MIC38C45YMM-TR (MSOP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC38C45YMM-TR

MICROCHIPMSOP-8 · 8 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC38C45YMM-TR (MSOP-8)1COMP2FB3ISNS4RT/CT8VREF7VDD6OUT5GNDGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.00mm · Pitch e=0.65mmD=3.00mm-5-4-3-2-10123453210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1COMPI/OMultiplexed I/O & Peripheral Pin COMP (General)
2FBI/OMultiplexed I/O & Peripheral Pin FB (General)
3ISNSI/OMultiplexed I/O & Peripheral Pin ISNS (General)
4RT/CTI/OMultiplexed I/O & Peripheral Pin RT/CT (General)
5GNDGNDGround Reference Pin (GND)
6OUTI/OMultiplexed I/O & Peripheral Pin OUT (General)
7VDDPowerPower Supply Input (VDD — 3.3V / 5.0V Standard Logic)
8VREFAnalogMultiplexed I/O & Peripheral Pin VREF (General)
PIN 1 COMP
I/O
Multiplexed I/O & Peripheral Pin COMP (General)
Design note: Compensation: Connect external compensation network to modify the error amplifier output.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 11 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC38C45YMM-TR (MSOP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC38C45YMM-TR (MSOP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC38C45YMM-TR (MSOP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC38C45YMM-TR (MSOP-8) - 4. Package Dimensions (D×E×A)
MSOP-8 · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC38C45YMM-TR (MSOP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC38C45YMM-TR (MSOP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (11 figures · Page 1/1)
Showing 1–11 of 11 uncropped original figures for MIC38C45YMM
P1 · p01_fig01376×200px
MIC38C45YMM-TR (MSOP-8) — BiCMOS Current-Mode PWM Controllers
BiCMOS Current-Mode PWM Controllers
P1 · p01_fig02P1
MIC38C45YMM-TR (MSOP-8) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P11 · p11_fig021362×815px
MIC38C45YMM-TR (MSOP-8) — ●, ▲, ▼Pin one index is identified by a dot, delta up, or delta down (triangle mark). | Underbar (_) and/or Overbar (‾) symbol may not be to scale. | 3 e | 3 e
●, ▲, ▼Pin one index is identified by a dot, delta up, or delta down (triangle mark). | Underbar (_) and/or Overbar (‾) symbol may not be to scale. | 3 e | 3 e
P11 · p11_fig02P11
MIC38C45YMM-TR (MSOP-8) — Datasheet Page 11 (p11_fig02)
Datasheet Page 11 (p11_fig02)
P13 · p13_fig011665×1760px
MIC38C45YMM-TR (MSOP-8) — 8-Lead MSOP Package Outline and Recommended Land Pattern
8-Lead MSOP Package Outline and Recommended Land Pattern
P13 · p13_fig01P13
MIC38C45YMM-TR (MSOP-8) — Datasheet Page 13 (p13_fig01)
Datasheet Page 13 (p13_fig01)
P1 · p01_fig02All Packages in PDF
MIC38C45YMM-TR (MSOP-8) — For fast rise and fall times and higher output drive, refer to the MIC38HC4x.
For fast rise and fall times and higher output drive, refer to the MIC38HC4x.
P2 · p02_fig01All Packages in PDF
MIC38C45YMM-TR (MSOP-8) — Functional Block Diagram
Functional Block Diagram
P11 · p11_fig01All Packages in PDF
MIC38C45YMM-TR (MSOP-8) — MIC38C42/43/44/45
MIC38C42/43/44/45
P12 · p12_fig01All Packages in PDF
MIC38C45YMM-TR (MSOP-8) — Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
P14 · p14_fig01All Packages in PDF
MIC38C45YMM-TR (MSOP-8) — 8-Lead DIP Package Outline and Recommended Land Pattern
8-Lead DIP Package Outline and Recommended Land Pattern

Technical Specifications & Part Details (MIC38C45YMM-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC38C45YMM-TR (MSOP-8) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.10 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across 40°C to +85°C with integrated PWM interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
500 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.10 mm (A1=0.08 mm)
Package family: TSSOP (MSOP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (MSOP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.65mm
Pad Size (W × L)Level B
0.40 × 1.25 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MSOP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC38C45YMM-TR (MSOP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC38C45YMM-TR (MSOP-8)?

Manufactured by MICROCHIP, the MIC38C45YMM-TR is housed in a MSOP-8 package with 8 pins and a 0.65 mm lead pitch. Key pins include: 1 (COMP: Multiplexed I/O & Peripheral Pin COMP (General)), 2 (FB: Multiplexed I/O & Peripheral Pin FB (General)), 3 (ISNS: Multiplexed I/O & Peripheral Pin ISNS (General)), 4 (RT/CT: Multiplexed I/O & Peripheral Pin RT/CT (General)), 5 (GND: Ground Reference Pin (GND)), 6 (OUT: Multiplexed I/O & Peripheral Pin OUT (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC38C45YMM-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC38C45YMM-TR (MSOP-8) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC38C45YMM-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC38C45YMM-TR (MICROCHIP, MSOP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & MIC38C45YMM Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1COMPDigital_IOSignal terminal COMP (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: COMP. Supported peripheral buses: General.
2FBDigital_IOSignal terminal FB (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: FB. Supported peripheral buses: General.
3ISNSDigital_IOSignal terminal ISNS (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: ISNS. Supported peripheral buses: General.
4RT/CTDigital_IOSignal terminal RT/CT (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RT/CT. Supported peripheral buses: General.
5GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
6OUTDigital_IOSignal terminal OUT (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: OUT. Supported peripheral buses: General.
7VDDPower_InPrimary positive power supply input (VDD) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
8VREFAnalogSignal terminal VREF (Analog, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VREF. Supported peripheral buses: General.