MCP9805T-BE/MC (TDFN-8-EP(2x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP9805T-BE/MC

MICROCHIPTDFN-8-EP(2x3) · 9 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP9805T-BE/MC (TDFN-8-EP(2x3))1A02A13A24GND5SDA9GND8VDD7Event6SCLKGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
987654321E=2.00mm · Pitch e=0.50mmD=3.00mm-3-2-1012343210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 2.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1A0I/OMultiplexed I/O & Peripheral Pin A0 (General)
2A1I/OMultiplexed I/O & Peripheral Pin A1 (General)
3A2I/OMultiplexed I/O & Peripheral Pin A2 (General)
4GNDGNDGround Reference Pin (GND)
5SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
6SCLKI/OMultiplexed I/O & Peripheral Pin SCLK (SPI, I2C)
7EventI/OMultiplexed I/O & Peripheral Pin Event (General)
8VDDPowerPower Supply Input (VDD — 3.0V to 3.6V)
9GNDGNDGround Reference Pin (GND)
PIN 1 A0
I/O
Multiplexed I/O & Peripheral Pin A0 (General)
Design note: Slave Address
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 8 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP9805T-BE/MC (TDFN-8-EP(2x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP9805T-BE/MC (TDFN-8-EP(2x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP9805T-BE/MC (TDFN-8-EP(2x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP9805T-BE/MC (TDFN-8-EP(2x3)) - 4. Package Dimensions (D×E×A)
TDFN-8-EP(2x3) · 2.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP9805T-BE/MC (TDFN-8-EP(2x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP9805T-BE/MC (TDFN-8-EP(2x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (8 figures · Page 1/1)
Showing 1–8 of 8 uncropped original figures for MCP9805
P1 · p01_fig011780×1163px
MCP9805T-BE/MC (TDFN-8-EP(2x3)) — Typical Applications
Typical Applications
P1 · p01_fig01P1
MCP9805T-BE/MC (TDFN-8-EP(2x3)) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P4 · p04_fig011777×1164px
MCP9805T-BE/MC (TDFN-8-EP(2x3)) — Parameters Sym Min Typ Max Units Conditions
Parameters Sym Min Typ Max Units Conditions
P26 · p26_fig011480×958px
MCP9805T-BE/MC (TDFN-8-EP(2x3)) — MCP9805
MCP9805
P26 · p26_fig021777×781px
MCP9805T-BE/MC (TDFN-8-EP(2x3)) — DS21977C-page 26  2005-2013 Microchip Technology Inc. | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer
DS21977C-page 26  2005-2013 Microchip Technology Inc. | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer
P26 · p26_fig01P26
MCP9805T-BE/MC (TDFN-8-EP(2x3)) — Datasheet Page 26 (p26_fig01)
Datasheet Page 26 (p26_fig01)
P27 · p27_fig011540×1719px
MCP9805T-BE/MC (TDFN-8-EP(2x3)) — 2. Exposed pad may vary according to die attach paddle size.
2. Exposed pad may vary according to die attach paddle size.
P28 · p28_fig011575×1859px
MCP9805T-BE/MC (TDFN-8-EP(2x3)) —  | A2 | A | A1 L | c |   | 1 | 2 | D | n | p | B | E | E1 | 10° 5° 0° 10° 5° 0°  Mold Draft Angle Bottom | 10° 5° 0° 10° 5° 0°  Mold Draft Angle Top | 0.30 0.25 0.19 .012 .010 .007 B Lead Width | 0.20 0.15 0.09 .008 .006 .004 c Lead Th
 | A2 | A | A1 L | c |   | 1 | 2 | D | n | p | B | E | E1 | 10° 5° 0° 10° 5° 0°  Mold Draft Angle Bottom | 10° 5° 0° 10° 5° 0°  Mold Draft Angle Top | 0.30 0.25 0.19 .012 .010 .007 B Lead Width | 0.20 0.15 0.09 .008 .006 .004 c Lead Th

Technical Specifications & Part Details (MCP9805T-BE/MC)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP9805T-BE/MC (TDFN-8-EP(2x3)) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 2.00 × 0.90 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 3.0V to 3.6V supply operation across 75°C to +95°C with integrated I2C, ADC, SPI interfaces.
Operating Supply VoltageV_CC / V_DD
3.0V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
75°C to +95°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 2.00 × 0.90 mm (A1=0.03 mm)
Package family: DFN (TDFN-8-EP(2x3))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C, ADC, SPI
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.50×1.50mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MCP9805 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (TDFN-8-EP(2x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 0.75 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TDFN-8-EP(2x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP9805T-BE/MC (TDFN-8-EP(2x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP9805T-BE/MC (TDFN-8-EP(2x3))?

Manufactured by MICROCHIP, the MCP9805T-BE/MC is housed in a TDFN-8-EP(2x3) package with 9 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 3.0V to 3.6V. Key pins include: 1 (A0: Multiplexed I/O & Peripheral Pin A0 (General)), 2 (A1: Multiplexed I/O & Peripheral Pin A1 (General)), 3 (A2: Multiplexed I/O & Peripheral Pin A2 (General)), 4 (GND: Ground Reference Pin (GND)), 5 (SDA: Multiplexed I/O & Peripheral Pin SDA (I2C)), 6 (SCLK: Multiplexed I/O & Peripheral Pin SCLK (SPI, I2C)).

What are the IPC-7351B PCB Footprint dimensions for MCP9805T-BE/MC?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP9805T-BE/MC (TDFN-8-EP(2x3)) has a nominal body envelope of 2.00 × 3.00 mm, pitch e = 0.50 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 1.50 × 1.50 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP9805T-BE/MC?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP9805T-BE/MC (MICROCHIP, TDFN-8-EP(2x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & MCP9805 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1A0Digital_IOSignal terminal A0 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: A0. Supported peripheral buses: General.
2A1Digital_IOSignal terminal A1 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: A1. Supported peripheral buses: General.
3A2Digital_IOSignal terminal A2 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: A2. Supported peripheral buses: General.
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5SDADigital_IOSignal terminal SDA (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: SDA. Supported peripheral buses: I2C.
6SCLKDigital_IOSignal terminal SCLK (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: SCLK. Supported peripheral buses: SPI, I2C.
7EventDigital_IOSignal terminal Event (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: Event. Supported peripheral buses: General.
8VDDPower_InPrimary positive power supply input (VDD) operating in the 3.0V to 3.6V domain (Max rating: 3.6V).
9GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.