PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC32MM0128GPM048T-I/PT

MICROCHIPTQFP-48(7x7) · 48 Pins · Pitch 0.50mmIPC TOLERANCE VARIATION5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC32MM0128GPM048T-I/PT (TQFP-48(7x7))1TMS2RP233RP204RC85USBOEN6VSS7VCAP8RTCC9RB1010RB1111VUSB3V312SCL313SCK314SDI315VBUSON16SS117VSS18VDD19MCLR20U1RX21VREF+22VREF-23RP624RP748U1CTS47SDA346VBUS45USBID44U1TX43VDD42VSS41RC540RC439RC338U1RTS37RP2436SOSCO35SOSCI34SDO333RP432RP331VSS30VDD29RP1928T3G27T2G26TDI25SDA2Grid Pitch = 2.54mm (IEEE-315)-20.3-15.2-10.2-5.105.110.215.220.335.630.525.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4-30.5-35.6mm
2. 2D FOOTPRINT
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748E=7.00mm · Pitch e=0.50mmD=7.00mm-7-5-3-113577531-1-3-5-7mm
3. 3D CAD MODEL
Package Body: 7.00mm × 7.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (48/48)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1TMSI/OMultiplexed I/O & Peripheral Pin TMS (SWD/JTAG)
2RP23I/OMultiplexed I/O & Peripheral Pin RP23 (General)
3RP20I/OMultiplexed I/O & Peripheral Pin RP20 (General)
4RC8I/OMultiplexed I/O & Peripheral Pin RC8 (General)
5USBOENI/OMultiplexed I/O & Peripheral Pin USBOEN (USB)
6VSSGNDGround Reference Pin (VSS)
7VCAPI/OMultiplexed I/O & Peripheral Pin VCAP (General)
8RTCCI/OMultiplexed I/O & Peripheral Pin RTCC (RTC/CLK)
9RB10I/OMultiplexed I/O & Peripheral Pin RB10 (General)
10RB11I/OMultiplexed I/O & Peripheral Pin RB11 (General)
11VUSB3V3PowerPower Supply Input (VUSB3V3 — 2.0V to 3.6V)
12SCL3I/OMultiplexed I/O & Peripheral Pin SCL3 (I2C)
13SCK3I/OMultiplexed I/O & Peripheral Pin SCK3 (SPI)
14SDI3I/OMultiplexed I/O & Peripheral Pin SDI3 (SPI)
15VBUSONPowerRegulated Power Output (VBUSON — 2.0V to 3.6V)
16SS1I/OMultiplexed I/O & Peripheral Pin SS1 (SPI)
17VSSGNDGround Reference Pin (VSS)
18VDDPowerPower Supply Input (VDD — 2.0V to 3.6V)
19MCLRI/OMultiplexed I/O & Peripheral Pin MCLR (General)
20U1RXI/OMultiplexed I/O & Peripheral Pin U1RX (UART)
21VREF+AnalogMultiplexed I/O & Peripheral Pin VREF+ (General)
22VREF-AnalogMultiplexed I/O & Peripheral Pin VREF- (General)
23RP6I/OMultiplexed I/O & Peripheral Pin RP6 (General)
24RP7I/OMultiplexed I/O & Peripheral Pin RP7 (General)
25SDA2I/OMultiplexed I/O & Peripheral Pin SDA2 (I2C)
26TDII/OMultiplexed I/O & Peripheral Pin TDI (SWD/JTAG)
27T2GI/OMultiplexed I/O & Peripheral Pin T2G (General)
28T3GI/OMultiplexed I/O & Peripheral Pin T3G (General)
29RP19I/OMultiplexed I/O & Peripheral Pin RP19 (General)
30VDDPowerPower Supply Input (VDD — 2.0V to 3.6V)
31VSSGNDGround Reference Pin (VSS)
32RP3I/OMultiplexed I/O & Peripheral Pin RP3 (General)
33RP4I/OMultiplexed I/O & Peripheral Pin RP4 (General)
34SDO3I/OMultiplexed I/O & Peripheral Pin SDO3 (SPI)
35SOSCII/OMultiplexed I/O & Peripheral Pin SOSCI (RTC/CLK)
36SOSCOI/OMultiplexed I/O & Peripheral Pin SOSCO (RTC/CLK)
37RP24I/OMultiplexed I/O & Peripheral Pin RP24 (General)
38U1RTSI/OMultiplexed I/O & Peripheral Pin U1RTS (UART)
39RC3I/OMultiplexed I/O & Peripheral Pin RC3 (General)
40RC4I/OMultiplexed I/O & Peripheral Pin RC4 (General)
41RC5I/OMultiplexed I/O & Peripheral Pin RC5 (General)
42VSSGNDGround Reference Pin (VSS)
43VDDPowerPower Supply Input (VDD — 2.0V to 3.6V)
44U1TXI/OMultiplexed I/O & Peripheral Pin U1TX (UART)
45USBIDI/OMultiplexed I/O & Peripheral Pin USBID (USB)
46VBUSPowerPower Supply Input (VBUS — 2.0V to 3.6V)
47SDA3I/OMultiplexed I/O & Peripheral Pin SDA3 (I2C)
48U1CTSI/OMultiplexed I/O & Peripheral Pin U1CTS (UART)
PIN 1 TMS
I/O
Multiplexed I/O & Peripheral Pin TMS (SWD/JTAG)
Design note: JTAG mode select input
