MIC810JYC3-TR (SC-70-3) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC810JYC3-TR

MICROCHIPSC-70-3 · 3 Pins · Pitch 1.30mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC810JYC3-TR (SC-70-3)1GND2/RESET3VCCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
123E=2.00mm · Pitch e=1.30mmD=1.25mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 2.00mm × 1.25mm · Pitch: 1.30mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (3/3)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1GNDGNDGround Reference Pin (GND)
2/RESETISystem Enable & Hardware Reset (/RESET)
3VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
PIN 1 GND
GND
Ground Reference Pin (GND)
Design note: IC Ground Pin.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 11 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC810JYC3-TR (SC-70-3) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC810JYC3-TR (SC-70-3) - 2. Standard Pinout (Top View)
True package pinout (3 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC810JYC3-TR (SC-70-3) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC810JYC3-TR (SC-70-3) - 4. Package Dimensions (D×E×A)
SC-70-3 · 2.00×1.25mm · Pitch 1.30mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC810JYC3-TR (SC-70-3) - 5. Recommended Land Pattern
IPC-7351B Footprint (3 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC810JYC3-TR (SC-70-3) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (11 figures · Page 1/1)
Showing 1–11 of 11 uncropped original figures for MIC810
P1 · p01_fig01376×200px
MIC810JYC3-TR (SC-70-3) — Microprocessor Reset Circuits
Microprocessor Reset Circuits
P2 · p02_fig01657×580px
MIC810JYC3-TR (SC-70-3) — Typical Application Circuit
Typical Application Circuit
P2 · p02_fig021499×663px
MIC810JYC3-TR (SC-70-3) — Functional Block Diagram
Functional Block Diagram
P7 · p07_fig01667×492px
MIC810JYC3-TR (SC-70-3) — FIGURE 3-1: Reset Valid to VCC = 0V.
FIGURE 3-1: Reset Valid to VCC = 0V.
P8 · p08_fig021568×903px
MIC810JYC3-TR (SC-70-3) — SOT-23 Part Number SC-70 Part Number Marking Code Threshold Voltage
SOT-23 Part Number SC-70 Part Number Marking Code Threshold Voltage
P8 · p08_fig02P8
MIC810JYC3-TR (SC-70-3) — Datasheet Page 8 (p08_fig02)
Datasheet Page 8 (p08_fig02)
P1 · p01_fig02All Packages in PDF
MIC810JYC3-TR (SC-70-3) — MIC809 3-Lead SOT-23 (U) 3-Lead SC-70 (C3) (Top View)
MIC809 3-Lead SOT-23 (U) 3-Lead SC-70 (C3) (Top View)
P1 · p01_fig03All Packages in PDF
MIC810JYC3-TR (SC-70-3) — MIC810 3-Lead SOT-23 (U) 3-Lead SC-70 (C3) (Top View)
MIC810 3-Lead SOT-23 (U) 3-Lead SC-70 (C3) (Top View)
P8 · p08_fig01All Packages in PDF
MIC810JYC3-TR (SC-70-3) — MIC809/MIC810
MIC809/MIC810
P9 · p09_fig01All Packages in PDF
MIC810JYC3-TR (SC-70-3) — Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging.
P10 · p10_fig01All Packages in PDF
MIC810JYC3-TR (SC-70-3) — 3-Lead SC-70 Package Outline and Recommended Land Pattern
3-Lead SC-70 Package Outline and Recommended Land Pattern

Technical Specifications & Part Details (MIC810JYC3-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC810JYC3-TR (SC-70-3) is a 3-pin standard electronic & interconnect component featuring a 2.00 × 1.25 × 0.95 mm mechanical envelope (lead pitch e = 1.30 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across 0°C to 70°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
0°C to 70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.00 × 1.25 × 0.95 mm (A1=0.06 mm)
Package family: SOT23 (SC-70-3)
Pin Count & Lead PitchN / e
3 Pins | Pitch e = 1.30 mm (51.2 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol3 auto-grouped pins
OK
IPC-7351B Land Pattern3 pads · Pitch 1.30mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SC-70-3)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.00 × 1.25 mm
Height (A) & Pitch (e)IPC-7351B
A=0.95mm · e=1.30mm
Pad Size (W × L)Level B
0.42 × 0.85 mm
Pins / Total PadsTopology
3P / 3Pad (SOT_SMALL)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SC-70-3
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC810JYC3-TR (SC-70-3)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC810JYC3-TR (SC-70-3)?

Manufactured by MICROCHIP, the MIC810JYC3-TR is housed in a SC-70-3 package with 3 pins and a 1.30 mm lead pitch. Key pins include: 1 (GND: Ground Reference Pin (GND)), 2 (/RESET: System Enable & Hardware Reset (/RESET)), 3 (VCC: Power Supply Input (VCC — 3.3V / 5.0V Standard Logic)).

What are the IPC-7351B PCB Footprint dimensions for MIC810JYC3-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC810JYC3-TR (SC-70-3) has a nominal body envelope of 1.25 × 2.00 mm, pitch e = 1.30 mm, and 3 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC810JYC3-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC810JYC3-TR (MICROCHIP, SC-70-3) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (3 pins) & MIC810 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
2/RESETDigital_IOActive-low hardware reset terminal (/RESET): pulling this pin Low resets the processor core and peripherals.
3VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).