MIC5200-5.0YM-TR (SOIC-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC5200-5.0YM-TR

MICROCHIPSOIC-8 · 8 Pins · Pitch 1.27mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC5200-5.0YM-TR (SOIC-8)1OUT2OUT3NC4GND8IN7IN6NC5ENGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.90mm · Pitch e=1.27mmD=4.90mm-5-4-3-2-101234543210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.90mm × 4.90mm · Pitch: 1.27mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1OUTI/OMultiplexed I/O & Peripheral Pin OUT (General)
2OUTI/OMultiplexed I/O & Peripheral Pin OUT (General)
3NCI/OMultiplexed I/O & Peripheral Pin NC (General)
4GNDGNDGround Reference Pin (GND)
5ENISystem Enable & Hardware Reset (EN)
6NCI/OMultiplexed I/O & Peripheral Pin NC (General)
7INI/OMultiplexed I/O & Peripheral Pin IN (General)
8INI/OMultiplexed I/O & Peripheral Pin IN (General)
PIN 1 OUT
I/O
Multiplexed I/O & Peripheral Pin OUT (General)
Design note: Signal terminal OUT (I/O, 1V to 26V domain). Multiplexed alternate functions: OUT. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 11 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC5200-5.0YM-TR (SOIC-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC5200-5.0YM-TR (SOIC-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC5200-5.0YM-TR (SOIC-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC5200-5.0YM-TR (SOIC-8) - 4. Package Dimensions (D×E×A)
SOIC-8 · 3.90×4.90mm · Pitch 1.27mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC5200-5.0YM-TR (SOIC-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC5200-5.0YM-TR (SOIC-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (11 figures · Page 1/1)
Showing 1–11 of 11 uncropped original figures for MIC5200
P13 · p13_fig01EXACT PACKAGE
MIC5200-5.0YM-TR (SOIC-8) — MIC5200
MIC5200
P16 · p16_fig01EXACT PACKAGE
MIC5200-5.0YM-TR (SOIC-8) — Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
P1 · p01_fig01376×200px
MIC5200-5.0YM-TR (SOIC-8) — 100 mA Low-Dropout Regulator
100 mA Low-Dropout Regulator
P1 · p01_fig02981×390px
MIC5200-5.0YM-TR (SOIC-8) — Typical Application Schematic | MIC5200-3.3 | ENABLE | OUTPUT | 1μF
Typical Application Schematic | MIC5200-3.3 | ENABLE | OUTPUT | 1μF
P1 · p01_fig02P1
MIC5200-5.0YM-TR (SOIC-8) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P10 · p10_fig01611×684px
MIC5200-5.0YM-TR (SOIC-8) — The descriptions of the pins are listed in Table 3-1.
The descriptions of the pins are listed in Table 3-1.
P13 · p13_fig021359×816px
MIC5200-5.0YM-TR (SOIC-8) — ●, ▲, ▼Pin one index is identified by a dot, delta up, or delta down (triangle mark). | Underbar (_) symbol may not be to scale. | 3 e | 3 e
●, ▲, ▼Pin one index is identified by a dot, delta up, or delta down (triangle mark). | Underbar (_) symbol may not be to scale. | 3 e | 3 e
P13 · p13_fig01P13
MIC5200-5.0YM-TR (SOIC-8) — Datasheet Page 13 (p13_fig01)
Datasheet Page 13 (p13_fig01)
P16 · p16_fig01P16
MIC5200-5.0YM-TR (SOIC-8) — Datasheet Page 16 (p16_fig01)
Datasheet Page 16 (p16_fig01)
P14 · p14_fig01All Packages in PDF
MIC5200-5.0YM-TR (SOIC-8) — Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
P15 · p15_fig01All Packages in PDF
MIC5200-5.0YM-TR (SOIC-8) — 8-Lead MSOP Package Outline and Recommended Land Pattern
8-Lead MSOP Package Outline and Recommended Land Pattern

Technical Specifications & Part Details (MIC5200-5.0YM-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC5200-5.0YM-TR (SOIC-8) is a 8-pin standard electronic & interconnect component featuring a 4.90 × 3.90 × 1.75 mm mechanical envelope (lead pitch e = 1.27 mm). Rated for 1V to 26V supply operation across 40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1V to 26V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.90 × 3.90 × 1.75 mm (A1=0.15 mm)
Package family: SOIC (SOIC-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 1.27 mm (50.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 1.27mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SOIC-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.90 × 3.90 mm
Height (A) & Pitch (e)IPC-7351B
A=1.75mm · e=1.27mm
Pad Size (W × L)Level B
0.60 × 1.55 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOIC-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC5200-5.0YM-TR (SOIC-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC5200-5.0YM-TR (SOIC-8)?

Manufactured by MICROCHIP, the MIC5200-5.0YM-TR is housed in a SOIC-8 package with 8 pins and a 1.27 mm lead pitch, supporting a VCC supply range of 1V to 26V. Key pins include: 1 (OUT: Multiplexed I/O & Peripheral Pin OUT (General)), 2 (OUT: Multiplexed I/O & Peripheral Pin OUT (General)), 3 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 4 (GND: Ground Reference Pin (GND)), 5 (EN: System Enable & Hardware Reset (EN)), 6 (NC: Multiplexed I/O & Peripheral Pin NC (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC5200-5.0YM-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC5200-5.0YM-TR (SOIC-8) has a nominal body envelope of 3.90 × 4.90 mm, pitch e = 1.27 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC5200-5.0YM-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC5200-5.0YM-TR (MICROCHIP, SOIC-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & MIC5200 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1OUTDigital_IOSignal terminal OUT (I/O, 1V to 26V domain). Multiplexed alternate functions: OUT. Supported peripheral buses: General.
2OUTDigital_IOSignal terminal OUT (I/O, 1V to 26V domain). Multiplexed alternate functions: OUT. Supported peripheral buses: General.
3NCNCSignal terminal NC (I/O, 1V to 26V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5ENDigital_IOChip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
6NCNCSignal terminal NC (I/O, 1V to 26V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
7INDigital_IOSignal terminal IN (I/O, 1V to 26V domain). Multiplexed alternate functions: IN. Supported peripheral buses: General.
8INDigital_IOSignal terminal IN (I/O, 1V to 26V domain). Multiplexed alternate functions: IN. Supported peripheral buses: General.