MCP130-485HI/TO (TO-92-3) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP130-485HI/TO

MICROCHIPTO-92-3 · 3 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP130-485HI/TO (TO-92-3)1VDD2RST#3VSSGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
123E=4.60mm · Pitch e=1.27mmD=3.60mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.60mm × 3.60mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (3/3)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VDDPowerPower Supply Input (VDD — 3.3V / 5.0V Standard Logic)
2RST#I/OMultiplexed I/O & Peripheral Pin RST# (General)
3VSSGNDGround Reference Pin (VSS)
PIN 1 VDD
Power
Power Supply Input (VDD — 3.3V / 5.0V Standard Logic)
Design note: Primary positive power supply input (VDD) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP130-485HI/TO (TO-92-3) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP130-485HI/TO (TO-92-3) - 2. Standard Pinout (Top View)
True package pinout (3 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP130-485HI/TO (TO-92-3) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP130-485HI/TO (TO-92-3) - 4. Package Dimensions (D×E×A)
TO-92-3 · 4.60×3.60mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP130-485HI/TO (TO-92-3) - 5. Recommended Land Pattern
IPC-7351B Footprint (3 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP130-485HI/TO (TO-92-3) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for MCP130 / MCP120
P1 · p01_fig01EXACT PACKAGE
MCP130-485HI/TO (TO-92-3) — -
-
P6 · p06_fig01EXACT PACKAGE
MCP130-485HI/TO (TO-92-3) — Mark Part Number Mark Part Number
Mark Part Number Mark Part Number
P1 · p01_fig02870×609px
MCP130-485HI/TO (TO-92-3) — MCP120 MCP130
MCP120 MCP130
P4 · p04_fig011777×1535px
MCP130-485HI/TO (TO-92-3) — Figure 2-2: Typical Transient Response
Figure 2-2: Typical Transient Response
P4 · p04_fig01P4
MCP130-485HI/TO (TO-92-3) — Datasheet Page 4 (p04_fig01)
Datasheet Page 4 (p04_fig01)
P5 · p05_fig011777×2558px
MCP130-485HI/TO (TO-92-3) — Figure 2-7: Normalized IOL vs. Temperature
Figure 2-7: Normalized IOL vs. Temperature
P6 · p06_fig01P6
MCP130-485HI/TO (TO-92-3) — Datasheet Page 6 (p06_fig01)
Datasheet Page 6 (p06_fig01)
P8 · p08_fig011441×1776px
MCP130-485HI/TO (TO-92-3) — 2 | 1 | p | D B | n | E | E1 | L | c | β | φ | α | A2 A | A1 | p1 | * Controlling Parameter | Notes: Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010” (0.254mm) per side. JEDEC Eq
2 | 1 | p | D B | n | E | E1 | L | c | β | φ | α | A2 A | A1 | p1 | * Controlling Parameter | Notes: Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010” (0.254mm) per side. JEDEC Eq
P9 · p09_fig011441×1789px
MCP130-485HI/TO (TO-92-3) — Foot Angle φ 0 4 8 0 4 8 | 15 12 0 15 12 0 β Mold Draft Angle Bottom 15 12 0 15 12 0 α Mold Draft Angle Top 0.51 0.42 0.33 .020 .017 .013 B Lead Width 0.25 0.23 0.20 .010 .009 .008 c Lead Thickness | 2 | 1 | D | n | p | B | E | E1 | h | L β
Foot Angle φ 0 4 8 0 4 8 | 15 12 0 15 12 0 β Mold Draft Angle Bottom 15 12 0 15 12 0 α Mold Draft Angle Top 0.51 0.42 0.33 .020 .017 .013 B Lead Width 0.25 0.23 0.20 .010 .009 .008 c Lead Thickness | 2 | 1 | D | n | p | B | E | E1 | h | L β
P6 · p06_fig02All Packages in PDF
MCP130-485HI/TO (TO-92-3) — SOT23 PARTS LABELING:
SOT23 PARTS LABELING:

Technical Specifications & Part Details (MCP130-485HI/TO)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP130-485HI/TO (TO-92-3) is a 3-pin standard electronic & interconnect component featuring a 4.60 × 3.60 × 4.60 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C to +85°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.60 × 3.60 × 4.60 mm (A1=1.50 mm)
Package family: TO92 (TO-92-3)
Pin Count & Lead PitchN / e
3 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol3 auto-grouped pins
OK
IPC-7351B Land Pattern3 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MCP130 / MCP120 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (TO-92-3)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.60 × 3.60 mm
Height (A) & Pitch (e)IPC-7351B
A=4.60mm · e=1.27mm
Pad Size (W × L)Level B
0.95 × 1.55 mm
Pins / Total PadsTopology
3P / 3Pad (THT_TO92)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TO-92-3
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP130-485HI/TO (TO-92-3)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP130-485HI/TO (TO-92-3)?

Manufactured by MICROCHIP, the MCP130-485HI/TO is housed in a TO-92-3 package with 3 pins and a 1.27 mm lead pitch. Key pins include: 1 (VDD: Power Supply Input (VDD — 3.3V / 5.0V Standard Logic)), 2 (RST#: Multiplexed I/O & Peripheral Pin RST# (General)), 3 (VSS: Ground Reference Pin (VSS)).

What are the IPC-7351B PCB Footprint dimensions for MCP130-485HI/TO?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP130-485HI/TO (TO-92-3) has a nominal body envelope of 3.60 × 4.60 mm, pitch e = 1.27 mm, and 3 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP130-485HI/TO?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP130-485HI/TO (MICROCHIP, TO-92-3) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (3 pins) & MCP130 / MCP120 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VDDPower_InPrimary positive power supply input (VDD) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
2RST#Digital_IOSignal terminal RST# (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RST#. Supported peripheral buses: General.
3VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.