MIC2870YFT-T5 (QFN-16-EP(2x2)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC2870YFT-T5

MICROCHIPQFN-16-EP(2x2) · 17 Pins · Pitch 0.40mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC2870YFT-T5 (QFN-16-EP(2x2))1SCL2V IN3FEN4FI5FRSET6AGND7PGND8TRSET9LED217EP16SDA15PGND14SW13EN12OUT11TEN10LED1Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.817.812.77.62.5-2.5-7.6-12.7-17.8mm
2. 2D FOOTPRINT
1234567891011121314151617E=2.00mm · Pitch e=0.40mmD=2.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 2.00mm × 2.00mm · Pitch: 0.40mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (17/17)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1SCLI/OMultiplexed I/O & Peripheral Pin SCL (I2C)
2V INI/OMultiplexed I/O & Peripheral Pin V IN (General)
3FENI/OMultiplexed I/O & Peripheral Pin FEN (General)
4FII/OMultiplexed I/O & Peripheral Pin FI (General)
5FRSETI/OMultiplexed I/O & Peripheral Pin FRSET (CAN)
6AGNDGNDGround Reference Pin (AGND)
7PGNDGNDGround Reference Pin (PGND)
8TRSETI/OMultiplexed I/O & Peripheral Pin TRSET (CAN)
9LED2I/OMultiplexed I/O & Peripheral Pin LED2 (General)
10LED1I/OMultiplexed I/O & Peripheral Pin LED1 (General)
11TENI/OMultiplexed I/O & Peripheral Pin TEN (General)
12OUTI/OMultiplexed I/O & Peripheral Pin OUT (General)
13ENISystem Enable & Hardware Reset (EN)
14SWI/OMultiplexed I/O & Peripheral Pin SW (General)
15PGNDGNDGround Reference Pin (PGND)
16SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
17EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 SCL
I/O
Multiplexed I/O & Peripheral Pin SCL (I2C)
Design note: High-Speed Mode (3.4 MHz) I2C Clock Input.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 7 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC2870YFT-T5 (QFN-16-EP(2x2)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC2870YFT-T5 (QFN-16-EP(2x2)) - 2. Standard Pinout (Top View)
True package pinout (17 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC2870YFT-T5 (QFN-16-EP(2x2)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC2870YFT-T5 (QFN-16-EP(2x2)) - 4. Package Dimensions (D×E×A)
QFN-16-EP(2x2) · 2.00×2.00mm · Pitch 0.40mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC2870YFT-T5 (QFN-16-EP(2x2)) - 5. Recommended Land Pattern
IPC-7351B Footprint (17 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC2870YFT-T5 (QFN-16-EP(2x2)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (7 figures · Page 1/1)
Showing 1–7 of 7 uncropped original figures for MIC2870
P1 · p01_fig01376×200px
MIC2870YFT-T5 (QFN-16-EP(2x2)) — 1.5A Synchronous Boost Flash LED Driver with
1.5A Synchronous Boost Flash LED Driver with
P2 · p02_fig011293×1420px
MIC2870YFT-T5 (QFN-16-EP(2x2)) — Typical Application Schematic
Typical Application Schematic
P2 · p02_fig021029×693px
MIC2870YFT-T5 (QFN-16-EP(2x2)) — Typical Application Schematic
Typical Application Schematic
P2 · p02_fig01P2
MIC2870YFT-T5 (QFN-16-EP(2x2)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P17 · p17_fig01867×328px
MIC2870YFT-T5 (QFN-16-EP(2x2)) — 5.3 Overvoltage Protection
5.3 Overvoltage Protection
P25 · p25_fig011361×1361px
MIC2870YFT-T5 (QFN-16-EP(2x2)) — 9.1 Package Marking Information
9.1 Package Marking Information
P25 · p25_fig01P25
MIC2870YFT-T5 (QFN-16-EP(2x2)) — Datasheet Page 25 (p25_fig01)
Datasheet Page 25 (p25_fig01)

