MIC5216-3.3YMM-TR (MSOP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC5216-3.3YMM-TR

MICROCHIPMSOP-8 · 8 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC5216-3.3YMM-TR (MSOP-8)1EN2IN3OUT4FLG8GND7GND6GND5GNDGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.00mm · Pitch e=0.65mmD=3.00mm-5-4-3-2-10123453210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1ENISystem Enable & Hardware Reset (EN)
2INI/OMultiplexed I/O & Peripheral Pin IN (General)
3OUTI/OMultiplexed I/O & Peripheral Pin OUT (General)
4FLGI/OMultiplexed I/O & Peripheral Pin FLG (General)
5GNDGNDGround Reference Pin (GND)
6GNDGNDGround Reference Pin (GND)
7GNDGNDGround Reference Pin (GND)
8GNDGNDGround Reference Pin (GND)
PIN 1 EN
I
System Enable & Hardware Reset (EN)
Design note: Chip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 15 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC5216-3.3YMM-TR (MSOP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC5216-3.3YMM-TR (MSOP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC5216-3.3YMM-TR (MSOP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC5216-3.3YMM-TR (MSOP-8) - 4. Package Dimensions (D×E×A)
MSOP-8 · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC5216-3.3YMM-TR (MSOP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC5216-3.3YMM-TR (MSOP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (15 figures · Page 1/2)
Showing 1–12 of 15 uncropped original figures for MIC5216
P3 · p03_fig01EXACT PACKAGE
MIC5216-3.3YMM-TR (MSOP-8) — Pin Configuration
Pin Configuration
P3 · p03_fig02EXACT PACKAGE
MIC5216-3.3YMM-TR (MSOP-8) — Micrel, Inc. MIC5216
Micrel, Inc. MIC5216
P3 · p03_fig03EXACT PACKAGE
MIC5216-3.3YMM-TR (MSOP-8) — MIC5216-xxBM5/YM5 SOT-23-5 Fixed Voltages Pin Description | Pin Number MSOP-8 Pin Number SOT-23-5 Pin Name Pin Function | 2 1 IN Supply Input | 5-8 2 GND Ground: MSOP-8 pins 5 through 8 are internally connected. | 3 5 OUT Regulator Output |
MIC5216-xxBM5/YM5 SOT-23-5 Fixed Voltages Pin Description | Pin Number MSOP-8 Pin Number SOT-23-5 Pin Name Pin Function | 2 1 IN Supply Input | 5-8 2 GND Ground: MSOP-8 pins 5 through 8 are internally connected. | 3 5 OUT Regulator Output |
P11 · p11_fig01EXACT PACKAGE
MIC5216-3.3YMM-TR (MSOP-8) — Micrel, Inc. MIC5216 | a. 25°C Ambient b. 50°C Ambient c. 85°C Ambient Figure 3. MIC5216-x.xBMM (MSOP-8) on Minimum Recommended Footprint
Micrel, Inc. MIC5216 | a. 25°C Ambient b. 50°C Ambient c. 85°C Ambient Figure 3. MIC5216-x.xBMM (MSOP-8) on Minimum Recommended Footprint
P11 · p11_fig02EXACT PACKAGE
MIC5216-3.3YMM-TR (MSOP-8) — The total power dissipation of the device under these conditions is the sum of the two power dissipation figures.
The total power dissipation of the device under these conditions is the sum of the two power dissipation figures.
P11 · p11_fig03EXACT PACKAGE
MIC5216-3.3YMM-TR (MSOP-8) — Figure 5. Low-Noise Fixed Voltage Regulator
Figure 5. Low-Noise Fixed Voltage Regulator
P12 · p12_fig01EXACT PACKAGE
MIC5216-3.3YMM-TR (MSOP-8) — Micrel, Inc. MIC5216 | March 2007 12 M9999-032307 | Package Information | 8-Pin MSOP (MM) | SOT-23-5 (M5)
Micrel, Inc. MIC5216 | March 2007 12 M9999-032307 | Package Information | 8-Pin MSOP (MM) | SOT-23-5 (M5)
P1 · p01_fig01649×474px
MIC5216-3.3YMM-TR (MSOP-8) — MM8 and Micrel Mini 8 are trademarks of Micrel, Inc.
MM8 and Micrel Mini 8 are trademarks of Micrel, Inc.
P1 · p01_fig02777×346px
MIC5216-3.3YMM-TR (MSOP-8) — 5V Low-Noise Regulator 3.3V Low-Noise Regulator
5V Low-Noise Regulator 3.3V Low-Noise Regulator
P3 · p03_fig01P3
MIC5216-3.3YMM-TR (MSOP-8) — Datasheet Page 3 (p03_fig01)
Datasheet Page 3 (p03_fig01)
P6 · p06_fig01557×550px
MIC5216-3.3YMM-TR (MSOP-8) — 0.0001 | 0.001 | 0.01 | 0.1 | 1 | 10 | 1E+11E+21E+31E+41E+51E+61E+7 | ( E S I O N µ / V )z H | FREQUENCY (Hz) | Noise Performance | 10 100 1k 10k 100k 1M 10M | 10mA, COUT = 1µF | VOUT = 5V | 500mA Pending
0.0001 | 0.001 | 0.01 | 0.1 | 1 | 10 | 1E+11E+21E+31E+41E+51E+61E+7 | ( E S I O N µ / V )z H | FREQUENCY (Hz) | Noise Performance | 10 100 1k 10k 100k 1M 10M | 10mA, COUT = 1µF | VOUT = 5V | 500mA Pending
P6 · p06_fig02557×550px
MIC5216-3.3YMM-TR (MSOP-8) — 0.0001 | 0.001 | 0.01 | 0.1 | 1 | 10 | 1E+11E+21E+31E+41E+51E+61E+7 | ( E S I O N µ / V )z H | FREQUENCY (Hz) | Noise Performance | 10mA | 1mA | 100mA | 10 100 1k 10k 100k 1M 10M | VOUT = 5V COUT = 10µF electrolytic | 500mA Pending
0.0001 | 0.001 | 0.01 | 0.1 | 1 | 10 | 1E+11E+21E+31E+41E+51E+61E+7 | ( E S I O N µ / V )z H | FREQUENCY (Hz) | Noise Performance | 10mA | 1mA | 100mA | 10 100 1k 10k 100k 1M 10M | VOUT = 5V COUT = 10µF electrolytic | 500mA Pending
Page 1 / 2 (15 extracted figures)

