MCP4562T-502E/MS (MSOP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP4562T-502E/MS

MICROCHIPMSOP-8 · 8 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP4562T-502E/MS (MSOP-8)1HVC/A02SCL3SDA4VSS8VDD7A16P0B5P0WGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.00mm · Pitch e=0.65mmD=3.00mm-5-4-3-2-10123453210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1HVC/A0I/OMultiplexed I/O & Peripheral Pin HVC/A0 (General)
2SCLI/OMultiplexed I/O & Peripheral Pin SCL (I2C)
3SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
4VSSGNDGround Reference Pin (VSS)
5P0WI/OMultiplexed I/O & Peripheral Pin P0W (General)
6P0BI/OMultiplexed I/O & Peripheral Pin P0B (General)
7A1I/OMultiplexed I/O & Peripheral Pin A1 (General)
8VDDPowerPower Supply Input (VDD — 2.7V to 5.5V)
PIN 1 HVC/A0
I/O
Multiplexed I/O & Peripheral Pin HVC/A0 (General)
Design note: High Voltage Command / Address 0
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 13 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP4562T-502E/MS (MSOP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP4562T-502E/MS (MSOP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP4562T-502E/MS (MSOP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP4562T-502E/MS (MSOP-8) - 4. Package Dimensions (D×E×A)
MSOP-8 · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP4562T-502E/MS (MSOP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP4562T-502E/MS (MSOP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (13 figures · Page 1/2)
Showing 1–12 of 13 uncropped original figures for MCP4562 / MCP4652
P1 · p01_fig01377×200px
MCP4562T-502E/MS (MSOP-8) — 7/8-Bit Single/Dual I2C Digital POT with
7/8-Bit Single/Dual I2C Digital POT with
P1 · p01_fig02866×1646px
MCP4562T-502E/MS (MSOP-8) —  2008-2013 Microchip Technology Inc. DS22096B-page 1
 2008-2013 Microchip Technology Inc. DS22096B-page 1
P2 · p02_fig011636×1523px
MCP4562T-502E/MS (MSOP-8) — MCP4531 1 Potentiometer(1) I2C RAM No Mid-Scale 5.0, 10.0, 50.0, 100.0 75 129 1.8V to 5.5V
MCP4531 1 Potentiometer(1) I2C RAM No Mid-Scale 5.0, 10.0, 50.0, 100.0 75 129 1.8V to 5.5V
P2 · p02_fig021778×1268px
MCP4562T-502E/MS (MSOP-8) — DS22096B-page 2  2008-2013 Microchip Technology Inc.
DS22096B-page 2  2008-2013 Microchip Technology Inc.
P62 · p62_fig011785×594px
MCP4562T-502E/MS (MSOP-8) — FIGURE 8-4: Software Reset Sequence Format.
FIGURE 8-4: Software Reset Sequence Format.
P62 · p62_fig021780×1378px
MCP4562T-502E/MS (MSOP-8) — FIGURE 8-4: Software Reset Sequence Format.
FIGURE 8-4: Software Reset Sequence Format.
P63 · p63_fig011781×1253px
MCP4562T-502E/MS (MSOP-8) — FIGURE 8-5: Typical Application I2C Bus Configurations.
FIGURE 8-5: Typical Application I2C Bus Configurations.
P66 · p66_fig011727×1131px
MCP4562T-502E/MS (MSOP-8) — FIGURE 8-8: Typical Microcontroller Connections.
FIGURE 8-8: Typical Microcontroller Connections.
P71 · p71_fig011778×1483px
MCP4562T-502E/MS (MSOP-8) — MCP453X/455X/463X/465X | 11.0 PACKAGING INFORMATION | 11.1 Package Marking Information | 8-Lead DFN (3x3) Example: Part Number Code Part Number Code | MCP4531-502E/MF DACA MCP4532-502E/MF DACE | MCP4531-103E/MF DACB MCP4532-103E/MF DACF | M
MCP453X/455X/463X/465X | 11.0 PACKAGING INFORMATION | 11.1 Package Marking Information | 8-Lead DFN (3x3) Example: Part Number Code Part Number Code | MCP4531-502E/MF DACA MCP4532-502E/MF DACE | MCP4531-103E/MF DACB MCP4532-103E/MF DACF | M
P71 · p71_fig021777×755px
MCP4562T-502E/MS (MSOP-8) —  2008-2013 Microchip Technology Inc. DS22096B-page 71 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer
 2008-2013 Microchip Technology Inc. DS22096B-page 71 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer
P71 · p71_fig01P71
MCP4562T-502E/MS (MSOP-8) — Datasheet Page 71 (p71_fig01)
Datasheet Page 71 (p71_fig01)
P97 · p97_fig011778×919px
MCP4562T-502E/MS (MSOP-8) — Variation
Variation
Page 1 / 2 (13 extracted figures)

Technical Specifications & Part Details (MCP4562T-502E/MS)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP4562T-502E/MS (MSOP-8) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 1.10 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 2.7V to 5.5V supply operation across 0°C to 70°C with integrated I2C interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
0°C to 70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 1.10 mm (A1=0.08 mm)
Package family: TSSOP (MSOP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MCP4562 / MCP4652 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (MSOP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.65mm
Pad Size (W × L)Level B
0.40 × 1.25 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MSOP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP4562T-502E/MS (MSOP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP4562T-502E/MS (MSOP-8)?

Manufactured by MICROCHIP, the MCP4562T-502E/MS is housed in a MSOP-8 package with 8 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 2.7V to 5.5V. Key pins include: 1 (HVC/A0: Multiplexed I/O & Peripheral Pin HVC/A0 (General)), 2 (SCL: Multiplexed I/O & Peripheral Pin SCL (I2C)), 3 (SDA: Multiplexed I/O & Peripheral Pin SDA (I2C)), 4 (VSS: Ground Reference Pin (VSS)), 5 (P0W: Multiplexed I/O & Peripheral Pin P0W (General)), 6 (P0B: Multiplexed I/O & Peripheral Pin P0B (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP4562T-502E/MS?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP4562T-502E/MS (MSOP-8) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP4562T-502E/MS?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP4562T-502E/MS (MICROCHIP, MSOP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & MCP4562 / MCP4652 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1HVC/A0Digital_IOSignal terminal HVC/A0 (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: HVC/A0. Supported peripheral buses: General.
2SCLDigital_IOSignal terminal SCL (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SCL. Supported peripheral buses: I2C.
3SDADigital_IOSignal terminal SDA (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SDA. Supported peripheral buses: I2C.
4VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
5P0WDigital_IOSignal terminal P0W (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: P0W. Supported peripheral buses: General.
6P0BDigital_IOSignal terminal P0B (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: P0B. Supported peripheral buses: General.
7A1Digital_IOSignal terminal A1 (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: A1. Supported peripheral buses: General.
8VDDPower_InPrimary positive power supply input (VDD) operating in the 2.7V to 5.5V domain (Max rating: 5.5V).