TC1301B-APAVUATR (MSOP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

TC1301B-APAVUATR

MICROCHIPMSOP-8 · 8 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · TC1301B-APAVUATR (MSOP-8)1RESET2V OUT13GND4Bypass8SHDN17V IN6V OUT25SHDN2Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.00mm · Pitch e=0.65mmD=3.00mm-5-4-3-2-10123453210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1RESETISystem Enable & Hardware Reset (RESET)
2V OUT1I/OMultiplexed I/O & Peripheral Pin V OUT1 (General)
3GNDGNDGround Reference Pin (GND)
4BypassI/OMultiplexed I/O & Peripheral Pin Bypass (CAN)
5SHDN2I/OMultiplexed I/O & Peripheral Pin SHDN2 (General)
6V OUT2I/OMultiplexed I/O & Peripheral Pin V OUT2 (General)
7V INI/OMultiplexed I/O & Peripheral Pin V IN (General)
8SHDN1I/OMultiplexed I/O & Peripheral Pin SHDN1 (General)
PIN 1 RESET
I
System Enable & Hardware Reset (RESET)
Design note: Push-pull output pin that will remain low while V is below the reset threshold and for DET 300 ms after V rises above the reset threshold OUT1
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
TC1301B-APAVUATR (MSOP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
TC1301B-APAVUATR (MSOP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
TC1301B-APAVUATR (MSOP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
TC1301B-APAVUATR (MSOP-8) - 4. Package Dimensions (D×E×A)
MSOP-8 · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
TC1301B-APAVUATR (MSOP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
TC1301B-APAVUATR (MSOP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for TC1301
P1 · p01_fig01EXACT PACKAGE
TC1301B-APAVUATR (MSOP-8) — © 2008 Microchip Technology Inc. DS21798C-page 1
© 2008 Microchip Technology Inc. DS21798C-page 1
P19 · p19_fig02EXACT PACKAGE
TC1301B-APAVUATR (MSOP-8) — FIGURE 7-1: MSOP8 Silk Screen Layer.
FIGURE 7-1: MSOP8 Silk Screen Layer.
P19 · p19_fig03EXACT PACKAGE
TC1301B-APAVUATR (MSOP-8) — FIGURE 7-1: MSOP8 Silk Screen Layer.
FIGURE 7-1: MSOP8 Silk Screen Layer.
P2 · p02_fig011777×974px
TC1301B-APAVUATR (MSOP-8) — Typical Application Circuits
Typical Application Circuits
P2 · p02_fig021777×1536px
TC1301B-APAVUATR (MSOP-8) — DS21798C-page 2 © 2008 Microchip Technology Inc. | Typical Application Circuits | VOUT1 | 8 | 4 | 1 | 2 | 3 | RESET | GND | VDET | BATTERY | COUT1 1 µF Ceramic X5R | CIN 1 µF | TC1301A | COUT2 1 µF Ceramic X5R CBYPASS (Note) 10 nF Ceramic |
DS21798C-page 2 © 2008 Microchip Technology Inc. | Typical Application Circuits | VOUT1 | 8 | 4 | 1 | 2 | 3 | RESET | GND | VDET | BATTERY | COUT1 1 µF Ceramic X5R | CIN 1 µF | TC1301A | COUT2 1 µF Ceramic X5R CBYPASS (Note) 10 nF Ceramic |
P2 · p02_fig02P2
TC1301B-APAVUATR (MSOP-8) — Datasheet Page 2 (p02_fig02)
Datasheet Page 2 (p02_fig02)
P17 · p17_fig011778×1900px
TC1301B-APAVUATR (MSOP-8) — VOUT2 = 150 mA maximum
VOUT2 = 150 mA maximum
P19 · p19_fig011779×1101px
TC1301B-APAVUATR (MSOP-8) — FIGURE 7-3: 3x3 DFN Silk-Screen Example. 8-lead 3X3 DFN physical layout example with bypass capacitor.
FIGURE 7-3: 3x3 DFN Silk-Screen Example. 8-lead 3X3 DFN physical layout example with bypass capacitor.
P20 · p20_fig011779×2734px
TC1301B-APAVUATR (MSOP-8) — TC1301A/B TC1301A TC1301B | DS21798C-page 20 © 2008 Microchip Technology Inc. | 9.0 PACKAGING INFORMATION | 9.1 Package Marking Information | X1 represents VOUT1 configuration: | X2 represents VOUT2 configuration: | Xr represents the reset
TC1301A/B TC1301A TC1301B | DS21798C-page 20 © 2008 Microchip Technology Inc. | 9.0 PACKAGING INFORMATION | 9.1 Package Marking Information | X1 represents VOUT1 configuration: | X2 represents VOUT2 configuration: | Xr represents the reset
P20 · p20_fig01P20
TC1301B-APAVUATR (MSOP-8) — Datasheet Page 20 (p20_fig01)
Datasheet Page 20 (p20_fig01)

Technical Specifications & Part Details (TC1301B-APAVUATR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:TC1301B-APAVUATR (MSOP-8) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.10 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 1.5V to 3.3V supply operation across -40°C to +125°C with integrated CAN interfaces.
Operating Supply VoltageV_CC / V_DD
1.5V to 3.3V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
116 µA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.10 mm (A1=0.08 mm)
Package family: TSSOP (MSOP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
CAN
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — TC1301 (5)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (MSOP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.65mm
Pad Size (W × L)Level B
0.40 × 1.25 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MSOP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — TC1301B-APAVUATR (MSOP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of TC1301B-APAVUATR (MSOP-8)?

Manufactured by MICROCHIP, the TC1301B-APAVUATR is housed in a MSOP-8 package with 8 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 1.5V to 3.3V. Key pins include: 1 (RESET: System Enable & Hardware Reset (RESET)), 2 (V OUT1: Multiplexed I/O & Peripheral Pin V OUT1 (General)), 3 (GND: Ground Reference Pin (GND)), 4 (Bypass: Multiplexed I/O & Peripheral Pin Bypass (CAN)), 5 (SHDN2: Multiplexed I/O & Peripheral Pin SHDN2 (General)), 6 (V OUT2: Multiplexed I/O & Peripheral Pin V OUT2 (General)).

What are the IPC-7351B PCB Footprint dimensions for TC1301B-APAVUATR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), TC1301B-APAVUATR (MSOP-8) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for TC1301B-APAVUATR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for TC1301B-APAVUATR (MICROCHIP, MSOP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & TC1301 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1RESETDigital_IOActive-low hardware reset terminal (RESET): pulling this pin Low resets the processor core and peripherals.
2V OUT1Digital_IOSignal terminal V OUT1 (I/O, 1.5V to 3.3V domain). Multiplexed alternate functions: V OUT1. Supported peripheral buses: General.
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4BypassDigital_IOSignal terminal Bypass (I/O, 1.5V to 3.3V domain). Multiplexed alternate functions: Bypass. Supported peripheral buses: CAN.
5SHDN2Digital_IOSignal terminal SHDN2 (I/O, 1.5V to 3.3V domain). Multiplexed alternate functions: SHDN2. Supported peripheral buses: General.
6V OUT2Digital_IOSignal terminal V OUT2 (I/O, 1.5V to 3.3V domain). Multiplexed alternate functions: V OUT2. Supported peripheral buses: General.
7V INDigital_IOSignal terminal V IN (I/O, 1.5V to 3.3V domain). Multiplexed alternate functions: V IN. Supported peripheral buses: General.
8SHDN1Digital_IOSignal terminal SHDN1 (I/O, 1.5V to 3.3V domain). Multiplexed alternate functions: SHDN1. Supported peripheral buses: General.