PIC18LF46J11T-I/PT (TQFP-44(10x10)) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC18LF46J11T-I/PT

MICROCHIPTQFP-44(10x10) · 44 Pins · Pitch 0.80mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC18LF46J11T-I/PT (TQFP-44(10x10))1RC7/PMA4/RX12RD4/PMD4/RP23RD5/PMD5/RP24RD6/PMD6/RP25RD7/PMD7/RP26VSS7VDD8RB0/AN12/INT9RB1/AN10/PMB10IO511IO612NC13NC14RB4/PMA1/KBI15RB5/PMA0/KBI16RB6/KBI2/PGC17RB7/KBI3/PGD18MCLR19IO2020RA1/AN1/C2IN21IO1022RA3/AN3/VREF44RC6/PMA5/TX143RC5/SDO1/RP142RC4/SDI1/SDA41RD3/PMD3/RP240RD2/PMD2/RP139RD1/PMD1/SDA38RD0/PMD0/SCL37RC3/SCK1/SCL36RC2/AN11/CTP35RC1/T1OSI/RP34NC33NC32RC0/T1OSO/T131OSC2/CLKO/RA30OSC1/CLKI/RA29VSS28VDD27RE2/AN7/PMCS26RE1/AN6/PMWR25RE0/AN5/PMRD24RA5/AN4/SS1/23VDDCORE/VCAPGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.833.027.922.917.812.77.62.5-2.5-7.6-12.7-17.8-22.9-27.9-33.0mm
2. 2D FOOTPRINT
1234567891011121314151617181920212223242526272829303132333435363738394041424344E=10.00mm · Pitch e=0.80mmD=10.00mm-10-8-6-4-202468101086420-2-4-6-8-10mm
3. 3D CAD MODEL
Package Body: 10.00mm × 10.00mm · Pitch: 0.80mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (44/44)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1RC7/PMA4/RX1/DT1/RP18I/OMultiplexed I/O & Peripheral Pin RC7/PMA4/RX1/DT1/RP18 (General)
2RD4/PMD4/RP21I/OMultiplexed I/O & Peripheral Pin RD4/PMD4/RP21 (General)
3RD5/PMD5/RP22I/OMultiplexed I/O & Peripheral Pin RD5/PMD5/RP22 (General)
4RD6/PMD6/RP23I/OMultiplexed I/O & Peripheral Pin RD6/PMD6/RP23 (General)
5RD7/PMD7/RP24I/OMultiplexed I/O & Peripheral Pin RD7/PMD7/RP24 (General)
6VSSGNDGround Reference Pin (VSS)
7VDDPowerPower Supply Input (VDD — 2.0V to 3.6V)
8RB0/AN12/INT0/RP3I/OMultiplexed I/O & Peripheral Pin RB0/AN12/INT0/RP3 (General)
9RB1/AN10/PMBE/RTCC/RP4I/OMultiplexed I/O & Peripheral Pin RB1/AN10/PMBE/RTCC/RP4 (RTC/CLK)
10IO5I/OGPIO5 / RTC_GPIO5 / TOUCH5 / ADC1_CH4
11IO6I/OGPIO6 / RTC_GPIO6 / TOUCH6 / ADC1_CH5
12NCI/OMultiplexed I/O & Peripheral Pin NC (General)
13NCI/OMultiplexed I/O & Peripheral Pin NC (General)
14RB4/PMA1/KBI0/RP7I/OMultiplexed I/O & Peripheral Pin RB4/PMA1/KBI0/RP7 (General)
15RB5/PMA0/KBI1/RP8I/OMultiplexed I/O & Peripheral Pin RB5/PMA0/KBI1/RP8 (General)
16RB6/KBI2/PGC/RP9I/OMultiplexed I/O & Peripheral Pin RB6/KBI2/PGC/RP9 (General)
17RB7/KBI3/PGD/RP10I/OMultiplexed I/O & Peripheral Pin RB7/KBI3/PGD/RP10 (General)
18MCLRI/OMultiplexed I/O & Peripheral Pin MCLR (General)
19IO20I/OGPIO20 / RTC_GPIO20 / USB_D+ / U1CTS / ADC2_CH9
20RA1/AN1/C2INA/PMA7/RP1I/OMultiplexed I/O & Peripheral Pin RA1/AN1/C2INA/PMA7/RP1 (General)
21IO10I/OGPIO10 / RTC_GPIO10 / TOUCH10 / ADC1_CH9 / FSPICS0
22RA3/AN3/VREF+/C1INBAnalogMultiplexed I/O & Peripheral Pin RA3/AN3/VREF+/C1INB (General)
23VDDCORE/VCAPPowerPower Supply Input (VDDCORE/VCAP — 2.0V to 3.6V)
24RA5/AN4/SS1/HLVDIN/RP2I/OMultiplexed I/O & Peripheral Pin RA5/AN4/SS1/HLVDIN/RP2 (General)
25RE0/AN5/PMRDI/OMultiplexed I/O & Peripheral Pin RE0/AN5/PMRD (General)
