TC646EUA713 (MSOP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

TC646EUA713

MICROCHIPMSOP-8 · 8 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · TC646EUA713 (MSOP-8)1V IN2C F3V AS4GND8VDD7V OUT6FAULT5SENSEGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.00mm · Pitch e=0.65mmD=3.00mm-5-4-3-2-10123453210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1V INI/OMultiplexed I/O & Peripheral Pin V IN (General)
2C FI/OMultiplexed I/O & Peripheral Pin C F (General)
3V ASI/OMultiplexed I/O & Peripheral Pin V AS (General)
4GNDGNDGround Reference Pin (GND)
5SENSEI/OMultiplexed I/O & Peripheral Pin SENSE (General)
6FAULTI/OMultiplexed I/O & Peripheral Pin FAULT (General)
7V OUTI/OMultiplexed I/O & Peripheral Pin V OUT (General)
8VDDPowerPower Supply Input (VDD — 3.0V to 5.5V)
PIN 1 V IN
I/O
Multiplexed I/O & Peripheral Pin V IN (General)
Design note: Analog Input
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 12 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
TC646EUA713 (MSOP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
TC646EUA713 (MSOP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
TC646EUA713 (MSOP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
TC646EUA713 (MSOP-8) - 4. Package Dimensions (D×E×A)
MSOP-8 · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
TC646EUA713 (MSOP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
TC646EUA713 (MSOP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (12 figures · Page 1/1)
Showing 1–12 of 12 uncropped original figures for TC646
P2 · p02_fig011166×1382px
TC646EUA713 (MSOP-8) — Functional Block Diagram
Functional Block Diagram
P10 · p10_fig011780×1379px
TC646EUA713 (MSOP-8) — FIGURE 5-1: Typical Application Circuit.
FIGURE 5-1: Typical Application Circuit.
P10 · p10_fig01P10
TC646EUA713 (MSOP-8) — Datasheet Page 10 (p10_fig01)
Datasheet Page 10 (p10_fig01)
P11 · p11_fig011779×1229px
TC646EUA713 (MSOP-8) — FIGURE 5-2: Temperature Sensing Circuit.
FIGURE 5-2: Temperature Sensing Circuit.
P11 · p11_fig02869×363px
TC646EUA713 (MSOP-8) — FIGURE 5-2: Temperature Sensing Circuit.
FIGURE 5-2: Temperature Sensing Circuit.
P18 · p18_fig021777×796px
TC646EUA713 (MSOP-8) — DS21446D-page 18  2002-2012 Microchip Technology Inc. | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer
DS21446D-page 18  2002-2012 Microchip Technology Inc. | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer
P18 · p18_fig02P18
TC646EUA713 (MSOP-8) — Datasheet Page 18 (p18_fig02)
Datasheet Page 18 (p18_fig02)
P20 · p20_fig011382×1001px
TC646EUA713 (MSOP-8) — 2 | 1 | D | n | p | B | E | E1 | h | L  | c | 45× | f | A2 |  | A | A1 | Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging
2 | 1 | D | n | p | B | E | E1 | h | L  | c | 45× | f | A2 |  | A | A1 | Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging
P20 · p20_fig021441×750px
TC646EUA713 (MSOP-8) — L 
L 
P21 · p21_fig011615×2030px
TC646EUA713 (MSOP-8) —  2002-2012 Microchip Technology Inc. DS21446D-page 21
 2002-2012 Microchip Technology Inc. DS21446D-page 21
P1 · p01_fig01All Packages in PDF
TC646EUA713 (MSOP-8) — Applications
Applications
P18 · p18_fig01All Packages in PDF
TC646EUA713 (MSOP-8) — 6.1 Package Marking Information
6.1 Package Marking Information

Technical Specifications & Part Details (TC646EUA713)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:TC646EUA713 (MSOP-8) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.10 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 3.0V to 5.5V supply operation across -40°C to +125°C with integrated PWM interfaces.
Operating Supply VoltageV_CC / V_DD
3.0V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.10 mm (A1=0.08 mm)
Package family: TSSOP (MSOP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MSOP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.65mm
Pad Size (W × L)Level B
0.40 × 1.25 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MSOP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — TC646EUA713 (MSOP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of TC646EUA713 (MSOP-8)?

Manufactured by MICROCHIP, the TC646EUA713 is housed in a MSOP-8 package with 8 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 3.0V to 5.5V. Key pins include: 1 (V IN: Multiplexed I/O & Peripheral Pin V IN (General)), 2 (C F: Multiplexed I/O & Peripheral Pin C F (General)), 3 (V AS: Multiplexed I/O & Peripheral Pin V AS (General)), 4 (GND: Ground Reference Pin (GND)), 5 (SENSE: Multiplexed I/O & Peripheral Pin SENSE (General)), 6 (FAULT: Multiplexed I/O & Peripheral Pin FAULT (General)).

What are the IPC-7351B PCB Footprint dimensions for TC646EUA713?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), TC646EUA713 (MSOP-8) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for TC646EUA713?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for TC646EUA713 (MICROCHIP, MSOP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & TC646 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1V INDigital_IOSignal terminal V IN (I/O, 3.0V to 5.5V domain). Multiplexed alternate functions: V IN. Supported peripheral buses: General.
2C FDigital_IOSignal terminal C F (I/O, 3.0V to 5.5V domain). Multiplexed alternate functions: C F. Supported peripheral buses: General.
3V ASDigital_IOSignal terminal V AS (I/O, 3.0V to 5.5V domain). Multiplexed alternate functions: V AS. Supported peripheral buses: General.
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5SENSEDigital_IOSignal terminal SENSE (I/O, 3.0V to 5.5V domain). Multiplexed alternate functions: SENSE. Supported peripheral buses: General.
6FAULTDigital_IOSignal terminal FAULT (I/O, 3.0V to 5.5V domain). Multiplexed alternate functions: FAULT. Supported peripheral buses: General.
7V OUTDigital_IOSignal terminal V OUT (I/O, 3.0V to 5.5V domain). Multiplexed alternate functions: V OUT. Supported peripheral buses: General.
8VDDPower_InPrimary positive power supply input (VDD) operating in the 3.0V to 5.5V domain (Max rating: 5.5V).