MCP48FEB11T-E/UN (MSOP-10) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP48FEB11T-E/UN

MICROCHIPMSOP-10 · 10 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP48FEB11T-E/UN (MSOP-10)1VDD2CS3VREF4V OUT05V OUT110SDI9SCK8SDO7VSS6LAT0/HVCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
12345678910E=3.00mm · Pitch e=0.50mmD=3.00mm-5-4-3-2-10123453210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (10/10)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VDDPowerPower Supply Input (VDD — 2.7V to 5.5V)
2CSI/OMultiplexed I/O & Peripheral Pin CS (SPI)
3VREFI/OMultiplexed I/O & Peripheral Pin VREF (DAC)
4V OUT0I/OMultiplexed I/O & Peripheral Pin V OUT0 (General)
5V OUT1I/OMultiplexed I/O & Peripheral Pin V OUT1 (General)
6LAT0/HVCI/OMultiplexed I/O & Peripheral Pin LAT0/HVC (DAC)
7VSSGNDGround Reference Pin (VSS)
8SDOI/OMultiplexed I/O & Peripheral Pin SDO (SPI)
9SCKI/OMultiplexed I/O & Peripheral Pin SCK (SPI)
10SDII/OMultiplexed I/O & Peripheral Pin SDI (SPI)
PIN 1 VDD
Power
Power Supply Input (VDD — 2.7V to 5.5V)
Design note: Supply Voltage Pin
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 9 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP48FEB11T-E/UN (MSOP-10) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP48FEB11T-E/UN (MSOP-10) - 2. Standard Pinout (Top View)
True package pinout (10 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP48FEB11T-E/UN (MSOP-10) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP48FEB11T-E/UN (MSOP-10) - 4. Package Dimensions (D×E×A)
MSOP-10 · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP48FEB11T-E/UN (MSOP-10) - 5. Recommended Land Pattern
IPC-7351B Footprint (10 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP48FEB11T-E/UN (MSOP-10) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (9 figures · Page 1/1)
Showing 1–9 of 9 uncropped original figures for MCP48FEB11T / MCP48FEB12T
P1 · p01_fig011777×1381px
MCP48FEB11T-E/UN (MSOP-10) — MCP48FEBXX | Features | Package Types | General Description | The MCP48FEBXX are Single- and Dual-channel 8-bit, 10-bit, and 12-bit buffered voltage output Digital-to-Analog Converters (DAC) with nonvolatile memory and an SPI serial interfa
MCP48FEBXX | Features | Package Types | General Description | The MCP48FEBXX are Single- and Dual-channel 8-bit, 10-bit, and 12-bit buffered voltage output Digital-to-Analog Converters (DAC) with nonvolatile memory and an SPI serial interfa
P1 · p01_fig02377×200px
MCP48FEB11T-E/UN (MSOP-10) — 8-/10-/12-Bit Single/Dual Voltage Output Nonvolatile
8-/10-/12-Bit Single/Dual Voltage Output Nonvolatile
P2 · p02_fig011646×1050px
MCP48FEB11T-E/UN (MSOP-10) — MCP48FEBX1 Device Block Diagram (Single-Channel Output) | Power-up/ Brown-out Control | VDD | VSS | SPI Serial Interface Module | Memory (32x16) | DAC0 (Vol and NV) | VREF0 | Op Amp | Gain | VOUT0 | LAT0/HVC | Resistor Ladder | VSS | PD1:PD
MCP48FEBX1 Device Block Diagram (Single-Channel Output) | Power-up/ Brown-out Control | VDD | VSS | SPI Serial Interface Module | Memory (32x16) | DAC0 (Vol and NV) | VREF0 | Op Amp | Gain | VOUT0 | LAT0/HVC | Resistor Ladder | VSS | PD1:PD
P69 · p69_fig011779×1847px
MCP48FEB11T-E/UN (MSOP-10) — FIGURE 8-1: Bypass Filtering Example Circuit.
FIGURE 8-1: Bypass Filtering Example Circuit.
P75 · p75_fig011781×1119px
MCP48FEB11T-E/UN (MSOP-10) — FIGURE 8-8: Typical Microcontroller Connections.
FIGURE 8-8: Typical Microcontroller Connections.
P75 · p75_fig01P75
MCP48FEB11T-E/UN (MSOP-10) — Datasheet Page 75 (p75_fig01)
Datasheet Page 75 (p75_fig01)
P79 · p79_fig011290×987px
MCP48FEB11T-E/UN (MSOP-10) — 10.1 Package Marking Information
10.1 Package Marking Information
P79 · p79_fig021777×725px
MCP48FEB11T-E/UN (MSOP-10) —  2015 Microchip Technology Inc. DS20005429B-page 79 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-s
 2015 Microchip Technology Inc. DS20005429B-page 79 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-s
P79 · p79_fig01P79
MCP48FEB11T-E/UN (MSOP-10) — Datasheet Page 79 (p79_fig01)
Datasheet Page 79 (p79_fig01)