Technical Specifications & Part Details (MIC2870YFT-T5)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC2870YFT-T5 (QFN-16-EP(2x2)) is a 16-pin standard electronic & interconnect component featuring a 2.00 × 2.00 × 0.85 mm mechanical envelope (lead pitch e = 0.40 mm). Rated for 2.7V to 5.0V supply operation across 40°C to +125°C with integrated I2C, CAN interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 5.0V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
2 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.00 × 2.00 × 0.85 mm (A1=0.03 mm)
Package family: QFN (QFN-16-EP(2x2))
Pin Count & Lead PitchN / e
16 Pins | Pitch e = 0.40 mm (15.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C, CAN
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol17 auto-grouped pins
OK
IPC-7351B Land Pattern17 pads · Pitch 0.40mm
OK
IPC-7525 60% Solder PasteEPAD 0.70×0.70mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (QFN-16-EP(2x2))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.40mm
Pad Size (W × L)Level B
0.22 × 0.65 mm
Pins / Total PadsTopology
17P / 17Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-16-EP(2x2)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC2870YFT-T5 (QFN-16-EP(2x2))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC2870YFT-T5 (QFN-16-EP(2x2))?

Manufactured by MICROCHIP, the MIC2870YFT-T5 is housed in a QFN-16-EP(2x2) package with 17 pins and a 0.40 mm lead pitch, supporting a VCC supply range of 2.7V to 5.0V. Key pins include: 1 (SCL: Multiplexed I/O & Peripheral Pin SCL (I2C)), 2 (V IN: Multiplexed I/O & Peripheral Pin V IN (General)), 3 (FEN: Multiplexed I/O & Peripheral Pin FEN (General)), 4 (FI: Multiplexed I/O & Peripheral Pin FI (General)), 5 (FRSET: Multiplexed I/O & Peripheral Pin FRSET (CAN)), 6 (AGND: Ground Reference Pin (AGND)).

What are the IPC-7351B PCB Footprint dimensions for MIC2870YFT-T5?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC2870YFT-T5 (QFN-16-EP(2x2)) has a nominal body envelope of 2.00 × 2.00 mm, pitch e = 0.40 mm, and 17 copper pads plus a central exposed thermal pad (EPAD) of 0.70 × 0.70 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC2870YFT-T5?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC2870YFT-T5 (MICROCHIP, QFN-16-EP(2x2)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (17 pins) & MIC2870 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1SCLDigital_IOSignal terminal SCL (I/O, 2.7V to 5.0V domain). Multiplexed alternate functions: I2C_CLOCK. Supported peripheral buses: I2C.
2V INDigital_IOSignal terminal V IN (I/O, 2.7V to 5.0V domain). Multiplexed alternate functions: V IN. Supported peripheral buses: General.
3FENDigital_IOSignal terminal FEN (I/O, 2.7V to 5.0V domain). Multiplexed alternate functions: FEN. Supported peripheral buses: General.
4FIDigital_IOSignal terminal FI (I/O, 2.7V to 5.0V domain). Multiplexed alternate functions: FI. Supported peripheral buses: General.
5FRSETDigital_IOSignal terminal FRSET (I/O, 2.7V to 5.0V domain). Multiplexed alternate functions: FRSET. Supported peripheral buses: CAN.
6AGNDGND0V electrical ground return terminal (AGND) for internal core logic, I/O drivers, and analog sub-blocks.
7PGNDGND0V electrical ground return terminal (PGND) for internal core logic, I/O drivers, and analog sub-blocks.
8TRSETDigital_IOSignal terminal TRSET (I/O, 2.7V to 5.0V domain). Multiplexed alternate functions: TRSET. Supported peripheral buses: CAN.
9LED2Digital_IOSignal terminal LED2 (I/O, 2.7V to 5.0V domain). Multiplexed alternate functions: LED2. Supported peripheral buses: General.
10LED1Digital_IOSignal terminal LED1 (I/O, 2.7V to 5.0V domain). Multiplexed alternate functions: LED1. Supported peripheral buses: General.
11TENDigital_IOSignal terminal TEN (I/O, 2.7V to 5.0V domain). Multiplexed alternate functions: TEN. Supported peripheral buses: General.
12OUTDigital_IOSignal terminal OUT (I/O, 2.7V to 5.0V domain). Multiplexed alternate functions: OUT. Supported peripheral buses: General.
13ENDigital_IOChip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
14SWDigital_IOSignal terminal SW (I/O, 2.7V to 5.0V domain). Multiplexed alternate functions: SW. Supported peripheral buses: General.
15PGNDGND0V electrical ground return terminal (PGND) for internal core logic, I/O drivers, and analog sub-blocks.
16SDADigital_IOSignal terminal SDA (I/O, 2.7V to 5.0V domain). Multiplexed alternate functions: I2C_DATA. Supported peripheral buses: I2C.
17EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.