PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

PIC16LF1939T-I/ML

MICROCHIPUQFN-28-EP(4x4) · 29 Pins · Pitch 0.50mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · PIC16LF1939T-I/ML (UQFN-28-EP(4x4))1SEG2/RA22SEG3/RA33COM3/SEG2/RA4VBAT/RA55VSS6SEG7/RA77SEG6/RA68RC09RC110COM2/SEG18/R11SEG19/RC312SEG20/RC413VLCD314COM5/SEG22/V15RC7/VLCD1/CO29EP28RA1/SEG127RA0/SEG026RE3/MCLR#/VP25RB7/ICSPDAT/24RB6/ICSPCLK/23RB5/COM1/SEG22RB4/COM021RB3/CFLY2/CO20RB2/CFLY1/CO19RB1/SEG918RB0/SEG817VDD16VSSGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.825.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4mm
2. 2D FOOTPRINT
1234567891011121314151617181920212223242526272829E=4.00mm · Pitch e=0.50mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (29/29)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1SEG2/RA2I/OMultiplexed I/O & Peripheral Pin SEG2/RA2 (General)
2SEG3/RA3I/OMultiplexed I/O & Peripheral Pin SEG3/RA3 (General)
3COM3/SEG2/RA4I/OMultiplexed I/O & Peripheral Pin COM3/SEG2/RA4 (General)
4VBAT/RA5PowerPower Supply Input (VBAT/RA5 — 1.8V-5.5V)
5VSSGNDGround Reference Pin (VSS)
6SEG7/RA7I/OMultiplexed I/O & Peripheral Pin SEG7/RA7 (General)
7SEG6/RA6I/OMultiplexed I/O & Peripheral Pin SEG6/RA6 (General)
8RC0I/OMultiplexed I/O & Peripheral Pin RC0 (General)
9RC1I/OMultiplexed I/O & Peripheral Pin RC1 (General)
10COM2/SEG18/RC2I/OMultiplexed I/O & Peripheral Pin COM2/SEG18/RC2 (General)
11SEG19/RC3I/OMultiplexed I/O & Peripheral Pin SEG19/RC3 (General)
12SEG20/RC4I/OMultiplexed I/O & Peripheral Pin SEG20/RC4 (General)
13VLCD3I/OMultiplexed I/O & Peripheral Pin VLCD3 (General)
14COM5/SEG22/VLCD2/RC6I/OMultiplexed I/O & Peripheral Pin COM5/SEG22/VLCD2/RC6 (General)
15RC7/VLCD1/COM4/SEG23I/OMultiplexed I/O & Peripheral Pin RC7/VLCD1/COM4/SEG23 (General)
16VSSGNDGround Reference Pin (VSS)
17VDDPowerPower Supply Input (VDD — 1.8V-5.5V)
18RB0/SEG8I/OMultiplexed I/O & Peripheral Pin RB0/SEG8 (General)
19RB1/SEG9I/OMultiplexed I/O & Peripheral Pin RB1/SEG9 (General)
20RB2/CFLY1/COM7/SEG10I/OMultiplexed I/O & Peripheral Pin RB2/CFLY1/COM7/SEG10 (General)
21RB3/CFLY2/COM6/SEG11I/OMultiplexed I/O & Peripheral Pin RB3/CFLY2/COM6/SEG11 (General)
22RB4/COM0I/OMultiplexed I/O & Peripheral Pin RB4/COM0 (General)
23RB5/COM1/SEG13I/OMultiplexed I/O & Peripheral Pin RB5/COM1/SEG13 (General)
24RB6/ICSPCLK/SEG14I/OMultiplexed I/O & Peripheral Pin RB6/ICSPCLK/SEG14 (General)
25RB7/ICSPDAT/SEG15I/OMultiplexed I/O & Peripheral Pin RB7/ICSPDAT/SEG15 (General)
26RE3/MCLR#/VPPI/OMultiplexed I/O & Peripheral Pin RE3/MCLR#/VPP (General)
27RA0/SEG0I/OMultiplexed I/O & Peripheral Pin RA0/SEG0 (General)
28RA1/SEG1I/OMultiplexed I/O & Peripheral Pin RA1/SEG1 (General)
29EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 SEG2/RA2
I/O
Multiplexed I/O & Peripheral Pin SEG2/RA2 (General)
Design note: Signal terminal SEG2/RA2 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: SEG2/RA2. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 14 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) - 2. Standard Pinout (Top View)
True package pinout (29 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) - 4. Package Dimensions (D×E×A)
UQFN-28-EP(4x4) · 4.00×4.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (29 Pads)Expand ›
6. Application SchematicSCHEMATIC
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (14 figures · Page 1/2)
Showing 1–12 of 14 uncropped original figures for PIC16LF1939T
P1 · p01_fig01376×200px
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) — 28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers with
28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers with
P196 · p196_fig011618×516px
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) — FIGURE 23-1: CAPTURE MODE OPERATION BLOCK DIAGRAM
FIGURE 23-1: CAPTURE MODE OPERATION BLOCK DIAGRAM
P198 · p198_fig011718×795px
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) — FIGURE 23-2: COMPARE MODE OPERATION BLOCK DIAGRAM
FIGURE 23-2: COMPARE MODE OPERATION BLOCK DIAGRAM
P205 · p205_fig011536×999px
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) — FIGURE 23-6: EXAMPLE PWM (ENHANCED MODE) OUTPUT RELATIONSHIPS (ACTIVE-HIGH STATE)
FIGURE 23-6: EXAMPLE PWM (ENHANCED MODE) OUTPUT RELATIONSHIPS (ACTIVE-HIGH STATE)
P205 · p205_fig01P205
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) — Datasheet Page 205 (p205_fig01)
Datasheet Page 205 (p205_fig01)
P216 · p216_fig011738×565px
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) — FIGURE 23-19: EXAMPLE OF STEERING EVENT AT END OF INSTRUCTION (STRxSYNC = 0)
FIGURE 23-19: EXAMPLE OF STEERING EVENT AT END OF INSTRUCTION (STRxSYNC = 0)
P216 · p216_fig021777×720px
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) — FIGURE 23-20: EXAMPLE OF STEERING EVENT AT BEGINNING OF INSTRUCTION (STRxSYNC = 1)
FIGURE 23-20: EXAMPLE OF STEERING EVENT AT BEGINNING OF INSTRUCTION (STRxSYNC = 1)
P235 · p235_fig01867×589px
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) — FIGURE 24-11: I2C HOST/ CLIENT CONNECTION
FIGURE 24-11: I2C HOST/ CLIENT CONNECTION
P349 · p349_fig011416×1013px
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) — FIGURE 28-4: TYPICAL CONNECTION FOR ICSP™ PROGRAMMING
FIGURE 28-4: TYPICAL CONNECTION FOR ICSP™ PROGRAMMING
P349 · p349_fig01P349
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) — Datasheet Page 349 (p349_fig01)
Datasheet Page 349 (p349_fig01)
P451 · p451_fig011099×1271px
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) — Contact Pad Length (X28) Contact Pad Width (X28) Y1 X1 0.80 0.20
Contact Pad Length (X28) Contact Pad Width (X28) Y1 X1 0.80 0.20
P454 · p454_fig011237×1337px
PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) — Contact Pad Length (X40) Contact Pad Width (X40) Y1 X1 0.80 0.20
Contact Pad Length (X40) Contact Pad Width (X40) Y1 X1 0.80 0.20
Page 1 / 2 (14 extracted figures)