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 19 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) - 2. Standard Pinout (Top View)
True package pinout (48 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) - 4. Package Dimensions (D×E×A)
TQFP-48(7x7) · 7.00×7.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) - 5. Recommended Land Pattern
IPC-7351B Footprint (48 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (19 figures · Page 1/2)
Showing 1–12 of 19 uncropped original figures for PIC32MM0128G / PIC32MM0256G
P1 · p01_fig01376×200px
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) — 32-Bit Flash Microcontroller with MIPS32® microAptiv™ UC Core,
32-Bit Flash Microcontroller with MIPS32® microAptiv™ UC Core,
P26 · p26_fig011777×625px
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) — FIGURE 2-4: DC BIAS VOLTAGE vs. CAPACITANCE CHARACTERISTICS 10 -20 -50 -80
FIGURE 2-4: DC BIAS VOLTAGE vs. CAPACITANCE CHARACTERISTICS 10 -20 -50 -80
P27 · p27_fig011778×1072px
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) — FIGURE 2-5: SUGGESTED OSCILLATOR CIRCUIT PLACEMENT
FIGURE 2-5: SUGGESTED OSCILLATOR CIRCUIT PLACEMENT
P333 · p333_fig011778×2733px
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) —  2016-2019 Microchip Technology Inc. DS60001387D-page 335 | PIC32MM0256GPM064 FAMILY | Microchip Technology Drawing C04-442A-M4 Sheet 2 of 2 | REF: Reference Dimension, usually without tolerance, for information purposes only. BSC: Basic D
 2016-2019 Microchip Technology Inc. DS60001387D-page 335 | PIC32MM0256GPM064 FAMILY | Microchip Technology Drawing C04-442A-M4 Sheet 2 of 2 | REF: Reference Dimension, usually without tolerance, for information purposes only. BSC: Basic D
P333 · p333_fig01P333
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) — Datasheet Page 333 (p333_fig01)
Datasheet Page 333 (p333_fig01)
P334 · p334_fig011778×2733px
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) — PIC32MM0256GPM064 FAMILY | DS60001387D-page 336  2016-2019 Microchip Technology Inc. | RECOMMENDED LAND PATTERN | Dimension Limits Units | C2 | Center Pad Width | Contact Pad Spacing | Center Pad Length | Contact Pitch | Y2 X2 | 4.70 4.70
PIC32MM0256GPM064 FAMILY | DS60001387D-page 336  2016-2019 Microchip Technology Inc. | RECOMMENDED LAND PATTERN | Dimension Limits Units | C2 | Center Pad Width | Contact Pad Spacing | Center Pad Length | Contact Pitch | Y2 X2 | 4.70 4.70
P334 · p334_fig01P334
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) — Datasheet Page 334 (p334_fig01)
Datasheet Page 334 (p334_fig01)
P336 · p336_fig011778×2733px
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) — PIC32MM0256GPM064 FAMILY | DS60001387D-page 338  2016-2019 Microchip Technology Inc. | For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging Note: | REF: Refer
PIC32MM0256GPM064 FAMILY | DS60001387D-page 338  2016-2019 Microchip Technology Inc. | For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging Note: | REF: Refer
P336 · p336_fig01P336
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) — Datasheet Page 336 (p336_fig01)
Datasheet Page 336 (p336_fig01)
P337 · p337_fig011778×2733px
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) —  2016-2019 Microchip Technology Inc. DS60001387D-page 339 | PIC32MM0256GPM064 FAMILY | RECOMMENDED LAND PATTERN | Dimension Limits Units | C2 | Center Pad Width | Contact Pad Spacing | Center Pad Length | Contact Pitch | Y2 X2 | 3.50 3.50
