)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1OUTI/OMultiplexed I/O & Peripheral Pin OUT (General)
2GNDGNDGround Reference Pin (GND)
3INI/OMultiplexed I/O & Peripheral Pin IN (General)
4VDDPowerPower Supply Input (VDD — 4.5V to 18V)
PIN 1 OUT
I/O
Multiplexed I/O & Peripheral Pin OUT (General)
Design note: Gate Output: Connection to gate of external MOSFET.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC4414YFT-T5 (TQFN-4(1.2x1.2)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC4414YFT-T5 (TQFN-4(1.2x1.2)) - 2. Standard Pinout (Top View)
True package pinout (4 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC4414YFT-T5 (TQFN-4(1.2x1.2)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC4414YFT-T5 (TQFN-4(1.2x1.2)) - 4. Package Dimensions (D×E×A)
TQFN-4(1.2x1.2) · 7.00×7.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC4414YFT-T5 (TQFN-4(1.2x1.2)) - 5. Recommended Land Pattern
IPC-7351B Footprint (4 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC4414YFT-T5 (TQFN-4(1.2x1.2)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for MIC4414 / MIC4415
P14 · p14_fig01EXACT PACKAGE
MIC4414YFT-T5 (TQFN-4(1.2x1.2)) — Package Information
Package Information
P1 · p01_fig01755×552px
MIC4414YFT-T5 (TQFN-4(1.2x1.2)) — Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
P2 · p02_fig01624×432px
MIC4414YFT-T5 (TQFN-4(1.2x1.2)) — 1.2mm x 1.2mm Thin QFN (Top View) Pin Description
1.2mm x 1.2mm Thin QFN (Top View) Pin Description
P13 · p13_fig01880×892px
MIC4414YFT-T5 (TQFN-4(1.2x1.2)) — Figure 5. MIC4414/15 Evaluation Board Top Layer
Figure 5. MIC4414/15 Evaluation Board Top Layer
P13 · p13_fig02878×891px
MIC4414YFT-T5 (TQFN-4(1.2x1.2)) — Figure 5. MIC4414/15 Evaluation Board Top Layer
Figure 5. MIC4414/15 Evaluation Board Top Layer
P13 · p13_fig01P13
MIC4414YFT-T5 (TQFN-4(1.2x1.2)) — Datasheet Page 13 (p13_fig01)
Datasheet Page 13 (p13_fig01)

Technical Specifications & Part Details (MIC4414YFT-T5)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC4414YFT-T5 (TQFN-4(1.2x1.2)) is a 4-pin standard electronic & interconnect component featuring a 7.00 × 7.00 × 0.90 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 4.5V to 18V supply operation across 40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
4.5V to 18V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
7.00 × 7.00 × 0.90 mm (A1=0.03 mm)
Package family: QFN (TQFN-4(1.2x1.2))
Pin Count & Lead PitchN / e
4 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol4 auto-grouped pins
OK
IPC-7351B Land Pattern4 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MIC4414 / MIC4415 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (TQFN-4(1.2x1.2))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
7.00 × 7.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.65mm
Pad Size (W × L)Level B
0.36 × 0.80 mm
Pins / Total PadsTopology
4P / 4Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TQFN-4(1.2x1.2)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC4414YFT-T5 (TQFN-4(1.2x1.2))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC4414YFT-T5 (TQFN-4(1.2x1.2))?

Manufactured by MICROCHIP, the MIC4414YFT-T5 is housed in a TQFN-4(1.2x1.2) package with 4 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 4.5V to 18V. Key pins include: 1 (OUT: Multiplexed I/O & Peripheral Pin OUT (General)), 2 (GND: Ground Reference Pin (GND)), 3 (IN: Multiplexed I/O & Peripheral Pin IN (General)), 4 (VDD: Power Supply Input (VDD — 4.5V to 18V)).

What are the IPC-7351B PCB Footprint dimensions for MIC4414YFT-T5?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC4414YFT-T5 (TQFN-4(1.2x1.2)) has a nominal body envelope of 7.00 × 7.00 mm, pitch e = 0.65 mm, and 4 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC4414YFT-T5?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC4414YFT-T5 (MICROCHIP, TQFN-4(1.2x1.2)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (4 pins) & MIC4414 / MIC4415 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1OUTDigital_IOSignal terminal OUT (I/O, 4.5V to 18V domain). Multiplexed alternate functions: OUT. Supported peripheral buses: General.
2GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
3INDigital_IOSignal terminal IN (I/O, 4.5V to 18V domain). Multiplexed alternate functions: IN. Supported peripheral buses: General.
4VDDPower_InPrimary positive power supply input (VDD) operating in the 4.5V to 18V domain (Max rating: 18.0V).