Technical Specifications & Part Details (PIC16LF1939T-I/ML)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) is a 28-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 0.50 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V-5.5V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated UART, SPI, I2C, ADC, DAC, PWM interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V-5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
32 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 0.50 mm (A1=0.03 mm)
Package family: QFN (UQFN-28-EP(4x4))
Pin Count & Lead PitchN / e
28 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, ADC, DAC, PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol29 auto-grouped pins
OK
IPC-7351B Land Pattern29 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.60×2.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (UQFN-28-EP(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.50mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
29P / 29Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
UQFN-28-EP(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — PIC16LF1939T-I/ML (UQFN-28-EP(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of PIC16LF1939T-I/ML (UQFN-28-EP(4x4))?

Manufactured by MICROCHIP, the PIC16LF1939T-I/ML is housed in a UQFN-28-EP(4x4) package with 29 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.8V-5.5V. Key pins include: 1 (SEG2/RA2: Multiplexed I/O & Peripheral Pin SEG2/RA2 (General)), 2 (SEG3/RA3: Multiplexed I/O & Peripheral Pin SEG3/RA3 (General)), 3 (COM3/SEG2/RA4: Multiplexed I/O & Peripheral Pin COM3/SEG2/RA4 (General)), 4 (VBAT/RA5: Power Supply Input (VBAT/RA5 — 1.8V-5.5V)), 5 (VSS: Ground Reference Pin (VSS)), 6 (SEG7/RA7: Multiplexed I/O & Peripheral Pin SEG7/RA7 (General)).

