MCP3918A1T-E/ML (QFN-20-EP(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP3918A1T-E/ML

MICROCHIPQFN-20-EP(4x4) · 21 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP3918A1T-E/ML (QFN-20-EP(4x4))1CH0+2CH0-3NC4NC5A GND6REFIN+/OUT7REFIN-8D GND9NC10MDAT011DR/GAIN121EP20AV DD19DV DD18RESET/OSR017SDI/OSR116SDO15SCK/MCLK14CS/BOOST13OSC2/MODE12OSC1/CLKI/GAGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.820.315.210.25.10-5.1-10.2-15.2-20.3mm
2. 2D FOOTPRINT
123456789101112131415161718192021E=4.00mm · Pitch e=0.50mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (21/21)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1CH0+I/OMultiplexed I/O & Peripheral Pin CH0+ (General)
2CH0-I/OMultiplexed I/O & Peripheral Pin CH0- (General)
3NCI/OMultiplexed I/O & Peripheral Pin NC (General)
4NCI/OMultiplexed I/O & Peripheral Pin NC (General)
5A GNDGNDGround Reference Pin (A GND)
6REFIN+/OUTI/OMultiplexed I/O & Peripheral Pin REFIN+/OUT (General)
7REFIN-I/OMultiplexed I/O & Peripheral Pin REFIN- (General)
8D GNDGNDGround Reference Pin (D GND)
9NCI/OMultiplexed I/O & Peripheral Pin NC (General)
10MDAT0I/OMultiplexed I/O & Peripheral Pin MDAT0 (General)
11DR/GAIN1AnalogMultiplexed I/O & Peripheral Pin DR/GAIN1 (General)
12OSC1/CLKI/GAIN0I/OMultiplexed I/O & Peripheral Pin OSC1/CLKI/GAIN0 (RTC/CLK)
13OSC2/MODEI/OMultiplexed I/O & Peripheral Pin OSC2/MODE (RTC/CLK)
14CS/BOOSTI/OMultiplexed I/O & Peripheral Pin CS/BOOST (General)
15SCK/MCLKI/OMultiplexed I/O & Peripheral Pin SCK/MCLK (SPI)
16SDOI/OMultiplexed I/O & Peripheral Pin SDO (General)
17SDI/OSR1I/OMultiplexed I/O & Peripheral Pin SDI/OSR1 (General)
18RESET/OSR0ISystem Enable & Hardware Reset (RESET/OSR0)
19DV DDI/OMultiplexed I/O & Peripheral Pin DV DD (General)
20AV DDI/OMultiplexed I/O & Peripheral Pin AV DD (General)
21EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 CH0+
I/O
Multiplexed I/O & Peripheral Pin CH0+ (General)
Design note: Noninverting Analog Input Pin for Channel 0
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 25 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP3918A1T-E/ML (QFN-20-EP(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP3918A1T-E/ML (QFN-20-EP(4x4)) - 2. Standard Pinout (Top View)
True package pinout (21 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP3918A1T-E/ML (QFN-20-EP(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP3918A1T-E/ML (QFN-20-EP(4x4)) - 4. Package Dimensions (D×E×A)
QFN-20-EP(4x4) · 4.00×4.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP3918A1T-E/ML (QFN-20-EP(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (21 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP3918A1T-E/ML (QFN-20-EP(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (25 figures · Page 1/3)
Showing 1–12 of 25 uncropped original figures for MCP3918
P1 · p01_fig01377×200px
MCP3918A1T-E/ML (QFN-20-EP(4x4)) — 3V Single-Channel Analog Front End
3V Single-Channel Analog Front End
P2 · p02_fig011723×1142px
MCP3918A1T-E/ML (QFN-20-EP(4x4)) — * Includes Exposed Thermal Pad (EP); see Table 3-1.
* Includes Exposed Thermal Pad (EP); see Table 3-1.
P2 · p02_fig021777×936px
MCP3918A1T-E/ML (QFN-20-EP(4x4)) — REFIN+/OUT
REFIN+/OUT
P2 · p02_fig03456×247px
MCP3918A1T-E/ML (QFN-20-EP(4x4)) — -
-
P2 · p02_fig04159×348px
MCP3918A1T-E/ML (QFN-20-EP(4x4)) — EN_MDAT
EN_MDAT
P2 · p02_fig01P2
MCP3918A1T-E/ML (QFN-20-EP(4x4)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P2 · p02_fig03P2
MCP3918A1T-E/ML (QFN-20-EP(4x4)) — Datasheet Page 2 (p02_fig03)
Datasheet Page 2 (p02_fig03)
P53 · p53_fig011777×635px
MCP3918A1T-E/ML (QFN-20-EP(4x4)) — FIGURE 7-1: MCP3918 Two-Wire Interface Typical Application Schematic.
FIGURE 7-1: MCP3918 Two-Wire Interface Typical Application Schematic.
P53 · p53_fig02586×398px
MCP3918A1T-E/ML (QFN-20-EP(4x4)) — FIGURE 7-1: MCP3918 Two-Wire Interface Typical Application Schematic.
FIGURE 7-1: MCP3918 Two-Wire Interface Typical Application Schematic.
P55 · p55_fig011777×1057px
MCP3918A1T-E/ML (QFN-20-EP(4x4)) — FIGURE 7-2: Frame Word. TABLE 7-4: FRAME COUNTER SETTINGS CNT1 CNT0 Frame Number
FIGURE 7-2: Frame Word. TABLE 7-4: FRAME COUNTER SETTINGS CNT1 CNT0 Frame Number
P55 · p55_fig02871×404px
MCP3918A1T-E/ML (QFN-20-EP(4x4)) — FIGURE 7-2: Frame Word. TABLE 7-4: FRAME COUNTER SETTINGS CNT1 CNT0 Frame Number
FIGURE 7-2: Frame Word. TABLE 7-4: FRAME COUNTER SETTINGS CNT1 CNT0 Frame Number
P55 · p55_fig031778×737px
MCP3918A1T-E/ML (QFN-20-EP(4x4)) — FIGURE 7-3: MCP3918 Two-Wire Communication Protocol.
FIGURE 7-3: MCP3918 Two-Wire Communication Protocol.
Page 1 / 3 (25 extracted figures)