26RE1/AN6/PMWRI/OMultiplexed I/O & Peripheral Pin RE1/AN6/PMWR (General)
27RE2/AN7/PMCSI/OMultiplexed I/O & Peripheral Pin RE2/AN7/PMCS (General)
28VDDPowerPower Supply Input (VDD — 2.0V to 3.6V)
29VSSGNDGround Reference Pin (VSS)
30OSC1/CLKI/RA7I/OMultiplexed I/O & Peripheral Pin OSC1/CLKI/RA7 (RTC/CLK)
31OSC2/CLKO/RA6I/OMultiplexed I/O & Peripheral Pin OSC2/CLKO/RA6 (RTC/CLK)
32RC0/T1OSO/T1CKI/RP11I/OMultiplexed I/O & Peripheral Pin RC0/T1OSO/T1CKI/RP11 (General)
33NCI/OMultiplexed I/O & Peripheral Pin NC (General)
34NCI/OMultiplexed I/O & Peripheral Pin NC (General)
35RC1/T1OSI/RP12I/OMultiplexed I/O & Peripheral Pin RC1/T1OSI/RP12 (General)
36RC2/AN11/CTPLS/RP13I/OMultiplexed I/O & Peripheral Pin RC2/AN11/CTPLS/RP13 (General)
37RC3/SCK1/SCL1/RP14I/OMultiplexed I/O & Peripheral Pin RC3/SCK1/SCL1/RP14 (SPI, I2C)
38RD0/PMD0/SCL2I/OMultiplexed I/O & Peripheral Pin RD0/PMD0/SCL2 (I2C)
39RD1/PMD1/SDA2I/OMultiplexed I/O & Peripheral Pin RD1/PMD1/SDA2 (I2C)
40RD2/PMD2/RP19I/OMultiplexed I/O & Peripheral Pin RD2/PMD2/RP19 (General)
41RD3/PMD3/RP20I/OMultiplexed I/O & Peripheral Pin RD3/PMD3/RP20 (General)
42RC4/SDI1/SDA1/RP15I/OMultiplexed I/O & Peripheral Pin RC4/SDI1/SDA1/RP15 (I2C)
43RC5/SDO1/RP16I/OMultiplexed I/O & Peripheral Pin RC5/SDO1/RP16 (General)
44RC6/PMA5/TX1/CK1/RP17I/OMultiplexed I/O & Peripheral Pin RC6/PMA5/TX1/CK1/RP17 (General)
PIN 1 RC7/PMA4/RX1/DT1/RP18
I/O
Multiplexed I/O & Peripheral Pin RC7/PMA4/RX1/DT1/RP18 (General)
Design note: Signal terminal RC7/PMA4/RX1/DT1/RP18 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC7/PMA4/RX1/DT1/RP18. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 17 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC18LF46J11T-I/PT (TQFP-44(10x10)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC18LF46J11T-I/PT (TQFP-44(10x10)) - 2. Standard Pinout (Top View)
True package pinout (44 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC18LF46J11T-I/PT (TQFP-44(10x10)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC18LF46J11T-I/PT (TQFP-44(10x10)) - 4. Package Dimensions (D×E×A)
TQFP-44(10x10) · 10.00×10.00mm · Pitch 0.80mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC18LF46J11T-I/PT (TQFP-44(10x10)) - 5. Recommended Land Pattern
IPC-7351B Footprint (44 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC18LF46J11T-I/PT (TQFP-44(10x10)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (17 figures · Page 1/2)
Showing 1–12 of 17 uncropped original figures for PIC18LF46J11
P1 · p01_fig01752×399px
PIC18LF46J11T-I/PT (TQFP-44(10x10)) — PIC18F46J11 Family Data Sheet
PIC18F46J11 Family Data Sheet
P1 · p01_fig01P1
PIC18LF46J11T-I/PT (TQFP-44(10x10)) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P2 · p02_fig011777×1640px
PIC18LF46J11T-I/PT (TQFP-44(10x10)) — DS39932D-page 2  2011 Microchip Technology Inc. | Trademarks | FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Inc
DS39932D-page 2  2011 Microchip Technology Inc. | Trademarks | FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Inc
