MCP1256T-E/MF (DFN-10-EP(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MCP1256T-E/MF

MICROCHIPDFN-10-EP(3x3) · 11 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MCP1256T-E/MF (DFN-10-EP(3x3))1PGOOD LBO2SLEEP BYPASS3C2-4C1+5V OUT6C2+11EP10SHDN9GND8C1-7V INGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
1234567891011E=3.00mm · Pitch e=0.65mmD=3.00mm-3-2-1012343210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (11/11)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1PGOOD LBOI/OMultiplexed I/O & Peripheral Pin PGOOD LBO (General)
2SLEEP BYPASSI/OMultiplexed I/O & Peripheral Pin SLEEP BYPASS (General)
3C2-I/OMultiplexed I/O & Peripheral Pin C2- (General)
4C1+I/OMultiplexed I/O & Peripheral Pin C1+ (General)
5V OUTI/OMultiplexed I/O & Peripheral Pin V OUT (General)
6C2+I/OMultiplexed I/O & Peripheral Pin C2+ (General)
7V INI/OMultiplexed I/O & Peripheral Pin V IN (General)
8C1-I/OMultiplexed I/O & Peripheral Pin C1- (General)
9GNDGNDGround Reference Pin (GND)
10SHDNI/OMultiplexed I/O & Peripheral Pin SHDN (General)
11EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 PGOOD LBO
I/O
Multiplexed I/O & Peripheral Pin PGOOD LBO (General)
Design note: Power-Good Indication Open-Drain Output Pin: MCP1256 and MCP1258 Low-Battery Indication Open-Drain Output Pin: MCP1257 and MCP1259
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 11 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MCP1256T-E/MF (DFN-10-EP(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MCP1256T-E/MF (DFN-10-EP(3x3)) - 2. Standard Pinout (Top View)
True package pinout (11 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MCP1256T-E/MF (DFN-10-EP(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MCP1256T-E/MF (DFN-10-EP(3x3)) - 4. Package Dimensions (D×E×A)
DFN-10-EP(3x3) · 3.00×3.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MCP1256T-E/MF (DFN-10-EP(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (11 Pads)Expand ›
6. Application SchematicSCHEMATIC
MCP1256T-E/MF (DFN-10-EP(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (11 figures · Page 1/1)
Showing 1–11 of 11 uncropped original figures for MCP1256
P1 · p01_fig01867×579px
MCP1256T-E/MF (DFN-10-EP(3x3)) — • Pagers • Portable Measurement Instruments • Home Automation Products • PIC® MCU Bias
• Pagers • Portable Measurement Instruments • Home Automation Products • PIC® MCU Bias
P2 · p02_fig011549×1102px
MCP1256T-E/MF (DFN-10-EP(3x3)) — Functional Block Diagram
Functional Block Diagram
P2 · p02_fig021777×1107px
MCP1256T-E/MF (DFN-10-EP(3x3)) — Mode Phase Oscillator Q S1 S2(CE) S3 S4 S5 S6 S7
Mode Phase Oscillator Q S1 S2(CE) S3 S4 S5 S6 S7
P14 · p14_fig011420×725px
MCP1256T-E/MF (DFN-10-EP(3x3)) — Typical Application with Power-Good Indication
Typical Application with Power-Good Indication
P14 · p14_fig021414×725px
MCP1256T-E/MF (DFN-10-EP(3x3)) — FIGURE 6-1: Typical Application Circuits.
FIGURE 6-1: Typical Application Circuits.
P14 · p14_fig01P14
MCP1256T-E/MF (DFN-10-EP(3x3)) — Datasheet Page 14 (p14_fig01)
Datasheet Page 14 (p14_fig01)
P15 · p15_fig011470×1148px
MCP1256T-E/MF (DFN-10-EP(3x3)) — MCP1256/7/8/9 MCP1256 MCP1257 MCP1258 MCP1259
MCP1256/7/8/9 MCP1256 MCP1257 MCP1258 MCP1259
P15 · p15_fig021777×749px
MCP1256T-E/MF (DFN-10-EP(3x3)) —  2006-2013 Microchip Technology Inc. DS21989B-page 15 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer
 2006-2013 Microchip Technology Inc. DS21989B-page 15 | Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer
P15 · p15_fig01P15
MCP1256T-E/MF (DFN-10-EP(3x3)) — Datasheet Page 15 (p15_fig01)
Datasheet Page 15 (p15_fig01)
P16 · p16_fig011561×1723px
MCP1256T-E/MF (DFN-10-EP(3x3)) — 2. Exposed pad varies according to die attach paddle size.
2. Exposed pad varies according to die attach paddle size.
P17 · p17_fig011532×1751px
MCP1256T-E/MF (DFN-10-EP(3x3)) — BSC: Basic Dimension. Theoretically exact value shown without tolerances.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.