 2016-2019 Microchip Technology Inc. DS60001387D-page 339 | PIC32MM0256GPM064 FAMILY | RECOMMENDED LAND PATTERN | Dimension Limits Units | C2 | Center Pad Width | Contact Pad Spacing | Center Pad Length | Contact Pitch | Y2 X2 | 3.50 3.50
P6 · p06_fig011188×1122px
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) — Legend: Shaded pins are up to 5V tolerant. Note 1: High drive strength pin. [SSOP-28-208mil]
Legend: Shaded pins are up to 5V tolerant. Note 1: High drive strength pin. [SSOP-28-208mil]
P319 · p319_fig011777×2571px
PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) — PIC32MM0256GPM064 FAMILY [SSOP-28-208mil]
PIC32MM0256GPM064 FAMILY [SSOP-28-208mil]
Page 1 / 2 (19 extracted figures)

Technical Specifications & Part Details (PIC32MM0128GPM048T-I/PT)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) is a 48-pin standard electronic & interconnect component featuring a 7.00 × 7.00 × 1.20 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2.0V to 3.6V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated USB, UART, SPI, I2C, I2S, ADC, DAC, PWM, JTAG / SWD, IrDA, RTC/CLK, SWD/JTAG interfaces.
Operating Supply VoltageV_CC / V_DD
2.0V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
25 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
7.00 × 7.00 × 1.20 mm (A1=0.10 mm)
Package family: TQFP (TQFP-48(7x7))
Pin Count & Lead PitchN / e
48 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB, UART, SPI, I2C, I2S, ADC, DAC, PWM, JTAG / SWD, IrDA, RTC/CLK, SWD/JTAG
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol48 auto-grouped pins
OK
IPC-7351B Land Pattern48 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — PIC32MM0128G / PIC32MM0256G (4)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (TQFP-48(7x7))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
7.00 × 7.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.20mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 1.25 mm
Pins / Total PadsTopology
48P / 48Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TQFP-48(7x7)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC32MM0128GPM048T-I/PT (TQFP-48(7x7))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC32MM0128GPM048T-I/PT (TQFP-48(7x7))?

Manufactured by MICROCHIP, the PIC32MM0128GPM048T-I/PT is housed in a TQFP-48(7x7) package with 48 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.0V to 3.6V. Key pins include: 1 (TMS: Multiplexed I/O & Peripheral Pin TMS (SWD/JTAG)), 2 (RP23: Multiplexed I/O & Peripheral Pin RP23 (General)), 3 (RP20: Multiplexed I/O & Peripheral Pin RP20 (General)), 4 (RC8: Multiplexed I/O & Peripheral Pin RC8 (General)), 5 (USBOEN: Multiplexed I/O & Peripheral Pin USBOEN (USB)), 6 (VSS: Ground Reference Pin (VSS)).

What are the IPC-7351B PCB Footprint dimensions for PIC32MM0128GPM048T-I/PT?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC32MM0128GPM048T-I/PT (TQFP-48(7x7)) has a nominal body envelope of 7.00 × 7.00 mm, pitch e = 0.50 mm, and 48 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC32MM0128GPM048T-I/PT?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC32MM0128GPM048T-I/PT (MICROCHIP, TQFP-48(7x7)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (48 pins) & PIC32MM0128G / PIC32MM0256G Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1TMSDigital_IOSignal terminal TMS (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: TMS. Supported peripheral buses: SWD/JTAG.
2RP23Digital_IOSignal terminal RP23 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RP23. Supported peripheral buses: General.
3RP20Digital_IOSignal terminal RP20 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RP20. Supported peripheral buses: General.
