MIC2583-LYQS-TR (QSOP-16-150mil) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC2583-LYQS-TR

MICROCHIPQSOP-16-150mil · 16 Pins · Pitch 0.64mmIPC TOLERANCE VARIATION5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC2583-LYQS-TR (QSOP-16-150mil)1/POR2PWRGD3ON4CPOR5C FILTER6NC7GND8GND16V CC15SENSE14GATE13DIS12FB11/FAULT10NC9NCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.815.210.25.10-5.1-10.2-15.2mm
2. 2D FOOTPRINT
12345678910111213141516E=3.90mm · Pitch e=0.64mmD=4.90mm-5-4-3-2-101234543210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.90mm × 4.90mm · Pitch: 0.64mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (16/16)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1/PORI/OMultiplexed I/O & Peripheral Pin /POR (General)
2PWRGDI/OMultiplexed I/O & Peripheral Pin PWRGD (General)
3ONI/OMultiplexed I/O & Peripheral Pin ON (General)
4CPORI/OMultiplexed I/O & Peripheral Pin CPOR (General)
5C FILTERI/OMultiplexed I/O & Peripheral Pin C FILTER (General)
6NCI/OMultiplexed I/O & Peripheral Pin NC (General)
7GNDGNDGround Reference Pin (GND)
8GNDGNDGround Reference Pin (GND)
9NCI/OMultiplexed I/O & Peripheral Pin NC (General)
10NCI/OMultiplexed I/O & Peripheral Pin NC (General)
11/FAULTI/OMultiplexed I/O & Peripheral Pin /FAULT (General)
12FBI/OMultiplexed I/O & Peripheral Pin FB (General)
13DISI/OMultiplexed I/O & Peripheral Pin DIS (General)
14GATEI/OMultiplexed I/O & Peripheral Pin GATE (General)
15SENSEI/OMultiplexed I/O & Peripheral Pin SENSE (General)
16V CCI/OMultiplexed I/O & Peripheral Pin V CC (General)
PIN 1 /POR
I/O
Multiplexed I/O & Peripheral Pin /POR (General)
Design note: Power-on-Reset output: Open-drain N-channel device, active-low. This pin remains asserted during start-up until a time period (t ) POR after the FB pin voltage rises above the power good threshold (V ). The timing capacitor C determines t .
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 13 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC2583-LYQS-TR (QSOP-16-150mil) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC2583-LYQS-TR (QSOP-16-150mil) - 2. Standard Pinout (Top View)
True package pinout (16 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC2583-LYQS-TR (QSOP-16-150mil) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC2583-LYQS-TR (QSOP-16-150mil) - 4. Package Dimensions (D×E×A)
QSOP-16-150mil · 3.90×4.90mm · Pitch 0.64mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC2583-LYQS-TR (QSOP-16-150mil) - 5. Recommended Land Pattern
IPC-7351B Footprint (16 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC2583-LYQS-TR (QSOP-16-150mil) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (13 figures · Page 1/2)
Showing 1–12 of 13 uncropped original figures for MIC2583
P1 · p01_fig01376×200px
MIC2583-LYQS-TR (QSOP-16-150mil) — Single-Channel Hot Swap Controllers
Single-Channel Hot Swap Controllers
P2 · p02_fig011516×609px
MIC2583-LYQS-TR (QSOP-16-150mil) — Typical Application Circuit
Typical Application Circuit
P2 · p02_fig021543×1082px
MIC2583-LYQS-TR (QSOP-16-150mil) — Functional Block Diagram
Functional Block Diagram
P2 · p02_fig01P2
MIC2583-LYQS-TR (QSOP-16-150mil) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P16 · p16_fig01867×465px
MIC2583-LYQS-TR (QSOP-16-150mil) — EQUATION 5-3: | Substituting these values into Equation 5-3 now yields R5 = 93.33 kΩ. A standard 93.1 kΩ ±1% is selected. | R5 R6 VOUT GOOD   VFB MAX   ---------------------------------       1 -  = | Where: VFB(MAX) = 1.29V VOUT
EQUATION 5-3: | Substituting these values into Equation 5-3 now yields R5 = 93.33 kΩ. A standard 93.1 kΩ ±1% is selected. | R5 R6 VOUT GOOD   VFB MAX   ---------------------------------       1 -  = | Where: VFB(MAX) = 1.29V VOUT
P16 · p16_fig021323×682px
MIC2583-LYQS-TR (QSOP-16-150mil) — FIGURE 5-1: PCB Connection Sense with ON/OFF Control.
FIGURE 5-1: PCB Connection Sense with ON/OFF Control.
P22 · p22_fig01998×852px
MIC2583-LYQS-TR (QSOP-16-150mil) — FIGURE 5-6: Recommended PCB Layout for Sense Resistor, Power MOSFET, and Feedback Network.
FIGURE 5-6: Recommended PCB Layout for Sense Resistor, Power MOSFET, and Feedback Network.
P24 · p24_fig021359×815px
MIC2583-LYQS-TR (QSOP-16-150mil) — ●, ▲, ▼Pin one index is identified by a dot, delta up, or delta down (triangle mark). | Underbar (_) and/or Overbar (‾) symbol may not be to scale. | 3 e | 3 e
●, ▲, ▼Pin one index is identified by a dot, delta up, or delta down (triangle mark). | Underbar (_) and/or Overbar (‾) symbol may not be to scale. | 3 e | 3 e
P24 · p24_fig02P24
MIC2583-LYQS-TR (QSOP-16-150mil) — Datasheet Page 24 (p24_fig02)
Datasheet Page 24 (p24_fig02)
P26 · p26_fig011616×1503px
MIC2583-LYQS-TR (QSOP-16-150mil) — 16-Lead QSOP Package Outline and Recommended Land Pattern
16-Lead QSOP Package Outline and Recommended Land Pattern
P26 · p26_fig01P26
MIC2583-LYQS-TR (QSOP-16-150mil) — Datasheet Page 26 (p26_fig01)
Datasheet Page 26 (p26_fig01)
P24 · p24_fig01All Packages in PDF
MIC2583-LYQS-TR (QSOP-16-150mil) — MIC2582/3 MIC2582 MIC2583 | 6.0 PACKAGING INFORMATION | 6.1 Package Marking Information | Example 8-Lead SOIC* | XXXX -XXX WNNN | 2582 -MYM 9711 | Example 16-Lead QSOP* | XXXX -XXXX WNNN | 2583 -LYQS 9676
MIC2582/3 MIC2582 MIC2583 | 6.0 PACKAGING INFORMATION | 6.1 Package Marking Information | Example 8-Lead SOIC* | XXXX -XXX WNNN | 2582 -MYM 9711 | Example 16-Lead QSOP* | XXXX -XXXX WNNN | 2583 -LYQS 9676
Page 1 / 2 (13 extracted figures)

