MCP3423T-E/MF (DFN-10-EP(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP3423T-E/MF

MICROCHIPDFN-10-EP(3x3) · 11 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP3423T-E/MF (DFN-10-EP(3x3))1CH1+2CH1-3VSS4CH2+5CH2-6VDD11GND10Adr19Adr08SCL7SDAGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
1234567891011E=3.00mm · Pitch e=0.50mmD=3.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (11/11)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1CH1+I/OMultiplexed I/O & Peripheral Pin CH1+ (General)
2CH1-I/OMultiplexed I/O & Peripheral Pin CH1- (General)
3VSSGNDGround Reference Pin (VSS)
4CH2+I/OMultiplexed I/O & Peripheral Pin CH2+ (General)
5CH2-I/OMultiplexed I/O & Peripheral Pin CH2- (General)
6VDDPowerPower Supply Input (VDD — 2.7V to 5.5V)
7SDAI/OMultiplexed I/O & Peripheral Pin SDA (I2C)
8SCLI/OMultiplexed I/O & Peripheral Pin SCL (I2C)
9Adr0I/OMultiplexed I/O & Peripheral Pin Adr0 (General)
10Adr1I/OMultiplexed I/O & Peripheral Pin Adr1 (General)
11GNDGNDGround Reference Pin (GND)
PIN 1 CH1+
I/O
Multiplexed I/O & Peripheral Pin CH1+ (General)
Design note: Signal terminal CH1+ (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: CH1+. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 13 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP3423T-E/MF (DFN-10-EP(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP3423T-E/MF (DFN-10-EP(3x3)) - 2. Standard Pinout (Top View)
True package pinout (11 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP3423T-E/MF (DFN-10-EP(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP3423T-E/MF (DFN-10-EP(3x3)) - 4. Package Dimensions (D×E×A)
DFN-10-EP(3x3) · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP3423T-E/MF (DFN-10-EP(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (11 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP3423T-E/MF (DFN-10-EP(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (13 figures · Page 1/2)
Showing 1–12 of 13 uncropped original figures for MCP3422 / MCP3423
P2 · p02_fig01513×824px
MCP3423T-E/MF (DFN-10-EP(3x3)) — * Includes Exposed Thermal Pad (EP); see Table 3-1.
* Includes Exposed Thermal Pad (EP); see Table 3-1.
P2 · p02_fig021482×862px
MCP3423T-E/MF (DFN-10-EP(3x3)) — Functional Block Diagram
Functional Block Diagram
P2 · p02_fig031063×728px
MCP3423T-E/MF (DFN-10-EP(3x3)) — * Includes Exposed Thermal Pad (EP); see Table 3-1.
* Includes Exposed Thermal Pad (EP); see Table 3-1.
P2 · p02_fig041267×782px
MCP3423T-E/MF (DFN-10-EP(3x3)) — Functional Block Diagram
Functional Block Diagram
P2 · p02_fig01P2
MCP3423T-E/MF (DFN-10-EP(3x3)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P2 · p02_fig03P2
MCP3423T-E/MF (DFN-10-EP(3x3)) — Datasheet Page 2 (p02_fig03)
Datasheet Page 2 (p02_fig03)
P12 · p12_fig011777×1016px
MCP3423T-E/MF (DFN-10-EP(3x3)) — FIGURE 3-1: Equivalent Analog Input Circuit. 3.3 Serial Clock Pin (SCL)
FIGURE 3-1: Equivalent Analog Input Circuit. 3.3 Serial Clock Pin (SCL)
P31 · p31_fig01863×1052px
MCP3423T-E/MF (DFN-10-EP(3x3)) — FIGURE 6-1: Typical Connection.
FIGURE 6-1: Typical Connection.
P31 · p31_fig02867×605px
MCP3423T-E/MF (DFN-10-EP(3x3)) — FIGURE 6-2: Example of Multiple Device Connection on I2C Bus.
FIGURE 6-2: Example of Multiple Device Connection on I2C Bus.
P31 · p31_fig01P31
MCP3423T-E/MF (DFN-10-EP(3x3)) — Datasheet Page 31 (p31_fig01)
Datasheet Page 31 (p31_fig01)
P39 · p39_fig021777×756px
MCP3423T-E/MF (DFN-10-EP(3x3)) — © 2009 Microchip Technology Inc. DS22088C-page 39 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spec
© 2009 Microchip Technology Inc. DS22088C-page 39 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-spec
P39 · p39_fig02P39
MCP3423T-E/MF (DFN-10-EP(3x3)) — Datasheet Page 39 (p39_fig02)
Datasheet Page 39 (p39_fig02)
Page 1 / 2 (13 extracted figures)

Technical Specifications & Part Details (MCP3423T-E/MF)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP3423T-E/MF (DFN-10-EP(3x3)) is a 10-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.80 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 2.7V to 5.5V supply operation across -40°C to +125°C with integrated I2C, ADC interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
100 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.80 mm (A1=0.03 mm)
Package family: DFN (DFN-10-EP(3x3))
Pin Count & Lead PitchN / e
10 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
I2C, ADC
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol11 auto-grouped pins
OK
IPC-7351B Land Pattern11 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.48×1.62mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (DFN-10-EP(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.80mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.67 mm
Pins / Total PadsTopology
11P / 11Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DFN-10-EP(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP3423T-E/MF (DFN-10-EP(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP3423T-E/MF (DFN-10-EP(3x3))?

Manufactured by MICROCHIP, the MCP3423T-E/MF is housed in a DFN-10-EP(3x3) package with 11 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 2.7V to 5.5V. Key pins include: 1 (CH1+: Multiplexed I/O & Peripheral Pin CH1+ (General)), 2 (CH1-: Multiplexed I/O & Peripheral Pin CH1- (General)), 3 (VSS: Ground Reference Pin (VSS)), 4 (CH2+: Multiplexed I/O & Peripheral Pin CH2+ (General)), 5 (CH2-: Multiplexed I/O & Peripheral Pin CH2- (General)), 6 (VDD: Power Supply Input (VDD — 2.7V to 5.5V)).

What are the IPC-7351B PCB Footprint dimensions for MCP3423T-E/MF?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP3423T-E/MF (DFN-10-EP(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 11 copper pads plus a central exposed thermal pad (EPAD) of 2.48 × 1.62 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP3423T-E/MF?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP3423T-E/MF (MICROCHIP, DFN-10-EP(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (11 pins) & MCP3422 / MCP3423 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1CH1+Digital_IOSignal terminal CH1+ (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: CH1+. Supported peripheral buses: General.
2CH1-Digital_IOSignal terminal CH1- (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: CH1-. Supported peripheral buses: General.
3VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
4CH2+Digital_IOSignal terminal CH2+ (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: CH2+. Supported peripheral buses: General.
5CH2-Digital_IOSignal terminal CH2- (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: CH2-. Supported peripheral buses: General.
6VDDPower_InPrimary positive power supply input (VDD) operating in the 2.7V to 5.5V domain (Max rating: 5.5V).
7SDADigital_IOSignal terminal SDA (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SDA. Supported peripheral buses: I2C.
8SCLDigital_IOSignal terminal SCL (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SCL. Supported peripheral buses: I2C.
9Adr0Digital_IOSignal terminal Adr0 (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: Adr0. Supported peripheral buses: General.
10Adr1Digital_IOSignal terminal Adr1 (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: Adr1. Supported peripheral buses: General.
11GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.