Technical Specifications & Part Details (MCP48FEB11T-E/UN)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP48FEB11T-E/UN (MSOP-10) is a 10-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.10 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2.7V to 5.5V supply operation across -40°C to +125°C with integrated SPI, DAC interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.10 mm (A1=0.08 mm)
Package family: TSSOP (MSOP-10)
Pin Count & Lead PitchN / e
10 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI, DAC
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol10 auto-grouped pins
OK
IPC-7351B Land Pattern10 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MCP48FEB11T / MCP48FEB12T (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (MSOP-10)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 1.25 mm
Pins / Total PadsTopology
10P / 10Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MSOP-10
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP48FEB11T-E/UN (MSOP-10)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP48FEB11T-E/UN (MSOP-10)?

Manufactured by MICROCHIP, the MCP48FEB11T-E/UN is housed in a MSOP-10 package with 10 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.7V to 5.5V. Key pins include: 1 (VDD: Power Supply Input (VDD — 2.7V to 5.5V)), 2 (CS: Multiplexed I/O & Peripheral Pin CS (SPI)), 3 (VREF: Multiplexed I/O & Peripheral Pin VREF (DAC)), 4 (V OUT0: Multiplexed I/O & Peripheral Pin V OUT0 (General)), 5 (V OUT1: Multiplexed I/O & Peripheral Pin V OUT1 (General)), 6 (LAT0/HVC: Multiplexed I/O & Peripheral Pin LAT0/HVC (DAC)).

What are the IPC-7351B PCB Footprint dimensions for MCP48FEB11T-E/UN?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP48FEB11T-E/UN (MSOP-10) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 10 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP48FEB11T-E/UN?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP48FEB11T-E/UN (MICROCHIP, MSOP-10) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (10 pins) & MCP48FEB11T / MCP48FEB12T Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VDDPower_InPrimary positive power supply input (VDD) operating in the 2.7V to 5.5V domain (Max rating: 5.5V).
2CSDigital_IOSignal terminal CS (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SPI_CHIP. Supported peripheral buses: SPI.
3VREFAnalogSignal terminal VREF (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: VREF. Supported peripheral buses: DAC.
4V OUT0Digital_IOSignal terminal V OUT0 (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: V OUT0. Supported peripheral buses: General.
5V OUT1Digital_IOSignal terminal V OUT1 (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: V OUT1. Supported peripheral buses: General.
6LAT0/HVCDigital_IOSignal terminal LAT0/HVC (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: LAT0/HVC. Supported peripheral buses: DAC.
7VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
8SDODigital_IOSignal terminal SDO (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SPI_SERIAL. Supported peripheral buses: SPI.
9SCKDigital_IOSignal terminal SCK (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SPI_SERIAL. Supported peripheral buses: SPI.
10SDIDigital_IOSignal terminal SDI (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SPI_SERIAL. Supported peripheral buses: SPI.