Technical Specifications & Part Details (MIC2583-LYQS-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC2583-LYQS-TR (QSOP-16-150mil) is a 16-pin standard electronic & interconnect component featuring a 4.90 × 3.90 × 1.10 mm mechanical envelope (lead pitch e = 0.64 mm). Rated for 2.3V to 13.2V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
2.3V to 13.2V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.90 × 3.90 × 1.10 mm (A1=0.10 mm)
Package family: TSSOP (QSOP-16-150mil)
Pin Count & Lead PitchN / e
16 Pins | Pitch e = 0.64 mm (25.0 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol16 auto-grouped pins
OK
IPC-7351B Land Pattern16 pads · Pitch 0.64mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (QSOP-16-150mil)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.90 × 3.90 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.64mm
Pad Size (W × L)Level B
0.38 × 1.50 mm
Pins / Total PadsTopology
16P / 16Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QSOP-16-150mil
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC2583-LYQS-TR (QSOP-16-150mil)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC2583-LYQS-TR (QSOP-16-150mil)?

Manufactured by MICROCHIP, the MIC2583-LYQS-TR is housed in a QSOP-16-150mil package with 16 pins and a 0.64 mm lead pitch, supporting a VCC supply range of 2.3V to 13.2V. Key pins include: 1 (/POR: Multiplexed I/O & Peripheral Pin /POR (General)), 2 (PWRGD: Multiplexed I/O & Peripheral Pin PWRGD (General)), 3 (ON: Multiplexed I/O & Peripheral Pin ON (General)), 4 (CPOR: Multiplexed I/O & Peripheral Pin CPOR (General)), 5 (C FILTER: Multiplexed I/O & Peripheral Pin C FILTER (General)), 6 (NC: Multiplexed I/O & Peripheral Pin NC (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC2583-LYQS-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC2583-LYQS-TR (QSOP-16-150mil) has a nominal body envelope of 3.90 × 4.90 mm, pitch e = 0.64 mm, and 16 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC2583-LYQS-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC2583-LYQS-TR (MICROCHIP, QSOP-16-150mil) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (16 pins) & MIC2583 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1/POROpen_DrainSignal terminal /POR (I/O, 2.3V to 13.2V domain). Multiplexed alternate functions: /POR. Supported peripheral buses: General.
2PWRGDOpen_DrainSignal terminal PWRGD (I/O, 2.3V to 13.2V domain). Multiplexed alternate functions: PWRGD. Supported peripheral buses: General.
3ONDigital_IOSignal terminal ON (I/O, 2.3V to 13.2V domain). Multiplexed alternate functions: ON. Supported peripheral buses: General.
4CPORDigital_IOSignal terminal CPOR (I/O, 2.3V to 13.2V domain). Multiplexed alternate functions: CPOR. Supported peripheral buses: General.
5C FILTERDigital_IOSignal terminal C FILTER (I/O, 2.3V to 13.2V domain). Multiplexed alternate functions: C FILTER. Supported peripheral buses: General.
6NCNCSignal terminal NC (I/O, 2.3V to 13.2V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
7GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
8GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
9NCNCSignal terminal NC (I/O, 2.3V to 13.2V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
10NCNCSignal terminal NC (I/O, 2.3V to 13.2V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
11/FAULTOpen_DrainSignal terminal /FAULT (I/O, 2.3V to 13.2V domain). Multiplexed alternate functions: /FAULT. Supported peripheral buses: General.
12FBDigital_IOSignal terminal FB (I/O, 2.3V to 13.2V domain). Multiplexed alternate functions: FB. Supported peripheral buses: General.
13DISDigital_IOSignal terminal DIS (I/O, 2.3V to 13.2V domain). Multiplexed alternate functions: DIS. Supported peripheral buses: General.
14GATEDigital_IOSignal terminal GATE (I/O, 2.3V to 13.2V domain). Multiplexed alternate functions: GATE. Supported peripheral buses: General.
15SENSEDigital_IOSignal terminal SENSE (I/O, 2.3V to 13.2V domain). Multiplexed alternate functions: SENSE. Supported peripheral buses: General.
16V CCDigital_IOSignal terminal V CC (I/O, 2.3V to 13.2V domain). Multiplexed alternate functions: V CC. Supported peripheral buses: General.