P2 · p02_fig02788×285px
PIC18LF46J11T-I/PT (TQFP-44(10x10)) — ISBN: 978-1-60932-959-4
ISBN: 978-1-60932-959-4
P32 · p32_fig01867×940px
PIC18LF46J11T-I/PT (TQFP-44(10x10)) — FIGURE 2-2: EXAMPLE OF MCLR PIN CONNECTIONS
FIGURE 2-2: EXAMPLE OF MCLR PIN CONNECTIONS
P207 · p207_fig01867×768px
PIC18LF46J11T-I/PT (TQFP-44(10x10)) — FIGURE 13-3: OSCILLATOR CIRCUIT WITH GROUNDED GUARD RING
FIGURE 13-3: OSCILLATOR CIRCUIT WITH GROUNDED GUARD RING
P207 · p207_fig01P207
PIC18LF46J11T-I/PT (TQFP-44(10x10)) — Datasheet Page 207 (p207_fig01)
Datasheet Page 207 (p207_fig01)
P251 · p251_fig011537×597px
PIC18LF46J11T-I/PT (TQFP-44(10x10)) — FIGURE 18-2: COMPARE MODE OPERATION BLOCK DIAGRAM
FIGURE 18-2: COMPARE MODE OPERATION BLOCK DIAGRAM
P256 · p256_fig011536×1000px
PIC18LF46J11T-I/PT (TQFP-44(10x10)) — FIGURE 18-6: EXAMPLE PWM (ENHANCED MODE) OUTPUT RELATIONSHIPS (ACTIVE-HIGH STATE)
FIGURE 18-6: EXAMPLE PWM (ENHANCED MODE) OUTPUT RELATIONSHIPS (ACTIVE-HIGH STATE)
P256 · p256_fig01P256
PIC18LF46J11T-I/PT (TQFP-44(10x10)) — Datasheet Page 256 (p256_fig01)
Datasheet Page 256 (p256_fig01)
P276 · p276_fig011777×969px
PIC18LF46J11T-I/PT (TQFP-44(10x10)) — FIGURE 19-2: SPI MASTER/SLAVE CONNECTION
FIGURE 19-2: SPI MASTER/SLAVE CONNECTION
P389 · p389_fig01978×669px
PIC18LF46J11T-I/PT (TQFP-44(10x10)) — FIGURE 25-3: TYPICAL CONNECTIONS AND INTERNAL CONFIGURATION FOR TIME MEASUREMENT
FIGURE 25-3: TYPICAL CONNECTIONS AND INTERNAL CONFIGURATION FOR TIME MEASUREMENT
Page 1 / 2 (17 extracted figures)

Technical Specifications & Part Details (PIC18LF46J11T-I/PT)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC18LF46J11T-I/PT (TQFP-44(10x10)) is a 44-pin standard electronic & interconnect component featuring a 10.00 × 10.00 × 1.20 mm mechanical envelope (lead pitch e = 0.80 mm). Rated for 2.0V to 3.6V supply operation across -10°C to +70°C with integrated UART, SPI, I2C, ADC, PWM, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
2.0V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-10°C to +70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
32 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
10.00 × 10.00 × 1.20 mm (A1=0.10 mm)
Package family: TQFP (TQFP-44(10x10))
Pin Count & Lead PitchN / e
44 Pins | Pitch e = 0.80 mm (31.5 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, ADC, PWM, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol44 auto-grouped pins
OK
IPC-7351B Land Pattern44 pads · Pitch 0.80mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TQFP-44(10x10))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
10.00 × 10.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.20mm · e=0.80mm
Pad Size (W × L)Level B
0.50 × 1.50 mm
Pins / Total PadsTopology
44P / 44Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TQFP-44(10x10)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC18LF46J11T-I/PT (TQFP-44(10x10))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC18LF46J11T-I/PT (TQFP-44(10x10))?