Technical Specifications & Part Details (MCP3918A1T-E/ML)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP3918A1T-E/ML (QFN-20-EP(4x4)) is a 20-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 0.90 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2.7V-3.6V supply operation across -40°C to +125°C with integrated SPI, ADC, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V-3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
4 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 0.90 mm (A1=0.03 mm)
Package family: QFN (QFN-20-EP(4x4))
Pin Count & Lead PitchN / e
20 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI, ADC, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol21 auto-grouped pins
OK
IPC-7351B Land Pattern21 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.70×2.70mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MCP3918 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (QFN-20-EP(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
21P / 21Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-20-EP(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP3918A1T-E/ML (QFN-20-EP(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP3918A1T-E/ML (QFN-20-EP(4x4))?

Manufactured by MICROCHIP, the MCP3918A1T-E/ML is housed in a QFN-20-EP(4x4) package with 21 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.7V-3.6V. Key pins include: 1 (CH0+: Multiplexed I/O & Peripheral Pin CH0+ (General)), 2 (CH0-: Multiplexed I/O & Peripheral Pin CH0- (General)), 3 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 4 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 5 (A GND: Ground Reference Pin (A GND)), 6 (REFIN+/OUT: Multiplexed I/O & Peripheral Pin REFIN+/OUT (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP3918A1T-E/ML?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP3918A1T-E/ML (QFN-20-EP(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.50 mm, and 21 copper pads plus a central exposed thermal pad (EPAD) of 2.70 × 2.70 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP3918A1T-E/ML?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP3918A1T-E/ML (MICROCHIP, QFN-20-EP(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (21 pins) & MCP3918 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1CH0+Digital_IOSignal terminal CH0+ (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: CH0+. Supported peripheral buses: General.
2CH0-Digital_IOSignal terminal CH0- (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: CH0-. Supported peripheral buses: General.
3NCNCSignal terminal NC (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
4NCNCSignal terminal NC (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
5A GNDGND0V electrical ground return terminal (A GND) for internal core logic, I/O drivers, and analog sub-blocks.
6REFIN+/OUTDigital_IOSignal terminal REFIN+/OUT (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: REFIN+/OUT. Supported peripheral buses: General.
7REFIN-Digital_IOSignal terminal REFIN- (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: REFIN-. Supported peripheral buses: General.
8D GNDGND0V electrical ground return terminal (D GND) for internal core logic, I/O drivers, and analog sub-blocks.
9NCNCSignal terminal NC (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
10MDAT0Digital_IOSignal terminal MDAT0 (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: MDAT0. Supported peripheral buses: General.
11DR/GAIN1AnalogSignal terminal DR/GAIN1 (Analog, 2.7V-3.6V domain). Multiplexed alternate functions: DR/GAIN1. Supported peripheral buses: General.
12OSC1/CLKI/GAIN0AnalogSignal terminal OSC1/CLKI/GAIN0 (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: OSC1/CLKI/GAIN0. Supported peripheral buses: RTC/CLK.
13OSC2/MODEDigital_IOSignal terminal OSC2/MODE (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: OSC2/MODE. Supported peripheral buses: RTC/CLK.
14CS/BOOSTDigital_IOSignal terminal CS/BOOST (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: CS/BOOST. Supported peripheral buses: General.
15SCK/MCLKDigital_IOSignal terminal SCK/MCLK (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: SCK/MCLK. Supported peripheral buses: SPI.
16SDODigital_IOSignal terminal SDO (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: SDO. Supported peripheral buses: General.
17SDI/OSR1Digital_IOSignal terminal SDI/OSR1 (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: SDI/OSR1. Supported peripheral buses: General.
18RESET/OSR0Digital_IOActive-low hardware reset terminal (RESET/OSR0): pulling this pin Low resets the processor core and peripherals.
19DV DDDigital_IOSignal terminal DV DD (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: DV DD. Supported peripheral buses: General.
20AV DDDigital_IOSignal terminal AV DD (I/O, 2.7V-3.6V domain). Multiplexed alternate functions: AV DD. Supported peripheral buses: General.
21EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.