PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC18F27Q10T-I/ML

MICROCHIPQFN-28-EP(6x6) · 29 Pins · Pitch 0.50mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC18F27Q10T-I/ML (QFN-28-EP(6x6))1IOCEN[n]=12RA3/AN3/VREF3RA4/T0CKI4RA5/AN4/SS#/5VSS6OSC1/CLKI/RA7OSC2/CLKO/RA8RC0/T1OSO/T19RC1/T1OSI10RC2/CCP111RC3/SCK/SCL12RC4/SDI/SDA13RC5/SDO14RC6/TX/CK15RC7/RX/DT29EP28RA1/AN127RA0/AN026MCLR#/VPP/RE25RB7/KBI3/PGD24RB6/KBI2/PGC23RB5/KBI1/PGM22RB4/KBI0/AN921RB3/CANRX20RB2/INT2/CAN19RB1/INT1/AN818RB0/INT0/AN117VDD16VSSGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.825.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4mm
2. 2D FOOTPRINT
1234567891011121314151617181920212223242526272829E=6.00mm · Pitch e=0.50mmD=6.00mm-5-4-3-2-1012345543210-1-2-3-4-5mm
3. 3D CAD MODEL
Package Body: 6.00mm × 6.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (29/29)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1IOCEN[n]=1I/OMultiplexed I/O & Peripheral Pin IOCEN[n]=1 (General)
2RA3/AN3/VREF+AnalogMultiplexed I/O & Peripheral Pin RA3/AN3/VREF+ (General)
3RA4/T0CKII/OMultiplexed I/O & Peripheral Pin RA4/T0CKI (General)
4RA5/AN4/SS#/HLVDINI/OMultiplexed I/O & Peripheral Pin RA5/AN4/SS#/HLVDIN (General)
5VSSGNDGround Reference Pin (VSS)
6OSC1/CLKI/RA7I/OMultiplexed I/O & Peripheral Pin OSC1/CLKI/RA7 (RTC/CLK)
7OSC2/CLKO/RA6I/OMultiplexed I/O & Peripheral Pin OSC2/CLKO/RA6 (RTC/CLK)
8RC0/T1OSO/T13CKII/OMultiplexed I/O & Peripheral Pin RC0/T1OSO/T13CKI (General)
9RC1/T1OSII/OMultiplexed I/O & Peripheral Pin RC1/T1OSI (General)
10RC2/CCP1I/OMultiplexed I/O & Peripheral Pin RC2/CCP1 (General)
11RC3/SCK/SCLI/OMultiplexed I/O & Peripheral Pin RC3/SCK/SCL (SPI, I2C)
12RC4/SDI/SDAI/OMultiplexed I/O & Peripheral Pin RC4/SDI/SDA (I2C)
13RC5/SDOI/OMultiplexed I/O & Peripheral Pin RC5/SDO (General)
14RC6/TX/CKI/OMultiplexed I/O & Peripheral Pin RC6/TX/CK (General)
15RC7/RX/DTI/OMultiplexed I/O & Peripheral Pin RC7/RX/DT (General)
16VSSGNDGround Reference Pin (VSS)
17VDDPowerPower Supply Input (VDD — 1.8V to 5.5V)
18RB0/INT0/AN10I/OMultiplexed I/O & Peripheral Pin RB0/INT0/AN10 (General)
19RB1/INT1/AN8I/OMultiplexed I/O & Peripheral Pin RB1/INT1/AN8 (General)
20RB2/INT2/CANTXI/OMultiplexed I/O & Peripheral Pin RB2/INT2/CANTX (CAN)
21RB3/CANRXI/OMultiplexed I/O & Peripheral Pin RB3/CANRX (CAN)
22RB4/KBI0/AN9I/OMultiplexed I/O & Peripheral Pin RB4/KBI0/AN9 (General)
23RB5/KBI1/PGMI/OMultiplexed I/O & Peripheral Pin RB5/KBI1/PGM (General)
24RB6/KBI2/PGCI/OMultiplexed I/O & Peripheral Pin RB6/KBI2/PGC (General)
25RB7/KBI3/PGDI/OMultiplexed I/O & Peripheral Pin RB7/KBI3/PGD (General)
26MCLR#/VPP/RE3I/OMultiplexed I/O & Peripheral Pin MCLR#/VPP/RE3 (General)
27RA0/AN0I/OMultiplexed I/O & Peripheral Pin RA0/AN0 (General)
28RA1/AN1I/OMultiplexed I/O & Peripheral Pin RA1/AN1 (General)
29EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 IOCEN[n]=1
I/O
Multiplexed I/O & Peripheral Pin IOCEN[n]=1 (General)
Design note: Signal terminal IOCEN[n]=1 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: IOCEN[n]=1. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 14 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) - 2. Standard Pinout (Top View)
True package pinout (29 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) - 4. Package Dimensions (D×E×A)
QFN-28-EP(6x6) · 6.00×6.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) - 5. Recommended Land Pattern
IPC-7351B Footprint (29 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (14 figures · Page 1/2)
Showing 1–12 of 14 uncropped original figures for PIC18F27Q10T / PIC18F47Q10
P1 · p01_fig01456×280px
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) — 28/40/44-pin, Low-Power, High-Performance Microcontrollers
28/40/44-pin, Low-Power, High-Performance Microcontrollers
P69 · p69_fig011778×631px