Manufactured by MICROCHIP, the PIC18LF46J11T-I/PT is housed in a TQFP-44(10x10) package with 44 pins and a 0.80 mm lead pitch, supporting a VCC supply range of 2.0V to 3.6V. Key pins include: 1 (RC7/PMA4/RX1/DT1/RP18: Multiplexed I/O & Peripheral Pin RC7/PMA4/RX1/DT1/RP18 (General)), 2 (RD4/PMD4/RP21: Multiplexed I/O & Peripheral Pin RD4/PMD4/RP21 (General)), 3 (RD5/PMD5/RP22: Multiplexed I/O & Peripheral Pin RD5/PMD5/RP22 (General)), 4 (RD6/PMD6/RP23: Multiplexed I/O & Peripheral Pin RD6/PMD6/RP23 (General)), 5 (RD7/PMD7/RP24: Multiplexed I/O & Peripheral Pin RD7/PMD7/RP24 (General)), 6 (VSS: Ground Reference Pin (VSS)).

What are the IPC-7351B PCB Footprint dimensions for PIC18LF46J11T-I/PT?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC18LF46J11T-I/PT (TQFP-44(10x10)) has a nominal body envelope of 10.00 × 10.00 mm, pitch e = 0.80 mm, and 44 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC18LF46J11T-I/PT?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC18LF46J11T-I/PT (MICROCHIP, TQFP-44(10x10)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (44 pins) & PIC18LF46J11 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1RC7/PMA4/RX1/DT1/RP18Digital_IOSignal terminal RC7/PMA4/RX1/DT1/RP18 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC7/PMA4/RX1/DT1/RP18. Supported peripheral buses: General.
2RD4/PMD4/RP21Digital_IOSignal terminal RD4/PMD4/RP21 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD4/PMD4/RP21. Supported peripheral buses: General.
3RD5/PMD5/RP22Digital_IOSignal terminal RD5/PMD5/RP22 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD5/PMD5/RP22. Supported peripheral buses: General.
4RD6/PMD6/RP23Digital_IOSignal terminal RD6/PMD6/RP23 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD6/PMD6/RP23. Supported peripheral buses: General.
5RD7/PMD7/RP24Digital_IOSignal terminal RD7/PMD7/RP24 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD7/PMD7/RP24. Supported peripheral buses: General.
6VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
7VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
8RB0/AN12/INT0/RP3Digital_IOSignal terminal RB0/AN12/INT0/RP3 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB0/AN12/INT0/RP3. Supported peripheral buses: General.
9RB1/AN10/PMBE/RTCC/RP4Digital_IOSignal terminal RB1/AN10/PMBE/RTCC/RP4 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB1/AN10/PMBE/RTCC/RP4. Supported peripheral buses: RTC/CLK.
10IO5Digital_IOGPIO5 / RTC_GPIO5 / TOUCH5 / ADC1_CH4
11IO6Digital_IOGPIO6 / RTC_GPIO6 / TOUCH6 / ADC1_CH5
12NCNCSignal terminal NC (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
13NCNCSignal terminal NC (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
14RB4/PMA1/KBI0/RP7Digital_IOSignal terminal RB4/PMA1/KBI0/RP7 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB4/PMA1/KBI0/RP7. Supported peripheral buses: General.
15RB5/PMA0/KBI1/RP8Digital_IOSignal terminal RB5/PMA0/KBI1/RP8 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB5/PMA0/KBI1/RP8. Supported peripheral buses: General.
16RB6/KBI2/PGC/RP9Digital_IOSignal terminal RB6/KBI2/PGC/RP9 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB6/KBI2/PGC/RP9. Supported peripheral buses: General.
17RB7/KBI3/PGD/RP10Digital_IOSignal terminal RB7/KBI3/PGD/RP10 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB7/KBI3/PGD/RP10. Supported peripheral buses: General.
