SY58605UMG-TR (UDFN-8-EP(2x2)) — Symbol, Footprint IPC-7351B & 3D STEP Model

SY58605UMG-TR

MICROCHIPUDFN-8-EP(2x2) · 9 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · SY58605UMG-TR (UDFN-8-EP(2x2))1IN, /IN2VT3VREF-AC4IN, /IN5GND, Exposed9EP8VCC7/Q, Q6/Q, QGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=2.00mm · Pitch e=0.50mmD=2.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 2.00mm × 2.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1IN, /INI/OMultiplexed I/O & Peripheral Pin IN, /IN (General)
2VTI/OMultiplexed I/O & Peripheral Pin VT (General)
3VREF-ACAnalogMultiplexed I/O & Peripheral Pin VREF-AC (General)
4IN, /INI/OMultiplexed I/O & Peripheral Pin IN, /IN (General)
5GND, Exposed padGNDGround Reference Pin (GND, Exposed pad)
6/Q, QI/OMultiplexed I/O & Peripheral Pin /Q, Q (General)
7/Q, QI/OMultiplexed I/O & Peripheral Pin /Q, Q (General)
8VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 IN, /IN
I/O
Multiplexed I/O & Peripheral Pin IN, /IN (General)
Design note: Differential Input: This input pair is the differential signal input to the device. Input accepts DC-coupled differential signals as small as 100mV(200mV ). Each pin of PP this pair internally terminates with 50Ω to the VT pin. If the input
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 5 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
SY58605UMG-TR (UDFN-8-EP(2x2)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
SY58605UMG-TR (UDFN-8-EP(2x2)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
SY58605UMG-TR (UDFN-8-EP(2x2)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
SY58605UMG-TR (UDFN-8-EP(2x2)) - 4. Package Dimensions (D×E×A)
UDFN-8-EP(2x2) · 2.00×2.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
SY58605UMG-TR (UDFN-8-EP(2x2)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
SY58605UMG-TR (UDFN-8-EP(2x2)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (5 figures · Page 1/1)
Showing 1–5 of 5 uncropped original figures for SY58605
P1 · p01_fig01700×136px
SY58605UMG-TR (UDFN-8-EP(2x2)) — General Description
General Description
P1 · p01_fig02688×342px
SY58605UMG-TR (UDFN-8-EP(2x2)) — Functional Block Diagram
Functional Block Diagram
P2 · p02_fig01455×255px
SY58605UMG-TR (UDFN-8-EP(2x2)) — 8-Pin DFN Pin Description
8-Pin DFN Pin Description
P12 · p12_fig011870×1324px
SY58605UMG-TR (UDFN-8-EP(2x2)) — 8-Pin (2mm x 2mm) DFN
8-Pin (2mm x 2mm) DFN
P12 · p12_fig021956×602px
SY58605UMG-TR (UDFN-8-EP(2x2)) — August 2007 12 M9999-082907-B hbwhelp@micrel.com or (408) 955-1690 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | TEL +1 (408) 944-0800 FAX +1 (408) 474-1000 WEB http://www.micrel.com | © 2006 Micrel, Incorporated.
August 2007 12 M9999-082907-B hbwhelp@micrel.com or (408) 955-1690 | MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA | TEL +1 (408) 944-0800 FAX +1 (408) 474-1000 WEB http://www.micrel.com | © 2006 Micrel, Incorporated.

Technical Specifications & Part Details (SY58605UMG-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:SY58605UMG-TR (UDFN-8-EP(2x2)) is a 8-pin standard electronic & interconnect component featuring a 2.00 × 2.00 × 0.80 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across 40°C to +85°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
2GHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.00 × 2.00 × 0.80 mm (A1=0.03 mm)
Package family: DFN (UDFN-8-EP(2x2))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 0.90×1.70mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (UDFN-8-EP(2x2))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.80mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.51 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
UDFN-8-EP(2x2)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — SY58605UMG-TR (UDFN-8-EP(2x2))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of SY58605UMG-TR (UDFN-8-EP(2x2))?

Manufactured by MICROCHIP, the SY58605UMG-TR is housed in a UDFN-8-EP(2x2) package with 9 pins and a 0.50 mm lead pitch. Key pins include: 1 (IN, /IN: Multiplexed I/O & Peripheral Pin IN, /IN (General)), 2 (VT: Multiplexed I/O & Peripheral Pin VT (General)), 3 (VREF-AC: Multiplexed I/O & Peripheral Pin VREF-AC (General)), 4 (IN, /IN: Multiplexed I/O & Peripheral Pin IN, /IN (General)), 5 (GND, Exposed pad: Ground Reference Pin (GND, Exposed pad)), 6 (/Q, Q: Multiplexed I/O & Peripheral Pin /Q, Q (General)).

What are the IPC-7351B PCB Footprint dimensions for SY58605UMG-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), SY58605UMG-TR (UDFN-8-EP(2x2)) has a nominal body envelope of 2.00 × 2.00 mm, pitch e = 0.50 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 0.90 × 1.70 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for SY58605UMG-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for SY58605UMG-TR (MICROCHIP, UDFN-8-EP(2x2)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & SY58605 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1IN, /INDigital_IOSignal terminal IN, /IN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: IN, /IN. Supported peripheral buses: General.
2VTDigital_IOSignal terminal VT (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VT. Supported peripheral buses: General.
3VREF-ACAnalogSignal terminal VREF-AC (Analog, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VREF-AC. Supported peripheral buses: General.
4IN, /INDigital_IOSignal terminal IN, /IN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: IN, /IN. Supported peripheral buses: General.
5GND, Exposed padGND0V electrical ground return terminal (GND, Exposed pad) for internal core logic, I/O drivers, and analog sub-blocks.
6/Q, QDigital_IOSignal terminal /Q, Q (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: /Q, Q. Supported peripheral buses: General.
7/Q, QDigital_IOSignal terminal /Q, Q (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: /Q, Q. Supported peripheral buses: General.
8VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.