TC1263-5.0VETTR (D2PAK-5) — Symbol, Footprint IPC-7351B & 3D STEP Model

TC1263-5.0VETTR

MICROCHIPD2PAK-5 · 6 Pins · Pitch 1.70mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · TC1263-5.0VETTR (D2PAK-5)1BYPASS2SHDN3GND6TAB5V OUT4V INGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
654321E=9.00mm · Pitch e=1.70mmD=10.10mm-14-12-10-8-6-4-2024681097531-1-3-5-7-9mm
3. 3D CAD MODEL
Package Body: 9.00mm × 10.10mm · Pitch: 1.70mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (6/6)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1BYPASSI/OMultiplexed I/O & Peripheral Pin BYPASS (General)
2SHDNI/OMultiplexed I/O & Peripheral Pin SHDN (General)
3GNDGNDGround Reference Pin (GND)
4V INI/OMultiplexed I/O & Peripheral Pin V IN (General)
5V OUTI/OMultiplexed I/O & Peripheral Pin V OUT (General)
6TABI/OMultiplexed I/O & Peripheral Pin TAB (General)
PIN 1 BYPASS
I/O
Multiplexed I/O & Peripheral Pin BYPASS (General)
Design note: Reference bypass input
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
TC1263-5.0VETTR (D2PAK-5) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
TC1263-5.0VETTR (D2PAK-5) - 2. Standard Pinout (Top View)
True package pinout (6 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
TC1263-5.0VETTR (D2PAK-5) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
TC1263-5.0VETTR (D2PAK-5) - 4. Package Dimensions (D×E×A)
D2PAK-5 · 9.00×10.10mm · Pitch 1.70mmExpand ›
5. Recommended Land PatternLAND PATTERN
TC1263-5.0VETTR (D2PAK-5) - 5. Recommended Land Pattern
IPC-7351B Footprint (6 Pads)Expand ›
6. Application SchematicSCHEMATIC
TC1263-5.0VETTR (D2PAK-5) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for TC1263
P1 · p01_fig011777×1034px
TC1263-5.0VETTR (D2PAK-5) — • Battery-Operated Systems • Portable Computers • Medical Instruments • Instrumentation • Cellular/GSM/PHS Phones • Linear Post-Regulators for SMPS • Pagers | Typical Application | Package Type | TC1263 | VIN VOUT C1 1 µF | GND | VOUT VIN |
• Battery-Operated Systems • Portable Computers • Medical Instruments • Instrumentation • Cellular/GSM/PHS Phones • Linear Post-Regulators for SMPS • Pagers | Typical Application | Package Type | TC1263 | VIN VOUT C1 1 µF | GND | VOUT VIN |
P1 · p01_fig01P1
TC1263-5.0VETTR (D2PAK-5) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P7 · p07_fig011777×851px
TC1263-5.0VETTR (D2PAK-5) — Figure 4-1 shows a typical application circuit.
Figure 4-1 shows a typical application circuit.
P10 · p10_fig011777×2735px
TC1263-5.0VETTR (D2PAK-5) — TC1263 | DS21374D-page 10  2002-2012 Microchip Technology Inc. | 5-Lead Plastic (ET) (DDPAK) | BOTTOM VIEW | TOP VIEW | E | D | b | E1 | D2 | A | A1 | c2 | c L | D1 | e | θ1 | θ | (5X) | L3 | 1 | § Significant Characteristic | Drawing No.
TC1263 | DS21374D-page 10  2002-2012 Microchip Technology Inc. | 5-Lead Plastic (ET) (DDPAK) | BOTTOM VIEW | TOP VIEW | E | D | b | E1 | D2 | A | A1 | c2 | c L | D1 | e | θ1 | θ | (5X) | L3 | 1 | § Significant Characteristic | Drawing No.
P9 · p09_fig01All Packages in PDF
TC1263-5.0VETTR (D2PAK-5) — TC1263
TC1263
P11 · p11_fig01All Packages in PDF
TC1263-5.0VETTR (D2PAK-5) —  2002-2012 Microchip Technology Inc. DS21374D-page 11 | TC1263 | 5-Lead Plastic Transistor Outline (AT) (TO-220) | L H1 | Q | E | b | e1 | e | C1 | J1 | F | A | D | a (5X) | ØP EJECTOR PIN | e3 | Drawing No. C04-036 | Notes: Dimensions D a
 2002-2012 Microchip Technology Inc. DS21374D-page 11 | TC1263 | 5-Lead Plastic Transistor Outline (AT) (TO-220) | L H1 | Q | E | b | e1 | e | C1 | J1 | F | A | D | a (5X) | ØP EJECTOR PIN | e3 | Drawing No. C04-036 | Notes: Dimensions D a

Technical Specifications & Part Details (TC1263-5.0VETTR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:TC1263-5.0VETTR (D2PAK-5) is a 5-pin standard electronic & interconnect component featuring a 10.10 × 9.00 × 4.50 mm mechanical envelope (lead pitch e = 1.70 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -65°C to +150°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-65°C to +150°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
500 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
10.10 × 9.00 × 4.50 mm (A1=0.08 mm)
Package family: TO263 (D2PAK-5)
Pin Count & Lead PitchN / e
5 Pins | Pitch e = 1.70 mm (66.9 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol6 auto-grouped pins
OK
IPC-7351B Land Pattern6 pads · Pitch 1.70mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (D2PAK-5)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
10.10 × 9.00 mm
Height (A) & Pitch (e)IPC-7351B
A=4.50mm · e=1.70mm
Pad Size (W × L)Level B
1.02 × 3.80 mm
Pins / Total PadsTopology
6P / 6Pad (SOT_TAB)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
D2PAK-5
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — TC1263-5.0VETTR (D2PAK-5)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of TC1263-5.0VETTR (D2PAK-5)?

Manufactured by MICROCHIP, the TC1263-5.0VETTR is housed in a D2PAK-5 package with 6 pins and a 1.70 mm lead pitch. Key pins include: 1 (BYPASS: Multiplexed I/O & Peripheral Pin BYPASS (General)), 2 (SHDN: Multiplexed I/O & Peripheral Pin SHDN (General)), 3 (GND: Ground Reference Pin (GND)), 4 (V IN: Multiplexed I/O & Peripheral Pin V IN (General)), 5 (V OUT: Multiplexed I/O & Peripheral Pin V OUT (General)), 6 (TAB: Multiplexed I/O & Peripheral Pin TAB (General)).

What are the IPC-7351B PCB Footprint dimensions for TC1263-5.0VETTR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), TC1263-5.0VETTR (D2PAK-5) has a nominal body envelope of 9.00 × 10.10 mm, pitch e = 1.70 mm, and 6 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for TC1263-5.0VETTR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for TC1263-5.0VETTR (MICROCHIP, D2PAK-5) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (6 pins) & TC1263 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1BYPASSDigital_IOSignal terminal BYPASS (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BYPASS. Supported peripheral buses: General.
2SHDNDigital_IOSignal terminal SHDN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: SHDN. Supported peripheral buses: General.
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4V INDigital_IOSignal terminal V IN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: V IN. Supported peripheral buses: General.
5V OUTDigital_IOSignal terminal V OUT (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: V OUT. Supported peripheral buses: General.
6TABDigital_IOSignal terminal TAB (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TAB. Supported peripheral buses: General.