MCP603T-E/CH (SOT-23-6) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP603T-E/CH

MICROCHIPSOT-23-6 · 6 Pins · Pitch 0.95mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP603T-E/CH (SOT-23-6)1V OUTA2V – INA3V + INA6V – INB5V + INB4VSSGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
123456E=2.90mm · Pitch e=0.95mmD=1.60mm-3-2-1012343210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 2.90mm × 1.60mm · Pitch: 0.95mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (6/6)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1V OUTAI/OMultiplexed I/O & Peripheral Pin V OUTA (General)
2V – INAI/OMultiplexed I/O & Peripheral Pin V – INA (General)
3V + INAI/OMultiplexed I/O & Peripheral Pin V + INA (General)
4VSSGNDGround Reference Pin (VSS)
5V + INBI/OMultiplexed I/O & Peripheral Pin V + INB (General)
6V – INBI/OMultiplexed I/O & Peripheral Pin V – INB (General)
PIN 1 V OUTA
I/O
Multiplexed I/O & Peripheral Pin V OUTA (General)
Design note: Analog Output (op amp A)
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 11 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP603T-E/CH (SOT-23-6) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP603T-E/CH (SOT-23-6) - 2. Standard Pinout (Top View)
True package pinout (6 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP603T-E/CH (SOT-23-6) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP603T-E/CH (SOT-23-6) - 4. Package Dimensions (D×E×A)
SOT-23-6 · 2.90×1.60mm · Pitch 0.95mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP603T-E/CH (SOT-23-6) - 5. Recommended Land Pattern
IPC-7351B Footprint (6 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP603T-E/CH (SOT-23-6) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (11 figures · Page 1/1)
Showing 1–11 of 11 uncropped original figures for MCP603 / MCP604 / MCP601
P17 · p17_fig01EXACT PACKAGE
MCP603T-E/CH (SOT-23-6) — MCP601/1R/2/3/4
MCP601/1R/2/3/4
P1 · p01_fig011777×811px
MCP603T-E/CH (SOT-23-6) — © 2007 Microchip Technology Inc. DS21314G-page 1 | • SPICE Macro Models • FilterLab® Software • Mindi™ Simulation Tool • MAPS (Microchip Advanced Part Selector) • Analog Demonstration and Evaluation Boards • Application Notes | Package Type
© 2007 Microchip Technology Inc. DS21314G-page 1 | • SPICE Macro Models • FilterLab® Software • Mindi™ Simulation Tool • MAPS (Microchip Advanced Part Selector) • Analog Demonstration and Evaluation Boards • Application Notes | Package Type
P1 · p01_fig01P1
MCP603T-E/CH (SOT-23-6) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P4 · p04_fig011778×969px
MCP603T-E/CH (SOT-23-6) — MCP601/1R/2/3/4
MCP601/1R/2/3/4
P4 · p04_fig02867×466px
MCP603T-E/CH (SOT-23-6) — FIGURE 1-2: AC and DC Test Circuit for Most Non-Inverting Gain Conditions.
FIGURE 1-2: AC and DC Test Circuit for Most Non-Inverting Gain Conditions.
P4 · p04_fig03867×466px
MCP603T-E/CH (SOT-23-6) — FIGURE 1-2: AC and DC Test Circuit for Most Non-Inverting Gain Conditions.
FIGURE 1-2: AC and DC Test Circuit for Most Non-Inverting Gain Conditions.
P11 · p11_fig011486×1749px
MCP603T-E/CH (SOT-23-6) — The op amp output pins are low-impedance voltage sources.
The op amp output pins are low-impedance voltage sources.
P14 · p14_fig011777×765px
MCP603T-E/CH (SOT-23-6) — FIGURE 4-8: Second-Order, Low-Pass Sallen-Key Filter.
FIGURE 4-8: Second-Order, Low-Pass Sallen-Key Filter.
P14 · p14_fig021777×916px
MCP603T-E/CH (SOT-23-6) — FIGURE 4-8: Second-Order, Low-Pass Sallen-Key Filter.
FIGURE 4-8: Second-Order, Low-Pass Sallen-Key Filter.
P17 · p17_fig021777×785px
MCP603T-E/CH (SOT-23-6) — © 2007 Microchip Technology Inc. DS21314G-page 17 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spec
© 2007 Microchip Technology Inc. DS21314G-page 17 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spec
P17 · p17_fig01P17
MCP603T-E/CH (SOT-23-6) — Datasheet Page 17 (p17_fig01)
Datasheet Page 17 (p17_fig01)

Technical Specifications & Part Details (MCP603T-E/CH)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP603T-E/CH (SOT-23-6) is a 6-pin standard electronic & interconnect component featuring a 2.90 × 1.60 × 1.10 mm mechanical envelope (lead pitch e = 0.95 mm). Rated for 2.7V to 6.0V supply operation across -40°C to +85°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 6.0V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
2.8 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
230 µA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.90 × 1.60 × 1.10 mm (A1=0.08 mm)
Package family: SOT23 (SOT-23-6)
Pin Count & Lead PitchN / e
6 Pins | Pitch e = 0.95 mm (37.4 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol6 auto-grouped pins
OK
IPC-7351B Land Pattern6 pads · Pitch 0.95mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MCP603 / MCP604 / MCP601 (3)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (SOT-23-6)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.90 × 1.60 mm
Height (A) & Pitch (e)IPC-7351B
A=1.10mm · e=0.95mm
Pad Size (W × L)Level B
0.60 × 1.00 mm
Pins / Total PadsTopology
6P / 6Pad (SOT_SMALL)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SOT-23-6
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP603T-E/CH (SOT-23-6)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP603T-E/CH (SOT-23-6)?

Manufactured by MICROCHIP, the MCP603T-E/CH is housed in a SOT-23-6 package with 6 pins and a 0.95 mm lead pitch, supporting a VCC supply range of 2.7V to 6.0V. Key pins include: 1 (V OUTA: Multiplexed I/O & Peripheral Pin V OUTA (General)), 2 (V – INA: Multiplexed I/O & Peripheral Pin V – INA (General)), 3 (V + INA: Multiplexed I/O & Peripheral Pin V + INA (General)), 4 (VSS: Ground Reference Pin (VSS)), 5 (V + INB: Multiplexed I/O & Peripheral Pin V + INB (General)), 6 (V – INB: Multiplexed I/O & Peripheral Pin V – INB (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP603T-E/CH?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP603T-E/CH (SOT-23-6) has a nominal body envelope of 1.60 × 2.90 mm, pitch e = 0.95 mm, and 6 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP603T-E/CH?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP603T-E/CH (MICROCHIP, SOT-23-6) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (6 pins) & MCP603 / MCP604 / MCP601 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1V OUTADigital_IOSignal terminal V OUTA (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: V OUTA. Supported peripheral buses: General.
2V – INADigital_IOSignal terminal V – INA (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: V – INA. Supported peripheral buses: General.
3V + INADigital_IOSignal terminal V + INA (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: V + INA. Supported peripheral buses: General.
4VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
5V + INBDigital_IOSignal terminal V + INB (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: V + INB. Supported peripheral buses: General.
6V – INBDigital_IOSignal terminal V – INB (I/O, 2.7V to 6.0V domain). Multiplexed alternate functions: V – INB. Supported peripheral buses: General.