PIC18LF47J53T-I/PT (TQFP-44(10x10)) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC18LF47J53T-I/PT

MICROCHIPTQFP-44(10x10) · 44 Pins · Pitch 0.80mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC18LF47J53T-I/PT (TQFP-44(10x10))1IO12RD4/PMD4/RP23RD5/PMD5/RP24RD6/PMD6/RP25RD7/PMD7/RP26VSS17VDD18IO09IO410IO511IO612NC13NC14IO1615IO1716RB6/CCP6/KBI17RB7/CCP7/KBI18MCLR19IO2020IO921IO1022RA3/AN3/C1IN44IO4443RC5/D+/VP42RC4/D-/VM41RD3/PMD3/RP240RD2/PMD2/RP139RD1/PMD1/SDA38RD0/PMD0/SCL37VUSB36IO3635IO3534NC33NC32RC0/T1OSO/T131RA6/CLKO/OSC30RA7/CLKI/OSC29VSS228VDD227RE2/AN7/PMCS26RE1/AN6/PMWR25RE0/AN5/PMRD24IO1323VDDCORE/VCAPGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.833.027.922.917.812.77.62.5-2.5-7.6-12.7-17.8-22.9-27.9-33.0mm
2. 2D FOOTPRINT
1234567891011121314151617181920212223242526272829303132333435363738394041424344E=10.00mm · Pitch e=0.80mmD=10.00mm-10-8-6-4-202468101086420-2-4-6-8-10mm
3. 3D CAD MODEL
Package Body: 10.00mm × 10.00mm · Pitch: 0.80mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (44/44)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1IO1I/OGeneral Purpose Digital I/O Pin IO1
2RD4/PMD4/RP21I/OMultiplexed I/O & Peripheral Pin RD4/PMD4/RP21 (General)
3RD5/PMD5/RP22I/OMultiplexed I/O & Peripheral Pin RD5/PMD5/RP22 (General)
4RD6/PMD6/RP23I/OMultiplexed I/O & Peripheral Pin RD6/PMD6/RP23 (General)
5RD7/PMD7/RP24I/OMultiplexed I/O & Peripheral Pin RD7/PMD7/RP24 (General)
6VSS1GNDGround Reference Pin (VSS1)
7VDD1PowerPower Supply Input (VDD1 — 2.0V to 3.6V)
8IO0I/OGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9IO4I/OGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10IO5I/OGPIO5 / RTC_GPIO5 / TOUCH5 / ADC1_CH4
11IO6I/OGPIO6 / RTC_GPIO6 / TOUCH6 / ADC1_CH5
12NCI/OMultiplexed I/O & Peripheral Pin NC (General)
13NCI/OMultiplexed I/O & Peripheral Pin NC (General)
14IO16I/OGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15IO17I/OGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16RB6/CCP6/KBI2/PGC/RP9I/OMultiplexed I/O & Peripheral Pin RB6/CCP6/KBI2/PGC/RP9 (General)
17RB7/CCP7/KBI3/PGD/RP10I/OMultiplexed I/O & Peripheral Pin RB7/CCP7/KBI3/PGD/RP10 (General)
18MCLRI/OMultiplexed I/O & Peripheral Pin MCLR (General)
19IO20I/OGPIO20 / RTC_GPIO20 / USB_D+ / U1CTS / ADC2_CH9
20IO9I/OGPIO9 / RTC_GPIO9 / TOUCH9 / ADC1_CH8 / FSPIHD
21IO10I/OGPIO10 / RTC_GPIO10 / TOUCH10 / ADC1_CH9 / FSPICS0
22RA3/AN3/C1INB/VREF+AnalogMultiplexed I/O & Peripheral Pin RA3/AN3/C1INB/VREF+ (General)
23VDDCORE/VCAPPowerPower Supply Input (VDDCORE/VCAP — 2.0V to 3.6V)
24IO13I/OGPIO13 / RTC_GPIO13 / TOUCH13 / ADC2_CH2 / FSPIQ
25RE0/AN5/PMRDI/OMultiplexed I/O & Peripheral Pin RE0/AN5/PMRD (General)
26RE1/AN6/PMWRI/OMultiplexed I/O & Peripheral Pin RE1/AN6/PMWR (General)
27RE2/AN7/PMCSI/OMultiplexed I/O & Peripheral Pin RE2/AN7/PMCS (General)
28VDD2PowerPower Supply Input (VDD2 — 2.0V to 3.6V)
29VSS2GNDGround Reference Pin (VSS2)
30RA7/CLKI/OSC1I/OMultiplexed I/O & Peripheral Pin RA7/CLKI/OSC1 (RTC/CLK)
31RA6/CLKO/OSC2I/OMultiplexed I/O & Peripheral Pin RA6/CLKO/OSC2 (RTC/CLK)
