MCP1755ST-1802E/MC (DFN-8-EP(2x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP1755ST-1802E/MC

MICROCHIPDFN-8-EP(2x3) · 9 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP1755ST-1802E/MC (DFN-8-EP(2x3))1V OUT2NC3NC4GND5NC9EP8V IN7NC6NCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
987654321E=2.00mm · Pitch e=0.50mmD=3.00mm-3-2-1012343210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 2.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1V OUTI/OMultiplexed I/O & Peripheral Pin V OUT (General)
2NCI/OMultiplexed I/O & Peripheral Pin NC (General)
3NCI/OMultiplexed I/O & Peripheral Pin NC (General)
4GNDGNDGround Reference Pin (GND)
5NCI/OMultiplexed I/O & Peripheral Pin NC (General)
6NCI/OMultiplexed I/O & Peripheral Pin NC (General)
7NCI/OMultiplexed I/O & Peripheral Pin NC (General)
8V INI/OMultiplexed I/O & Peripheral Pin V IN (General)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 V OUT
I/O
Multiplexed I/O & Peripheral Pin V OUT (General)
Design note: Regulated Voltage Output
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 15 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) - 4. Package Dimensions (D×E×A)
DFN-8-EP(2x3) · 2.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (15 figures · Page 1/2)
Showing 1–12 of 15 uncropped original figures for MCP1755
P1 · p01_fig01376×200px
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) — Features:
Features:
P2 · p02_fig011733×1126px
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) — GND
GND
P2 · p02_fig021513×471px
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) — Package Types - MCP1755S
Package Types - MCP1755S
P2 · p02_fig031473×575px
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) — GND VIN
GND VIN
P2 · p02_fig01P2
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P4 · p04_fig011581×615px
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) — Typical Application Circuits
Typical Application Circuits
P21 · p21_fig011777×586px
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) — FIGURE 5-1: Typical Application Circuit. 5.1.1 APPLICATION INPUT CONDITIONS
FIGURE 5-1: Typical Application Circuit. 5.1.1 APPLICATION INPUT CONDITIONS
P21 · p21_fig021777×1629px
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) — FIGURE 5-1: Typical Application Circuit. 5.1.1 APPLICATION INPUT CONDITIONS
FIGURE 5-1: Typical Application Circuit. 5.1.1 APPLICATION INPUT CONDITIONS
P21 · p21_fig02P21
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) — Datasheet Page 21 (p21_fig02)
Datasheet Page 21 (p21_fig02)
P25 · p25_fig041777×1298px
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) —  2012-2021 Microchip Technology Inc. DS20005160B-page 25 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for custo
 2012-2021 Microchip Technology Inc. DS20005160B-page 25 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for custo
P32 · p32_fig011778×2735px
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) — MCP1755/MCP1755S | DS20005160B-page 32  2012-2021 Microchip Technology Inc. | Microchip Technology Drawing C04-091-OT Rev F Sheet 2 of 2 | For the most current package drawings, please see the Microchip Packaging Specification located at h
MCP1755/MCP1755S | DS20005160B-page 32  2012-2021 Microchip Technology Inc. | Microchip Technology Drawing C04-091-OT Rev F Sheet 2 of 2 | For the most current package drawings, please see the Microchip Packaging Specification located at h
P25 · p25_fig01All Packages in PDF
MCP1755ST-1802E/MC (DFN-8-EP(2x3)) — 5-Lead SOT-23 (MCP1755 only)
5-Lead SOT-23 (MCP1755 only)
Page 1 / 2 (15 extracted figures)

Technical Specifications & Part Details (MCP1755ST-1802E/MC)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP1755ST-1802E/MC (DFN-8-EP(2x3)) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 2.00 × 0.80 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 3.6V to 16.0V supply operation across -40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
3.6V to 16.0V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 2.00 × 0.80 mm (A1=0.03 mm)
Package family: DFN (DFN-8-EP(2x3))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 1.50×1.50mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (DFN-8-EP(2x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.80mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 0.75 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DFN-8-EP(2x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP1755ST-1802E/MC (DFN-8-EP(2x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP1755ST-1802E/MC (DFN-8-EP(2x3))?

Manufactured by MICROCHIP, the MCP1755ST-1802E/MC is housed in a DFN-8-EP(2x3) package with 9 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 3.6V to 16.0V. Key pins include: 1 (V OUT: Multiplexed I/O & Peripheral Pin V OUT (General)), 2 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 3 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 4 (GND: Ground Reference Pin (GND)), 5 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 6 (NC: Multiplexed I/O & Peripheral Pin NC (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP1755ST-1802E/MC?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP1755ST-1802E/MC (DFN-8-EP(2x3)) has a nominal body envelope of 2.00 × 3.00 mm, pitch e = 0.50 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 1.50 × 1.50 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP1755ST-1802E/MC?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP1755ST-1802E/MC (MICROCHIP, DFN-8-EP(2x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & MCP1755 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1V OUTDigital_IOSignal terminal V OUT (I/O, 3.6V to 16.0V domain). Multiplexed alternate functions: V OUT. Supported peripheral buses: General.
2NCNCSignal terminal NC (I/O, 3.6V to 16.0V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
3NCNCSignal terminal NC (I/O, 3.6V to 16.0V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5NCNCSignal terminal NC (I/O, 3.6V to 16.0V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
6NCNCSignal terminal NC (I/O, 3.6V to 16.0V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
7NCNCSignal terminal NC (I/O, 3.6V to 16.0V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
8V INDigital_IOSignal terminal V IN (I/O, 3.6V to 16.0V domain). Multiplexed alternate functions: V IN. Supported peripheral buses: General.
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.