Technical Specifications & Part Details (MIC5216-3.3YMM-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC5216-3.3YMM-TR (MSOP-8) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.10 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 2.5V to 12V supply operation across 40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
2.5V to 12V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
150mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.10 mm (A1=0.08 mm)
Package family: TSSOP (MSOP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MSOP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.65mm
Pad Size (W × L)Level B
0.40 × 1.25 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MSOP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC5216-3.3YMM-TR (MSOP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC5216-3.3YMM-TR (MSOP-8)?

Manufactured by MICROCHIP, the MIC5216-3.3YMM-TR is housed in a MSOP-8 package with 8 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 2.5V to 12V. Key pins include: 1 (EN: System Enable & Hardware Reset (EN)), 2 (IN: Multiplexed I/O & Peripheral Pin IN (General)), 3 (OUT: Multiplexed I/O & Peripheral Pin OUT (General)), 4 (FLG: Multiplexed I/O & Peripheral Pin FLG (General)), 5 (GND: Ground Reference Pin (GND)), 6 (GND: Ground Reference Pin (GND)).

What are the IPC-7351B PCB Footprint dimensions for MIC5216-3.3YMM-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC5216-3.3YMM-TR (MSOP-8) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC5216-3.3YMM-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC5216-3.3YMM-TR (MICROCHIP, MSOP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & MIC5216 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1ENDigital_IOChip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
2INDigital_IOSignal terminal IN (I/O, 2.5V to 12V domain). Multiplexed alternate functions: IN. Supported peripheral buses: General.
3OUTDigital_IOSignal terminal OUT (I/O, 2.5V to 12V domain). Multiplexed alternate functions: OUT. Supported peripheral buses: General.
4FLGDigital_IOSignal terminal FLG (I/O, 2.5V to 12V domain). Multiplexed alternate functions: FLG. Supported peripheral buses: General.
5GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
6GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
7GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
8GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.