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) — Figure 6-3. WAKE-UP FROM SLEEP THROUGH INTERRUPT
Figure 6-3. WAKE-UP FROM SLEEP THROUGH INTERRUPT
P271 · p271_fig011929×1663px
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) — Figure 16-1. Interrupt-on-Change Block Diagram (PORTA Example)
Figure 16-1. Interrupt-on-Change Block Diagram (PORTA Example)
P350 · p350_fig01930×595px
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) — Figure 21-2. Compare Mode Operation Block Diagram
Figure 21-2. Compare Mode Operation Block Diagram
P440 · p440_fig011469×1317px
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) — Figure 27-1. MSSP Block Diagram (SPI mode)
Figure 27-1. MSSP Block Diagram (SPI mode)
P441 · p441_fig011203×827px
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) — Figure 27-2. SPI Master and Multiple Slave Connection
Figure 27-2. SPI Master and Multiple Slave Connection
P761 · p761_fig011379×1512px
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) — Contact Pad to Center Pad (X26) G1 0.20
Contact Pad to Center Pad (X26) G1 0.20
P761 · p761_fig01P761
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) — Datasheet Page 761 (p761_fig01)
Datasheet Page 761 (p761_fig01)
P766 · p766_fig011035×909px
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) — MILLIMETERS MIN NOM 28
MILLIMETERS MIN NOM 28
P766 · p766_fig01P766
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) — Datasheet Page 766 (p766_fig01)
Datasheet Page 766 (p766_fig01)
P767 · p767_fig011170×1360px
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) — Contact Pad Length (X28) Contact Pad Width (X28) Y1 X1 0.80 0.20
Contact Pad Length (X28) Contact Pad Width (X28) Y1 X1 0.80 0.20
P771 · p771_fig011098×1119px
PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) — MILLIMETERS
MILLIMETERS
Page 1 / 2 (14 extracted figures)

Technical Specifications & Part Details (PIC18F27Q10T-I/ML)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) is a 28-pin standard electronic & interconnect component featuring a 6.00 × 6.00 × 1.00 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V to 5.5V supply operation across -40°C to 85°C with integrated UART, SPI, I2C, ADC, DAC, PWM, CAN, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to 85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
64 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
6.00 × 6.00 × 1.00 mm (A1=0.03 mm)
Package family: QFN (QFN-28-EP(6x6))
Pin Count & Lead PitchN / e
28 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, ADC, DAC, PWM, CAN, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol29 auto-grouped pins
OK
IPC-7351B Land Pattern29 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 3.84×3.84mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — PIC18F27Q10T / PIC18F47Q10 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (QFN-28-EP(6x6))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
6.00 × 6.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.00mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
29P / 29Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-28-EP(6x6)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC18F27Q10T-I/ML (QFN-28-EP(6x6))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC18F27Q10T-I/ML (QFN-28-EP(6x6))?

Manufactured by MICROCHIP, the PIC18F27Q10T-I/ML is housed in a QFN-28-EP(6x6) package with 29 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.8V to 5.5V. Key pins include: 1 (IOCEN[n]=1: Multiplexed I/O & Peripheral Pin IOCEN[n]=1 (General)), 2 (RA3/AN3/VREF+: Multiplexed I/O & Peripheral Pin RA3/AN3/VREF+ (General)), 3 (RA4/T0CKI: Multiplexed I/O & Peripheral Pin RA4/T0CKI (General)), 4 (RA5/AN4/SS#/HLVDIN: Multiplexed I/O & Peripheral Pin RA5/AN4/SS#/HLVDIN (General)), 5 (VSS: Ground Reference Pin (VSS)), 6 (OSC1/CLKI/RA7: Multiplexed I/O & Peripheral Pin OSC1/CLKI/RA7 (RTC/CLK)).