32RC0/T1OSO/T1CKI/RP11I/OMultiplexed I/O & Peripheral Pin RC0/T1OSO/T1CKI/RP11 (General)
33NCI/OMultiplexed I/O & Peripheral Pin NC (General)
34NCI/OMultiplexed I/O & Peripheral Pin NC (General)
35IO35I/OGeneral Purpose Digital I/O Pin IO35
36IO36I/OGeneral Purpose Digital I/O Pin IO36
37VUSBI/OMultiplexed I/O & Peripheral Pin VUSB (General)
38RD0/PMD0/SCL2I/OMultiplexed I/O & Peripheral Pin RD0/PMD0/SCL2 (I2C)
39RD1/PMD1/SDA2I/OMultiplexed I/O & Peripheral Pin RD1/PMD1/SDA2 (I2C)
40RD2/PMD2/RP19I/OMultiplexed I/O & Peripheral Pin RD2/PMD2/RP19 (General)
41RD3/PMD3/RP20I/OMultiplexed I/O & Peripheral Pin RD3/PMD3/RP20 (General)
42RC4/D-/VMI/OMultiplexed I/O & Peripheral Pin RC4/D-/VM (USB)
43RC5/D+/VPI/OMultiplexed I/O & Peripheral Pin RC5/D+/VP (USB)
44IO44I/OGeneral Purpose Digital I/O Pin IO44
PIN 1 IO1
I/O
General Purpose Digital I/O Pin IO1
Design note: 3.3V logic domain (3.6V absolute max), 40mA max drive current.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 16 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC18LF47J53T-I/PT (TQFP-44(10x10)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC18LF47J53T-I/PT (TQFP-44(10x10)) - 2. Standard Pinout (Top View)
True package pinout (44 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC18LF47J53T-I/PT (TQFP-44(10x10)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC18LF47J53T-I/PT (TQFP-44(10x10)) - 4. Package Dimensions (D×E×A)
TQFP-44(10x10) · 10.00×10.00mm · Pitch 0.80mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC18LF47J53T-I/PT (TQFP-44(10x10)) - 5. Recommended Land Pattern
IPC-7351B Footprint (44 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC18LF47J53T-I/PT (TQFP-44(10x10)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (16 figures · Page 1/2)
Showing 1–12 of 16 uncropped original figures for PIC18LF47J53 / PIC18LF26J53
P1 · p01_fig01EXACT PACKAGE
PIC18LF47J53T-I/PT (TQFP-44(10x10)) — 28/44-Pin, High-Performance USB MCUs with XLP Technology
28/44-Pin, High-Performance USB MCUs with XLP Technology
P19 · p19_fig01P19
PIC18LF47J53T-I/PT (TQFP-44(10x10)) — Datasheet Page 19 (p19_fig01)
Datasheet Page 19 (p19_fig01)
P28 · p28_fig01867×940px
PIC18LF47J53T-I/PT (TQFP-44(10x10)) — FIGURE 2-2: EXAMPLE OF MCLR PIN CONNECTIONS
FIGURE 2-2: EXAMPLE OF MCLR PIN CONNECTIONS
P208 · p208_fig01867×768px
PIC18LF47J53T-I/PT (TQFP-44(10x10)) — FIGURE 13-3: OSCILLATOR CIRCUIT WITH GROUNDED GUARD RING
FIGURE 13-3: OSCILLATOR CIRCUIT WITH GROUNDED GUARD RING
P254 · p254_fig011401×885px
PIC18LF47J53T-I/PT (TQFP-44(10x10)) — FIGURE 18-1: CAPTURE MODE OPERATION BLOCK DIAGRAM
FIGURE 18-1: CAPTURE MODE OPERATION BLOCK DIAGRAM
P288 · p288_fig011777×994px
PIC18LF47J53T-I/PT (TQFP-44(10x10)) — FIGURE 20-2: SPI MASTER/SLAVE CONNECTION
FIGURE 20-2: SPI MASTER/SLAVE CONNECTION
P424 · p424_fig01978×670px
PIC18LF47J53T-I/PT (TQFP-44(10x10)) — FIGURE 27-3: TYPICAL CONNECTIONS AND INTERNAL CONFIGURATION FOR TIME MEASUREMENT
FIGURE 27-3: TYPICAL CONNECTIONS AND INTERNAL CONFIGURATION FOR TIME MEASUREMENT
