MCP1612T-ADJI/MF (DFN-8-EP(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP1612T-ADJI/MF

MICROCHIPDFN-8-EP(3x3) · 9 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP1612T-ADJI/MF (DFN-8-EP(3x3))1V IN2V CC3SHDN4COMP5FB9EP8L X7P GND6A GNDGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
987654321E=3.00mm · Pitch e=0.65mmD=3.00mm-4-3-2-1012343210-1-2-3mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1V INI/OMultiplexed I/O & Peripheral Pin V IN (General)
2V CCI/OMultiplexed I/O & Peripheral Pin V CC (General)
3SHDNI/OMultiplexed I/O & Peripheral Pin SHDN (General)
4COMPI/OMultiplexed I/O & Peripheral Pin COMP (General)
5FBI/OMultiplexed I/O & Peripheral Pin FB (General)
6A GNDGNDGround Reference Pin (A GND)
7P GNDGNDGround Reference Pin (P GND)
8L XI/OMultiplexed I/O & Peripheral Pin L X (General)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 V IN
I/O
Multiplexed I/O & Peripheral Pin V IN (General)
Design note: Input Voltage Pin
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 12 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) - 4. Package Dimensions (D×E×A)
DFN-8-EP(3x3) · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (12 figures · Page 1/1)
Showing 1–12 of 12 uncropped original figures for MCP1612
P1 · p01_fig01867×470px
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) — Additional features integrated into the MCP1612 include shutdown capability, soft-start, UVLO, overcurrent and overtemperature protection. | Package Types | 8-Lead DFN | 1 | 2 | 3 | 4 | 8 | 7 | 6 | 5 | VCC | SHDN | COMP | VIN | PGND | LX |
Additional features integrated into the MCP1612 include shutdown capability, soft-start, UVLO, overcurrent and overtemperature protection. | Package Types | 8-Lead DFN | 1 | 2 | 3 | 4 | 8 | 7 | 6 | 5 | VCC | SHDN | COMP | VIN | PGND | LX |
P2 · p02_fig011575×1874px
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) — Functional Block Diagram
Functional Block Diagram
P3 · p03_fig011581×874px
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) — Typical Application Circuit
Typical Application Circuit
P3 · p03_fig01P3
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) — Datasheet Page 3 (p03_fig01)
Datasheet Page 3 (p03_fig01)
P11 · p11_fig011581×873px
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) — FIGURE 5-1: Typical Application Circuit. 5.1 Typical Applications
FIGURE 5-1: Typical Application Circuit. 5.1 Typical Applications
P13 · p13_fig011778×1248px
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) — VESRRIPPLE = 8 m x 165 mA
VESRRIPPLE = 8 m x 165 mA
P13 · p13_fig01P13
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) — Datasheet Page 13 (p13_fig01)
Datasheet Page 13 (p13_fig01)
P14 · p14_fig011429×1136px
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) — MCP1612
MCP1612
P14 · p14_fig021777×751px
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) — DS21921C-page 14  2004-2013 Microchip Technology Inc. | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer
DS21921C-page 14  2004-2013 Microchip Technology Inc. | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer
P14 · p14_fig01P14
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) — Datasheet Page 14 (p14_fig01)
Datasheet Page 14 (p14_fig01)
P15 · p15_fig011638×1985px
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) — See ASME Y14.5M
See ASME Y14.5M
P16 · p16_fig011653×1751px
MCP1612T-ADJI/MF (DFN-8-EP(3x3)) — BSC: Basic Dimension. Theoretically exact value shown without tolerances.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.

Technical Specifications & Part Details (MCP1612T-ADJI/MF)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP1612T-ADJI/MF (DFN-8-EP(3x3)) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.90 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 2.7V to 5.5V supply operation across -40°C to +85°C with integrated USB, PWM interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1.4 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
1A
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.90 mm (A1=0.03 mm)
Package family: DFN (DFN-8-EP(3x3))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB, PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteEPAD 1.65×2.40mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (DFN-8-EP(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.65mm
Pad Size (W × L)Level B
0.35 × 0.84 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DFN-8-EP(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP1612T-ADJI/MF (DFN-8-EP(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP1612T-ADJI/MF (DFN-8-EP(3x3))?

Manufactured by MICROCHIP, the MCP1612T-ADJI/MF is housed in a DFN-8-EP(3x3) package with 9 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 2.7V to 5.5V. Key pins include: 1 (V IN: Multiplexed I/O & Peripheral Pin V IN (General)), 2 (V CC: Multiplexed I/O & Peripheral Pin V CC (General)), 3 (SHDN: Multiplexed I/O & Peripheral Pin SHDN (General)), 4 (COMP: Multiplexed I/O & Peripheral Pin COMP (General)), 5 (FB: Multiplexed I/O & Peripheral Pin FB (General)), 6 (A GND: Ground Reference Pin (A GND)).

What are the IPC-7351B PCB Footprint dimensions for MCP1612T-ADJI/MF?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP1612T-ADJI/MF (DFN-8-EP(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 1.65 × 2.40 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP1612T-ADJI/MF?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP1612T-ADJI/MF (MICROCHIP, DFN-8-EP(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & MCP1612 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1V INDigital_IOSignal terminal V IN (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: V IN. Supported peripheral buses: General.
2V CCDigital_IOSignal terminal V CC (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: V CC. Supported peripheral buses: General.
3SHDNDigital_IOSignal terminal SHDN (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SHDN. Supported peripheral buses: General.
4COMPDigital_IOSignal terminal COMP (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: COMP. Supported peripheral buses: General.
5FBDigital_IOSignal terminal FB (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: FB. Supported peripheral buses: General.
6A GNDGND0V electrical ground return terminal (A GND) for internal core logic, I/O drivers, and analog sub-blocks.
7P GNDGND0V electrical ground return terminal (P GND) for internal core logic, I/O drivers, and analog sub-blocks.
8L XDigital_IOSignal terminal L X (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: L X. Supported peripheral buses: General.
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.