SY89323LMG-TR (MLF-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

SY89323LMG-TR

MICROCHIPMLF-8 · 9 Pins · Pitch 0.50mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SY89323LMG-TR (MLF-8)1IN02/IN03/IN14IN15GND9EP8VCC7Q06Q1Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=2.00mm · Pitch e=0.50mmD=2.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 2.00mm × 2.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1IN0I/OMultiplexed I/O & Peripheral Pin IN0 (General)
2/IN0I/OMultiplexed I/O & Peripheral Pin /IN0 (General)
3/IN1I/OMultiplexed I/O & Peripheral Pin /IN1 (General)
4IN1I/OMultiplexed I/O & Peripheral Pin IN1 (General)
5GNDGNDGround Reference Pin (GND)
6Q1I/OMultiplexed I/O & Peripheral Pin Q1 (General)
7Q0I/OMultiplexed I/O & Peripheral Pin Q0 (General)
8VCCPowerPower Supply Input (VCC — 3.0V to 3.6V)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 IN0
I/O
Multiplexed I/O & Peripheral Pin IN0 (General)
Design note: Signal terminal IN0 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: IN0. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 3 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SY89323LMG-TR (MLF-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SY89323LMG-TR (MLF-8) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SY89323LMG-TR (MLF-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SY89323LMG-TR (MLF-8) - 4. Package Dimensions (D×E×A)
MLF-8 · 2.00×2.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
SY89323LMG-TR (MLF-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
SY89323LMG-TR (MLF-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (3 figures · Page 1/1)
Showing 1–3 of 3 uncropped original figures for SY89323
P5 · p05_fig01EXACT PACKAGE
SY89323LMG-TR (MLF-8) — 5 | Precision Edge® SY89323L Micrel, Inc. | M9999-051006 hbwhelp@micrel.com or (408) 955-1690 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | © 2006 Micrel, Incorporated. | 8-PIN ULTRA-SMALL EPAD-MicroLeadFrame® (MLF-8) | Package
5 | Precision Edge® SY89323L Micrel, Inc. | M9999-051006 hbwhelp@micrel.com or (408) 955-1690 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | © 2006 Micrel, Incorporated. | 8-PIN ULTRA-SMALL EPAD-MicroLeadFrame® (MLF-8) | Package
P1 · p01_fig012038×2808px
SY89323LMG-TR (MLF-8) — 1 | Precision Edge® SY89323L Micrel, Inc. | M9999-051006 hbwhelp@micrel.com or (408) 955-1690 | DESCRIPTION | FEATURES | Precision Edge® | SY89323L | Rev.: C Amendment: /0 | Issue Date: May 2006 | Precision Edge® | Precision Edge is a regis
1 | Precision Edge® SY89323L Micrel, Inc. | M9999-051006 hbwhelp@micrel.com or (408) 955-1690 | DESCRIPTION | FEATURES | Precision Edge® | SY89323L | Rev.: C Amendment: /0 | Issue Date: May 2006 | Precision Edge® | Precision Edge is a regis
P5 · p05_fig01P5
SY89323LMG-TR (MLF-8) — Datasheet Page 5 (p05_fig01)
Datasheet Page 5 (p05_fig01)

Technical Specifications & Part Details (SY89323LMG-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SY89323LMG-TR (MLF-8) is a 8-pin standard electronic & interconnect component featuring a 2.00 × 2.00 × 0.75 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 3.0V to 3.6V supply operation across 65°C to +150°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
3.0V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
65°C to +150°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
275MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.00 × 2.00 × 0.75 mm (A1=0.02 mm)
Package family: OTHER (MLF-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MLF-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.75mm · e=0.50mm
Pad Size (W × L)Level B
0.25 × 0.60 mm
Pins / Total PadsTopology
9P / 9Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MLF-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SY89323LMG-TR (MLF-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SY89323LMG-TR (MLF-8)?

Manufactured by MICROCHIP, the SY89323LMG-TR is housed in a MLF-8 package with 9 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 3.0V to 3.6V. Key pins include: 1 (IN0: Multiplexed I/O & Peripheral Pin IN0 (General)), 2 (/IN0: Multiplexed I/O & Peripheral Pin /IN0 (General)), 3 (/IN1: Multiplexed I/O & Peripheral Pin /IN1 (General)), 4 (IN1: Multiplexed I/O & Peripheral Pin IN1 (General)), 5 (GND: Ground Reference Pin (GND)), 6 (Q1: Multiplexed I/O & Peripheral Pin Q1 (General)).

What are the IPC-7351B PCB Footprint dimensions for SY89323LMG-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SY89323LMG-TR (MLF-8) has a nominal body envelope of 2.00 × 2.00 mm, pitch e = 0.50 mm, and 9 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SY89323LMG-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SY89323LMG-TR (MICROCHIP, MLF-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & SY89323 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1IN0Digital_IOSignal terminal IN0 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: IN0. Supported peripheral buses: General.
2/IN0Digital_IOSignal terminal /IN0 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: /IN0. Supported peripheral buses: General.
3/IN1Digital_IOSignal terminal /IN1 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: /IN1. Supported peripheral buses: General.
4IN1Digital_IOSignal terminal IN1 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: IN1. Supported peripheral buses: General.
5GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
6Q1Digital_IOSignal terminal Q1 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: Q1. Supported peripheral buses: General.
7Q0Digital_IOSignal terminal Q0 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: Q0. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 3.0V to 3.6V domain (Max rating: 3.6V).
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.