What are the IPC-7351B PCB Footprint dimensions for PIC16LF1939T-I/ML?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), PIC16LF1939T-I/ML (UQFN-28-EP(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.50 mm, and 29 copper pads plus a central exposed thermal pad (EPAD) of 2.60 × 2.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for PIC16LF1939T-I/ML?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for PIC16LF1939T-I/ML (MICROCHIP, UQFN-28-EP(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (29 pins) & PIC16LF1939T Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1SEG2/RA2Digital_IOSignal terminal SEG2/RA2 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: SEG2/RA2. Supported peripheral buses: General.
2SEG3/RA3Digital_IOSignal terminal SEG3/RA3 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: SEG3/RA3. Supported peripheral buses: General.
3COM3/SEG2/RA4Digital_IOSignal terminal COM3/SEG2/RA4 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: COM3/SEG2/RA4. Supported peripheral buses: General.
4VBAT/RA5Power_InPrimary positive power supply input (VBAT/RA5) operating in the 1.8V-5.5V domain (Max rating: 5.5V).
5VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
6SEG7/RA7Digital_IOSignal terminal SEG7/RA7 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: SEG7/RA7. Supported peripheral buses: General.
7SEG6/RA6Digital_IOSignal terminal SEG6/RA6 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: SEG6/RA6. Supported peripheral buses: General.
8RC0Digital_IOSignal terminal RC0 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: RC0. Supported peripheral buses: General.
9RC1Digital_IOSignal terminal RC1 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: RC1. Supported peripheral buses: General.
10COM2/SEG18/RC2Digital_IOSignal terminal COM2/SEG18/RC2 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: COM2/SEG18/RC2. Supported peripheral buses: General.
11SEG19/RC3Digital_IOSignal terminal SEG19/RC3 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: SEG19/RC3. Supported peripheral buses: General.
12SEG20/RC4Digital_IOSignal terminal SEG20/RC4 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: SEG20/RC4. Supported peripheral buses: General.
13VLCD3Digital_IOSignal terminal VLCD3 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: VLCD3. Supported peripheral buses: General.
14COM5/SEG22/VLCD2/RC6Digital_IOSignal terminal COM5/SEG22/VLCD2/RC6 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: COM5/SEG22/VLCD2/RC6. Supported peripheral buses: General.
15RC7/VLCD1/COM4/SEG23Digital_IOSignal terminal RC7/VLCD1/COM4/SEG23 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: RC7/VLCD1/COM4/SEG23. Supported peripheral buses: General.
16VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
17VDDPower_InPrimary positive power supply input (VDD) operating in the 1.8V-5.5V domain (Max rating: 5.5V).
18RB0/SEG8Digital_IOSignal terminal RB0/SEG8 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: RB0/SEG8. Supported peripheral buses: General.
19RB1/SEG9Digital_IOSignal terminal RB1/SEG9 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: RB1/SEG9. Supported peripheral buses: General.
20RB2/CFLY1/COM7/SEG10Digital_IOSignal terminal RB2/CFLY1/COM7/SEG10 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: RB2/CFLY1/COM7/SEG10. Supported peripheral buses: General.
21RB3/CFLY2/COM6/SEG11Digital_IOSignal terminal RB3/CFLY2/COM6/SEG11 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: RB3/CFLY2/COM6/SEG11. Supported peripheral buses: General.
22RB4/COM0Digital_IOSignal terminal RB4/COM0 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: RB4/COM0. Supported peripheral buses: General.
23RB5/COM1/SEG13Digital_IOSignal terminal RB5/COM1/SEG13 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: RB5/COM1/SEG13. Supported peripheral buses: General.
24RB6/ICSPCLK/SEG14Digital_IOSignal terminal RB6/ICSPCLK/SEG14 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: RB6/ICSPCLK/SEG14. Supported peripheral buses: General.
25RB7/ICSPDAT/SEG15Digital_IOSignal terminal RB7/ICSPDAT/SEG15 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: RB7/ICSPDAT/SEG15. Supported peripheral buses: General.
26RE3/MCLR#/VPPDigital_IOSignal terminal RE3/MCLR#/VPP (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: RE3/MCLR#/VPP. Supported peripheral buses: General.
27RA0/SEG0Digital_IOSignal terminal RA0/SEG0 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: RA0/SEG0. Supported peripheral buses: General.
28RA1/SEG1Digital_IOSignal terminal RA1/SEG1 (I/O, 1.8V-5.5V domain). Multiplexed alternate functions: RA1/SEG1. Supported peripheral buses: General.
29EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.