MCP2021T-500E/MD (DFN-8-EP(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP2021T-500E/MD

MICROCHIPDFN-8-EP(4x4) · 9 Pins · Pitch 0.80mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP2021T-500E/MD (DFN-8-EP(4x4))1RXD2CS/LWAKE3VREG4TXD5VSS9GND8FAULT/TXE7VBB6LBUSGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=4.00mm · Pitch e=0.80mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.80mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1RXDI/OMultiplexed I/O & Peripheral Pin RXD (UART)
2CS/LWAKEI/OMultiplexed I/O & Peripheral Pin CS/LWAKE (General)
3VREGI/OMultiplexed I/O & Peripheral Pin VREG (General)
4TXDI/OMultiplexed I/O & Peripheral Pin TXD (UART)
5VSSGNDGround Reference Pin (VSS)
6LBUSI/OMultiplexed I/O & Peripheral Pin LBUS (General)
7VBBI/OMultiplexed I/O & Peripheral Pin VBB (General)
8FAULT/TXEI/OMultiplexed I/O & Peripheral Pin FAULT/TXE (General)
9GNDGNDGround Reference Pin (GND)
PIN 1 RXD
I/O
Multiplexed I/O & Peripheral Pin RXD (UART)
Design note: Receive Data Output (CMOS)
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 17 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP2021T-500E/MD (DFN-8-EP(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP2021T-500E/MD (DFN-8-EP(4x4)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP2021T-500E/MD (DFN-8-EP(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP2021T-500E/MD (DFN-8-EP(4x4)) - 4. Package Dimensions (D×E×A)
DFN-8-EP(4x4) · 4.00×4.00mm · Pitch 0.80mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP2021T-500E/MD (DFN-8-EP(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP2021T-500E/MD (DFN-8-EP(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (17 figures · Page 1/2)
Showing 1–12 of 17 uncropped original figures for MCP2021
P1 · p01_fig01377×200px
MCP2021T-500E/MD (DFN-8-EP(4x4)) — LIN Transceiver with Voltage Regulator
LIN Transceiver with Voltage Regulator
P1 · p01_fig02408×308px
MCP2021T-500E/MD (DFN-8-EP(4x4)) —  2005-2014 Microchip Technology Inc. DS20002018H-page 1
 2005-2014 Microchip Technology Inc. DS20002018H-page 1
P1 · p01_fig02P1
MCP2021T-500E/MD (DFN-8-EP(4x4)) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P2 · p02_fig01802×1007px
MCP2021T-500E/MD (DFN-8-EP(4x4)) — * Includes Exposed Thermal Pad (EP); see Table 1-2.
* Includes Exposed Thermal Pad (EP); see Table 1-2.
P2 · p02_fig02763×733px
MCP2021T-500E/MD (DFN-8-EP(4x4)) — NC
NC
P2 · p02_fig031772×1258px
MCP2021T-500E/MD (DFN-8-EP(4x4)) — * Includes Exposed Thermal Pad (EP); see Table 1-2.
* Includes Exposed Thermal Pad (EP); see Table 1-2.
P2 · p02_fig01P2
MCP2021T-500E/MD (DFN-8-EP(4x4)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P2 · p02_fig02P2
MCP2021T-500E/MD (DFN-8-EP(4x4)) — Datasheet Page 2 (p02_fig02)
Datasheet Page 2 (p02_fig02)
P14 · p14_fig011607×964px
MCP2021T-500E/MD (DFN-8-EP(4x4)) — FIGURE 1-6: TYPICAL MCP2021/MCP2021P APPLICATION
FIGURE 1-6: TYPICAL MCP2021/MCP2021P APPLICATION
P15 · p15_fig011611×1030px
MCP2021T-500E/MD (DFN-8-EP(4x4)) — FIGURE 1-7: TYPICAL MCP2022/MCP2022P APPLICATION
FIGURE 1-7: TYPICAL MCP2022/MCP2022P APPLICATION
P15 · p15_fig021777×978px
MCP2021T-500E/MD (DFN-8-EP(4x4)) — FIGURE 1-8: TYPICAL LIN NETWORK CONFIGURATION
FIGURE 1-8: TYPICAL LIN NETWORK CONFIGURATION
P31 · p31_fig011777×2564px
MCP2021T-500E/MD (DFN-8-EP(4x4)) — MCP2021/2 MCP2021 MCP2022/1P/2P
MCP2021/2 MCP2021 MCP2022/1P/2P
Page 1 / 2 (17 extracted figures)

Technical Specifications & Part Details (MCP2021T-500E/MD)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP2021T-500E/MD (DFN-8-EP(4x4)) is a 8-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 0.90 mm mechanical envelope (lead pitch e = 0.80 mm). Rated for 6.0V-18.0V supply operation across -40°C to +125°C with integrated UART interfaces.
Operating Supply VoltageV_CC / V_DD
6.0V-18.0V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 0.90 mm (A1=0.03 mm)
Package family: DFN (DFN-8-EP(4x4))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.80 mm (31.5 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.80mm
OK
IPC-7525 60% Solder PasteEPAD 3.00×2.20mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (DFN-8-EP(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.80mm
Pad Size (W × L)Level B
0.43 × 1.04 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DFN-8-EP(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP2021T-500E/MD (DFN-8-EP(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP2021T-500E/MD (DFN-8-EP(4x4))?

Manufactured by MICROCHIP, the MCP2021T-500E/MD is housed in a DFN-8-EP(4x4) package with 9 pins and a 0.80 mm lead pitch, supporting a VCC supply range of 6.0V-18.0V. Key pins include: 1 (RXD: Multiplexed I/O & Peripheral Pin RXD (UART)), 2 (CS/LWAKE: Multiplexed I/O & Peripheral Pin CS/LWAKE (General)), 3 (VREG: Multiplexed I/O & Peripheral Pin VREG (General)), 4 (TXD: Multiplexed I/O & Peripheral Pin TXD (UART)), 5 (VSS: Ground Reference Pin (VSS)), 6 (LBUS: Multiplexed I/O & Peripheral Pin LBUS (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP2021T-500E/MD?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP2021T-500E/MD (DFN-8-EP(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.80 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 3.00 × 2.20 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP2021T-500E/MD?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP2021T-500E/MD (MICROCHIP, DFN-8-EP(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & MCP2021 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1RXDDigital_IOSignal terminal RXD (I/O, 6.0V-18.0V domain). Multiplexed alternate functions: RXD. Supported peripheral buses: UART.
2CS/LWAKEDigital_IOSignal terminal CS/LWAKE (I/O, 6.0V-18.0V domain). Multiplexed alternate functions: CS/LWAKE. Supported peripheral buses: General.
3VREGDigital_IOSignal terminal VREG (I/O, 6.0V-18.0V domain). Multiplexed alternate functions: VREG. Supported peripheral buses: General.
4TXDDigital_IOSignal terminal TXD (I/O, 6.0V-18.0V domain). Multiplexed alternate functions: TXD. Supported peripheral buses: UART.
5VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
6LBUSDigital_IOSignal terminal LBUS (I/O, 6.0V-18.0V domain). Multiplexed alternate functions: LBUS. Supported peripheral buses: General.
7VBBDigital_IOSignal terminal VBB (I/O, 6.0V-18.0V domain). Multiplexed alternate functions: VBB. Supported peripheral buses: General.
8FAULT/TXEDigital_IOSignal terminal FAULT/TXE (I/O, 6.0V-18.0V domain). Multiplexed alternate functions: FAULT/TXE. Supported peripheral buses: General.
9GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.