P425 · p425_fig011029×666px
PIC18LF47J53T-I/PT (TQFP-44(10x10)) — FIGURE 27-4: TYPICAL CONNECTIONS AND INTERNAL CONFIGURATION FOR PULSE DELAY GENERATION
FIGURE 27-4: TYPICAL CONNECTIONS AND INTERNAL CONFIGURATION FOR PULSE DELAY GENERATION
P425 · p425_fig01P425
PIC18LF47J53T-I/PT (TQFP-44(10x10)) — Datasheet Page 425 (p425_fig01)
Datasheet Page 425 (p425_fig01)
P557 · p557_fig011778×2464px
PIC18LF47J53T-I/PT (TQFP-44(10x10)) —  2009-2016 Microchip Technology Inc. DS30009964C-page 557 | Microchip Technology Drawing C04-076C Sheet 2 of 2 | For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/pa
 2009-2016 Microchip Technology Inc. DS30009964C-page 557 | Microchip Technology Drawing C04-076C Sheet 2 of 2 | For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/pa
P558 · p558_fig011778×2500px
PIC18LF47J53T-I/PT (TQFP-44(10x10)) — DS30009964C-page 558  2009-2016 Microchip Technology Inc. | RECOMMENDED LAND PATTERN | 44-Lead Plastic Thin Quad Flatpack (PT) - 10X10X1 mm Body, 2.00 mm Footprint [TQFP] | SILK SCREEN | 1 2 | 44 | C1 | E | G | Y1 | X1 | C2 | Contact Pad W
DS30009964C-page 558  2009-2016 Microchip Technology Inc. | RECOMMENDED LAND PATTERN | 44-Lead Plastic Thin Quad Flatpack (PT) - 10X10X1 mm Body, 2.00 mm Footprint [TQFP] | SILK SCREEN | 1 2 | 44 | C1 | E | G | Y1 | X1 | C2 | Contact Pad W
P558 · p558_fig01P558
PIC18LF47J53T-I/PT (TQFP-44(10x10)) — Datasheet Page 558 (p558_fig01)
Datasheet Page 558 (p558_fig01)
Page 1 / 2 (16 extracted figures)

Technical Specifications & Part Details (PIC18LF47J53T-I/PT)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC18LF47J53T-I/PT (TQFP-44(10x10)) is a 44-pin standard electronic & interconnect component featuring a 10.00 × 10.00 × 1.00 mm mechanical envelope (lead pitch e = 0.80 mm). Rated for 2.0V to 3.6V supply operation across -10°C to +70°C with integrated USB, UART, SPI, I2C, ADC, PWM, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
2.0V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-10°C to +70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
32 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
10.00 × 10.00 × 1.00 mm (A1=0.10 mm)
Package family: TQFP (TQFP-44(10x10))
Pin Count & Lead PitchN / e
44 Pins | Pitch e = 0.80 mm (31.5 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB, UART, SPI, I2C, ADC, PWM, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol44 auto-grouped pins
OK
IPC-7351B Land Pattern44 pads · Pitch 0.80mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — PIC18LF47J53 / PIC18LF26J53 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (TQFP-44(10x10))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
10.00 × 10.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=0.80mm
Pad Size (W × L)Level B
0.55 × 1.50 mm
Pins / Total PadsTopology
44P / 44Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TQFP-44(10x10)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC18LF47J53T-I/PT (TQFP-44(10x10))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC18LF47J53T-I/PT (TQFP-44(10x10))?