18MCLRDigital_IOSignal terminal MCLR (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: MCLR. Supported peripheral buses: General.
19IO20Digital_IOGPIO20 / RTC_GPIO20 / USB_D+ / U1CTS / ADC2_CH9
20RA1/AN1/C2INA/PMA7/RP1Digital_IOSignal terminal RA1/AN1/C2INA/PMA7/RP1 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RA1/AN1/C2INA/PMA7/RP1. Supported peripheral buses: General.
21IO10Digital_IOGPIO10 / RTC_GPIO10 / TOUCH10 / ADC1_CH9 / FSPICS0
22RA3/AN3/VREF+/C1INBAnalogSignal terminal RA3/AN3/VREF+/C1INB (Analog, 2.0V to 3.6V domain). Multiplexed alternate functions: RA3/AN3/VREF+/C1INB. Supported peripheral buses: General.
23VDDCORE/VCAPPower_InPrimary positive power supply input (VDDCORE/VCAP) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
24RA5/AN4/SS1/HLVDIN/RP2Digital_IOSignal terminal RA5/AN4/SS1/HLVDIN/RP2 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RA5/AN4/SS1/HLVDIN/RP2. Supported peripheral buses: General.
25RE0/AN5/PMRDDigital_IOSignal terminal RE0/AN5/PMRD (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RE0/AN5/PMRD. Supported peripheral buses: General.
26RE1/AN6/PMWRDigital_IOSignal terminal RE1/AN6/PMWR (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RE1/AN6/PMWR. Supported peripheral buses: General.
27RE2/AN7/PMCSDigital_IOSignal terminal RE2/AN7/PMCS (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RE2/AN7/PMCS. Supported peripheral buses: General.
28VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
29VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
30OSC1/CLKI/RA7Digital_IOSignal terminal OSC1/CLKI/RA7 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: OSC1/CLKI/RA7. Supported peripheral buses: RTC/CLK.
31OSC2/CLKO/RA6Digital_IOSignal terminal OSC2/CLKO/RA6 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: OSC2/CLKO/RA6. Supported peripheral buses: RTC/CLK.
32RC0/T1OSO/T1CKI/RP11Digital_IOSignal terminal RC0/T1OSO/T1CKI/RP11 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC0/T1OSO/T1CKI/RP11. Supported peripheral buses: General.
33NCNCSignal terminal NC (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
34NCNCSignal terminal NC (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
35RC1/T1OSI/RP12Digital_IOSignal terminal RC1/T1OSI/RP12 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC1/T1OSI/RP12. Supported peripheral buses: General.
36RC2/AN11/CTPLS/RP13Digital_IOSignal terminal RC2/AN11/CTPLS/RP13 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC2/AN11/CTPLS/RP13. Supported peripheral buses: General.
37RC3/SCK1/SCL1/RP14Digital_IOSignal terminal RC3/SCK1/SCL1/RP14 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC3/SCK1/SCL1/RP14. Supported peripheral buses: SPI, I2C.
38RD0/PMD0/SCL2Digital_IOSignal terminal RD0/PMD0/SCL2 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD0/PMD0/SCL2. Supported peripheral buses: I2C.
39RD1/PMD1/SDA2Digital_IOSignal terminal RD1/PMD1/SDA2 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD1/PMD1/SDA2. Supported peripheral buses: I2C.
40RD2/PMD2/RP19Digital_IOSignal terminal RD2/PMD2/RP19 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD2/PMD2/RP19. Supported peripheral buses: General.
41RD3/PMD3/RP20Digital_IOSignal terminal RD3/PMD3/RP20 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RD3/PMD3/RP20. Supported peripheral buses: General.
42RC4/SDI1/SDA1/RP15Digital_IOSignal terminal RC4/SDI1/SDA1/RP15 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC4/SDI1/SDA1/RP15. Supported peripheral buses: I2C.
43RC5/SDO1/RP16Digital_IOSignal terminal RC5/SDO1/RP16 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC5/SDO1/RP16. Supported peripheral buses: General.
44RC6/PMA5/TX1/CK1/RP17Digital_IOSignal terminal RC6/PMA5/TX1/CK1/RP17 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC6/PMA5/TX1/CK1/RP17. Supported peripheral buses: General.