Technical Specifications & Part Details (MCP1256T-E/MF)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MCP1256T-E/MF (DFN-10-EP(3x3)) is a 10-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.90 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 1.8V to 3.6V supply operation across -40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
650 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
100 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.90 mm (A1=0.03 mm)
Package family: DFN (DFN-10-EP(3x3))
Pin Count & Lead PitchN / e
10 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol11 auto-grouped pins
OK
IPC-7351B Land Pattern11 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteEPAD 3.20×2.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (DFN-10-EP(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.65mm
Pad Size (W × L)Level B
0.36 × 0.81 mm
Pins / Total PadsTopology
11P / 11Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DFN-10-EP(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MCP1256T-E/MF (DFN-10-EP(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MCP1256T-E/MF (DFN-10-EP(3x3))?

Manufactured by MICROCHIP, the MCP1256T-E/MF is housed in a DFN-10-EP(3x3) package with 11 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 1.8V to 3.6V. Key pins include: 1 (PGOOD LBO: Multiplexed I/O & Peripheral Pin PGOOD LBO (General)), 2 (SLEEP BYPASS: Multiplexed I/O & Peripheral Pin SLEEP BYPASS (General)), 3 (C2-: Multiplexed I/O & Peripheral Pin C2- (General)), 4 (C1+: Multiplexed I/O & Peripheral Pin C1+ (General)), 5 (V OUT: Multiplexed I/O & Peripheral Pin V OUT (General)), 6 (C2+: Multiplexed I/O & Peripheral Pin C2+ (General)).

What are the IPC-7351B PCB Footprint dimensions for MCP1256T-E/MF?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MCP1256T-E/MF (DFN-10-EP(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.65 mm, and 11 copper pads plus a central exposed thermal pad (EPAD) of 3.20 × 2.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MCP1256T-E/MF?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MCP1256T-E/MF (MICROCHIP, DFN-10-EP(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (11 pins) & MCP1256 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1PGOOD LBOOpen_DrainSignal terminal PGOOD LBO (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: PGOOD LBO. Supported peripheral buses: General.
2SLEEP BYPASSDigital_IOSignal terminal SLEEP BYPASS (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: SLEEP BYPASS. Supported peripheral buses: General.
3C2-Digital_IOSignal terminal C2- (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: C2-. Supported peripheral buses: General.
4C1+Digital_IOSignal terminal C1+ (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: C1+. Supported peripheral buses: General.
5V OUTDigital_IOSignal terminal V OUT (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: V OUT. Supported peripheral buses: General.
6C2+Digital_IOSignal terminal C2+ (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: C2+. Supported peripheral buses: General.
7V INDigital_IOSignal terminal V IN (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: V IN. Supported peripheral buses: General.
8C1-Digital_IOSignal terminal C1- (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: C1-. Supported peripheral buses: General.
9GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
10SHDNDigital_IOSignal terminal SHDN (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: SHDN. Supported peripheral buses: General.
11EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.