4RC8Digital_IOSignal terminal RC8 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC8. Supported peripheral buses: General.
5USBOENDigital_IOSignal terminal USBOEN (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: USBOEN. Supported peripheral buses: USB.
6VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
7VCAPDigital_IOSignal terminal VCAP (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: VCAP. Supported peripheral buses: General.
8RTCCDigital_IOSignal terminal RTCC (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RTCC. Supported peripheral buses: RTC/CLK.
9RB10Digital_IOSignal terminal RB10 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB10. Supported peripheral buses: General.
10RB11Digital_IOSignal terminal RB11 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RB11. Supported peripheral buses: General.
11VUSB3V3Power_InPrimary positive power supply input (VUSB3V3) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
12SCL3Digital_IOSignal terminal SCL3 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: SCL3. Supported peripheral buses: I2C.
13SCK3Digital_IOSignal terminal SCK3 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: SPI3. Supported peripheral buses: SPI.
14SDI3Digital_IOSignal terminal SDI3 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: SPI3. Supported peripheral buses: SPI.
15VBUSONPower_OutRegulated power output rail (VBUSON) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
16SS1Digital_IOSignal terminal SS1 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: SPI1. Supported peripheral buses: SPI.
17VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
18VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
19MCLRDigital_IOSignal terminal MCLR (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: MCLR. Supported peripheral buses: General.
20U1RXDigital_IOSignal terminal U1RX (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: U1RX. Supported peripheral buses: UART.
21VREF+AnalogSignal terminal VREF+ (Analog, 2.0V to 3.6V domain). Multiplexed alternate functions: VREF+. Supported peripheral buses: General.
22VREF-AnalogSignal terminal VREF- (Analog, 2.0V to 3.6V domain). Multiplexed alternate functions: VREF-. Supported peripheral buses: General.
23RP6Digital_IOSignal terminal RP6 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RP6. Supported peripheral buses: General.
24RP7Digital_IOSignal terminal RP7 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RP7. Supported peripheral buses: General.
25SDA2Digital_IOSignal terminal SDA2 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: SDA2. Supported peripheral buses: I2C.
26TDIDigital_IOSignal terminal TDI (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: TDI. Supported peripheral buses: SWD/JTAG.
27T2GDigital_IOSignal terminal T2G (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: T2G. Supported peripheral buses: General.
28T3GDigital_IOSignal terminal T3G (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: T3G. Supported peripheral buses: General.
29RP19Digital_IOSignal terminal RP19 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RP19. Supported peripheral buses: General.
30VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
31VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
32RP3Digital_IOSignal terminal RP3 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RP3. Supported peripheral buses: General.
33RP4Digital_IOSignal terminal RP4 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RP4. Supported peripheral buses: General.
34SDO3Digital_IOSignal terminal SDO3 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: SPI3. Supported peripheral buses: SPI.
35SOSCIDigital_IOSignal terminal SOSCI (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: SOSCI. Supported peripheral buses: RTC/CLK.
36SOSCODigital_IOSignal terminal SOSCO (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: SOSCO. Supported peripheral buses: RTC/CLK.
37RP24Digital_IOSignal terminal RP24 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RP24. Supported peripheral buses: General.
38U1RTSDigital_IOSignal terminal U1RTS (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: U1RTS. Supported peripheral buses: UART.
39RC3Digital_IOSignal terminal RC3 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC3. Supported peripheral buses: General.
40RC4Digital_IOSignal terminal RC4 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC4. Supported peripheral buses: General.
41RC5Digital_IOSignal terminal RC5 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: RC5. Supported peripheral buses: General.
42VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
43VDDPower_InPrimary positive power supply input (VDD) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
44U1TXDigital_IOSignal terminal U1TX (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: U1TX. Supported peripheral buses: UART.
45USBIDDigital_IOSignal terminal USBID (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: USBID. Supported peripheral buses: USB.
46VBUSPower_InPrimary positive power supply input (VBUS) operating in the 2.0V to 3.6V domain (Max rating: 3.6V).
47SDA3Digital_IOSignal terminal SDA3 (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: SDA3. Supported peripheral buses: I2C.
48U1CTSDigital_IOSignal terminal U1CTS (I/O, 2.0V to 3.6V domain). Multiplexed alternate functions: U1CTS. Supported peripheral buses: UART.