Manufactured by MICROCHIP, the PIC18LF47J53T-I/PT is housed in a TQFP-44(10x10) package with 44 pins and a 0.80 mm lead pitch, supporting a VCC supply range of 2.0V to 3.6V. Key pins include: 1 (IO1: General Purpose Digital I/O Pin IO1), 2 (RD4/PMD4/RP21: Multiplexed I/O & Peripheral Pin RD4/PMD4/RP21 (General)), 3 (RD5/PMD5/RP22: Multiplexed I/O & Peripheral Pin RD5/PMD5/RP22 (General)), 4 (RD6/PMD6/RP23: Multiplexed I/O & Peripheral Pin RD6/PMD6/RP23 (General)), 5 (RD7/PMD7/RP24: Multiplexed I/O & Peripheral Pin RD7/PMD7/RP24 (General)), 6 (VSS1: Ground Reference Pin (VSS1)).

What are the IPC-7351B PCB Footprint dimensions for PIC18LF47J53T-I/PT?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC18LF47J53T-I/PT (TQFP-44(10x10)) has a nominal body envelope of 10.00 × 10.00 mm, pitch e = 0.80 mm, and 44 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC18LF47J53T-I/PT?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC18LF47J53T-I/PT (MICROCHIP, TQFP-44(10x10)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (44 pins) & PIC18LF47J53 / PIC18LF26J53 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1IO1Digital_IOGeneral Purpose Digital I/O Pin IO1
2RD4/PMD4/RP21Digital_IOSignal terminal RD4/PMD4/RP21 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD4/PMD4/RP21. Supported peripheral buses: General.
3RD5/PMD5/RP22Digital_IOSignal terminal RD5/PMD5/RP22 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD5/PMD5/RP22. Supported peripheral buses: General.
4RD6/PMD6/RP23Digital_IOSignal terminal RD6/PMD6/RP23 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD6/PMD6/RP23. Supported peripheral buses: General.
5RD7/PMD7/RP24Digital_IOSignal terminal RD7/PMD7/RP24 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD7/PMD7/RP24. Supported peripheral buses: General.
6VSS1GND0V electrical ground return terminal (VSS1) for internal core logic, I/O drivers, and analog sub-blocks.
7VDD1Power_InPrimary positive power supply input (VDD1) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
8IO0Digital_IOGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9IO4Digital_IOGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10IO5Digital_IOGPIO5 / RTC_GPIO5 / TOUCH5 / ADC1_CH4
11IO6Digital_IOGPIO6 / RTC_GPIO6 / TOUCH6 / ADC1_CH5
12NCNCSignal terminal NC (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
13NCNCSignal terminal NC (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
14IO16Digital_IOGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15IO17Digital_IOGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16RB6/CCP6/KBI2/PGC/RP9Digital_IOSignal terminal RB6/CCP6/KBI2/PGC/RP9 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB6/CCP6/KBI2/PGC/RP9. Supported peripheral buses: General.