What are the IPC-7351B PCB Footprint dimensions for PIC18F27Q10T-I/ML?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC18F27Q10T-I/ML (QFN-28-EP(6x6)) has a nominal body envelope of 6.00 × 6.00 mm, pitch e = 0.50 mm, and 29 copper pads plus a central exposed thermal pad (EPAD) of 3.84 × 3.84 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC18F27Q10T-I/ML?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC18F27Q10T-I/ML (MICROCHIP, QFN-28-EP(6x6)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (29 pins) & PIC18F27Q10T / PIC18F47Q10 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1IOCEN[n]=1Digital_IOSignal terminal IOCEN[n]=1 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: IOCEN[n]=1. Supported peripheral buses: General.
2RA3/AN3/VREF+AnalogSignal terminal RA3/AN3/VREF+ (Analog, 1.8V to 5.5V domain). Multiplexed alternate functions: RA3/AN3/VREF+. Supported peripheral buses: General.
3RA4/T0CKIDigital_IOSignal terminal RA4/T0CKI (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RA4/T0CKI. Supported peripheral buses: General.
4RA5/AN4/SS#/HLVDINDigital_IOSignal terminal RA5/AN4/SS#/HLVDIN (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RA5/AN4/SS#/HLVDIN. Supported peripheral buses: General.
5VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
6OSC1/CLKI/RA7Digital_IOSignal terminal OSC1/CLKI/RA7 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: OSC1/CLKI/RA7. Supported peripheral buses: RTC/CLK.
7OSC2/CLKO/RA6Digital_IOSignal terminal OSC2/CLKO/RA6 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: OSC2/CLKO/RA6. Supported peripheral buses: RTC/CLK.
8RC0/T1OSO/T13CKIDigital_IOSignal terminal RC0/T1OSO/T13CKI (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RC0/T1OSO/T13CKI. Supported peripheral buses: General.
9RC1/T1OSIDigital_IOSignal terminal RC1/T1OSI (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RC1/T1OSI. Supported peripheral buses: General.
10RC2/CCP1Digital_IOSignal terminal RC2/CCP1 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RC2/CCP1. Supported peripheral buses: General.
11RC3/SCK/SCLDigital_IOSignal terminal RC3/SCK/SCL (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RC3/SCK/SCL. Supported peripheral buses: SPI, I2C.
12RC4/SDI/SDADigital_IOSignal terminal RC4/SDI/SDA (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RC4/SDI/SDA. Supported peripheral buses: I2C.
13RC5/SDODigital_IOSignal terminal RC5/SDO (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RC5/SDO. Supported peripheral buses: General.
14RC6/TX/CKDigital_IOSignal terminal RC6/TX/CK (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RC6/TX/CK. Supported peripheral buses: General.
15RC7/RX/DTDigital_IOSignal terminal RC7/RX/DT (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RC7/RX/DT. Supported peripheral buses: General.
16VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
17VDDPower_InPrimary positive power supply input (VDD) operating in the 1.8V to 5.5V domain (Max rating: 5.5V).
18RB0/INT0/AN10Digital_IOSignal terminal RB0/INT0/AN10 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RB0/INT0/AN10. Supported peripheral buses: General.
19RB1/INT1/AN8Digital_IOSignal terminal RB1/INT1/AN8 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RB1/INT1/AN8. Supported peripheral buses: General.
20RB2/INT2/CANTXRF_50OhmSignal terminal RB2/INT2/CANTX (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RB2/INT2/CANTX. Supported peripheral buses: CAN.
21RB3/CANRXDigital_IOSignal terminal RB3/CANRX (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RB3/CANRX. Supported peripheral buses: CAN.
22RB4/KBI0/AN9Digital_IOSignal terminal RB4/KBI0/AN9 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RB4/KBI0/AN9. Supported peripheral buses: General.
23RB5/KBI1/PGMDigital_IOSignal terminal RB5/KBI1/PGM (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RB5/KBI1/PGM. Supported peripheral buses: General.
24RB6/KBI2/PGCDigital_IOSignal terminal RB6/KBI2/PGC (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RB6/KBI2/PGC. Supported peripheral buses: General.
25RB7/KBI3/PGDDigital_IOSignal terminal RB7/KBI3/PGD (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RB7/KBI3/PGD. Supported peripheral buses: General.
26MCLR#/VPP/RE3Digital_IOSignal terminal MCLR#/VPP/RE3 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: MCLR#/VPP/RE3. Supported peripheral buses: General.
27RA0/AN0Digital_IOSignal terminal RA0/AN0 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RA0/AN0. Supported peripheral buses: General.
28RA1/AN1Digital_IOSignal terminal RA1/AN1 (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: RA1/AN1. Supported peripheral buses: General.
29EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.