MCP40D18T-103E/LT (SC-70-6) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP40D18T-103E/LT

MICROCHIPSC-70-6 · 6 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP40D18T-103E/LT (SC-70-6)1VDD2VSS3SCL6W5B4SDAGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
123456E=2.00mm · Pitch e=0.65mmD=1.25mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 2.00mm × 1.25mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (6/6)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VDDPowerPower Supply Input (VDD — 2.7V to 5.5V)
2VSSGNDGround Reference Pin (VSS)
3SCLI/OMultiplexed I/O & Peripheral Pin SCL (I2C)
4SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
5BI/OMultiplexed I/O & Peripheral Pin B (General)
6WI/OMultiplexed I/O & Peripheral Pin W (General)
PIN 1 VDD
Power
Power Supply Input (VDD — 2.7V to 5.5V)
Design note: Positive Power Supply Input
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 18 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP40D18T-103E/LT (SC-70-6) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP40D18T-103E/LT (SC-70-6) - 2. Standard Pinout (Top View)
True package pinout (6 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP40D18T-103E/LT (SC-70-6) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP40D18T-103E/LT (SC-70-6) - 4. Package Dimensions (D×E×A)
SC-70-6 · 2.00×1.25mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP40D18T-103E/LT (SC-70-6) - 5. Recommended Land Pattern
IPC-7351B Footprint (6 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP40D18T-103E/LT (SC-70-6) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (18 figures · Page 1/2)
Showing 1–12 of 18 uncropped original figures for MCP40D18T
P1 · p01_fig011777×786px
MCP40D18T-103E/LT (SC-70-6) — 5 B A W
5 B A W
P1 · p01_fig021777×946px
MCP40D18T-103E/LT (SC-70-6) — MCP40D17/18/19
MCP40D17/18/19
P2 · p02_fig011275×835px
MCP40D18T-103E/LT (SC-70-6) — Comparison of Similar Microchip Devices ( 1)
Comparison of Similar Microchip Devices ( 1)
P2 · p02_fig021779×1381px
MCP40D18T-103E/LT (SC-70-6) — Comparison of Similar Microchip Devices ( 1) | Device | Control Interface | # of Steps | Wiper Configuration | Memory Type | Resistance (typical) | VDD Operating Range | HV Interface WiperLock Technology | Package Options (kΩ) | MCP40D17 (
Comparison of Similar Microchip Devices ( 1) | Device | Control Interface | # of Steps | Wiper Configuration | Memory Type | Resistance (typical) | VDD Operating Range | HV Interface WiperLock Technology | Package Options (kΩ) | MCP40D17 (
P38 · p38_fig011779×1088px
MCP40D18T-103E/LT (SC-70-6) — Figure 5-14 shows the I2C write communication behavior of the Master Device and the MCP40D17/18/ 19 device and the resultant I2C bus values.
Figure 5-14 shows the I2C write communication behavior of the Master Device and the MCP40D17/18/ 19 device and the resultant I2C bus values.
P39 · p39_fig011779×1228px
MCP40D18T-103E/LT (SC-70-6) — FIGURE 5-13: I2C Write Command Format (Slave Address = “0101110”).
FIGURE 5-13: I2C Write Command Format (Slave Address = “0101110”).
P39 · p39_fig021508×1259px
MCP40D18T-103E/LT (SC-70-6) — FIGURE 5-13: I2C Write Command Format (Slave Address = “0101110”).
FIGURE 5-13: I2C Write Command Format (Slave Address = “0101110”).
P40 · p40_fig011779×951px
MCP40D18T-103E/LT (SC-70-6) — FIGURE 5-15: I2C Read Command Format (Slave Address = “0101110”).
FIGURE 5-15: I2C Read Command Format (Slave Address = “0101110”).
P40 · p40_fig021484×1628px
MCP40D18T-103E/LT (SC-70-6) — FIGURE 5-15: I2C Read Command Format (Slave Address = “0101110”).
FIGURE 5-15: I2C Read Command Format (Slave Address = “0101110”).
P43 · p43_fig01867×503px
MCP40D18T-103E/LT (SC-70-6) — FIGURE 6-3: Potentiometer Configuration.
FIGURE 6-3: Potentiometer Configuration.
P43 · p43_fig02867×514px
MCP40D18T-103E/LT (SC-70-6) — FIGURE 6-2: Rheostat Configuration.
FIGURE 6-2: Rheostat Configuration.
P43 · p43_fig01P43
MCP40D18T-103E/LT (SC-70-6) — Datasheet Page 43 (p43_fig01)
Datasheet Page 43 (p43_fig01)
Page 1 / 2 (18 extracted figures)

Technical Specifications & Part Details (MCP40D18T-103E/LT)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP40D18T-103E/LT (SC-70-6) is a 6-pin standard electronic & interconnect component featuring a 2.00 × 1.25 × 0.95 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 2.7V to 5.5V supply operation across 0°C to 70°C with integrated SPI, I2C interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
0°C to 70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
2 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.00 × 1.25 × 0.95 mm (A1=0.06 mm)
Package family: SOT23 (SC-70-6)
Pin Count & Lead PitchN / e
6 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI, I2C
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol6 auto-grouped pins
OK
IPC-7351B Land Pattern6 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (SC-70-6)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.00 × 1.25 mm
Height (A) & Pitch (e)IPC-7351B
A=0.95mm · e=0.65mm
Pad Size (W × L)Level B
0.42 × 0.85 mm
Pins / Total PadsTopology
6P / 6Pad (SOT_SMALL)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
SC-70-6
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP40D18T-103E/LT (SC-70-6)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP40D18T-103E/LT (SC-70-6)?

Manufactured by MICROCHIP, the MCP40D18T-103E/LT is housed in a SC-70-6 package with 6 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 2.7V to 5.5V. Key pins include: 1 (VDD: Power Supply Input (VDD — 2.7V to 5.5V)), 2 (VSS: Ground Reference Pin (VSS)), 3 (SCL: Multiplexed I/O & Peripheral Pin SCL (I2C)), 4 (SDA: Multiplexed I/O & Peripheral Pin SDA (I2C)), 5 (B: Multiplexed I/O & Peripheral Pin B (General)), 6 (W: Multiplexed I/O & Peripheral Pin W (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP40D18T-103E/LT?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP40D18T-103E/LT (SC-70-6) has a nominal body envelope of 1.25 × 2.00 mm, pitch e = 0.65 mm, and 6 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP40D18T-103E/LT?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP40D18T-103E/LT (MICROCHIP, SC-70-6) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (6 pins) & MCP40D18T Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VDDPower_InPrimary positive power supply input (VDD) operating in the 2.7V to 5.5V domain (Max rating: 5.5V).
2VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
3SCLDigital_IOSignal terminal SCL (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: I2C_SERIAL. Supported peripheral buses: I2C.
4SDADigital_IOSignal terminal SDA (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: I2C_SERIAL. Supported peripheral buses: I2C.
5BDigital_IOSignal terminal B (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: B. Supported peripheral buses: General.
6WDigital_IOSignal terminal W (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: W. Supported peripheral buses: General.