17RB7/CCP7/KBI3/PGD/RP10Digital_IOSignal terminal RB7/CCP7/KBI3/PGD/RP10 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB7/CCP7/KBI3/PGD/RP10. Supported peripheral buses: General.
18MCLRDigital_IOSignal terminal MCLR (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: MCLR. Supported peripheral buses: General.
19IO20Digital_IOGPIO20 / RTC_GPIO20 / USB_D+ / U1CTS / ADC2_CH9
20IO9Digital_IOGPIO9 / RTC_GPIO9 / TOUCH9 / ADC1_CH8 / FSPIHD
21IO10Digital_IOGPIO10 / RTC_GPIO10 / TOUCH10 / ADC1_CH9 / FSPICS0
22RA3/AN3/C1INB/VREF+AnalogSignal terminal RA3/AN3/C1INB/VREF+ (Analog, 2.0V to 3.6V domain). Multiplexed alternate functions: RA3/AN3/C1INB/VREF+. Supported peripheral buses: General.
23VDDCORE/VCAPPower_InPrimary positive power supply input (VDDCORE/VCAP) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
24IO13Digital_IOGPIO13 / RTC_GPIO13 / TOUCH13 / ADC2_CH2 / FSPIQ
25RE0/AN5/PMRDDigital_IOSignal terminal RE0/AN5/PMRD (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RE0/AN5/PMRD. Supported peripheral buses: General.
26RE1/AN6/PMWRDigital_IOSignal terminal RE1/AN6/PMWR (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RE1/AN6/PMWR. Supported peripheral buses: General.
27RE2/AN7/PMCSDigital_IOSignal terminal RE2/AN7/PMCS (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RE2/AN7/PMCS. Supported peripheral buses: General.
28VDD2Power_InPrimary positive power supply input (VDD2) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
29VSS2GND0V electrical ground return terminal (VSS2) for internal core logic, I/O drivers, and analog sub-blocks.
30RA7/CLKI/OSC1Digital_IOSignal terminal RA7/CLKI/OSC1 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RA7/CLKI/OSC1. Supported peripheral buses: RTC/CLK.
31RA6/CLKO/OSC2Digital_IOSignal terminal RA6/CLKO/OSC2 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RA6/CLKO/OSC2. Supported peripheral buses: RTC/CLK.
32RC0/T1OSO/T1CKI/RP11Digital_IOSignal terminal RC0/T1OSO/T1CKI/RP11 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC0/T1OSO/T1CKI/RP11. Supported peripheral buses: General.
33NCNCSignal terminal NC (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
34NCNCSignal terminal NC (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
35IO35Digital_IOGeneral Purpose Digital I/O Pin IO35
36IO36Digital_IOGeneral Purpose Digital I/O Pin IO36
37VUSBDigital_IOSignal terminal VUSB (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: VUSB. Supported peripheral buses: General.
38RD0/PMD0/SCL2Digital_IOSignal terminal RD0/PMD0/SCL2 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD0/PMD0/SCL2. Supported peripheral buses: I2C.
39RD1/PMD1/SDA2Digital_IOSignal terminal RD1/PMD1/SDA2 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD1/PMD1/SDA2. Supported peripheral buses: I2C.
40RD2/PMD2/RP19Digital_IOSignal terminal RD2/PMD2/RP19 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD2/PMD2/RP19. Supported peripheral buses: General.
41RD3/PMD3/RP20Digital_IOSignal terminal RD3/PMD3/RP20 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD3/PMD3/RP20. Supported peripheral buses: General.
42RC4/D-/VMDigital_IOSignal terminal RC4/D-/VM (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC4/D-/VM. Supported peripheral buses: USB.
43RC5/D+/VPDigital_IOSignal terminal RC5/D+/VP (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC5/D+/VP. Supported peripheral buses: USB.
44IO44Digital_IOGeneral Purpose Digital I/O Pin IO44