dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) — Symbol, Footprint IPC-7351B & 3D STEP Model

dsPIC33FJ16GS502T-E/MX

MICROCHIPUQFN-28-EP(6x6) · 29 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6))1AN2/CMP1C/CM2IO233V34NC5VSS6IO37NC8IO09IO410VDD11PGED3/RP8(1)12IO713TDO/RP5(1)/C14IO1615IO1729EP28AN1/CMP1B/RA27AN0/CMP1A/RA26MCLR#25AVDD24AVSS23PWM1L/RA322PWM1H/RA421IO1020IO919IO2018IO1917VSS16VCAPGrid Pitch = 2.54mm (IEEE-315)-20.3-15.2-10.2-5.105.110.215.220.325.420.315.210.25.10-5.1-10.2-15.2-20.3-25.4mm
2. 2D FOOTPRINT
292929292928272625242322212019181716151413121110987654321E=6.00mm · Pitch e=0.65mmD=6.00mm-5-4-3-2-1012345543210-1-2-3-4-5mm
3. 3D CAD MODEL
Package Body: 6.00mm × 6.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (29/29)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1AN2/CMP1C/CMP2A/RA2I/OMultiplexed I/O & Peripheral Pin AN2/CMP1C/CMP2A/RA2 (General)
2IO2I/OGeneral Purpose Digital I/O Pin IO2
33V3Power3.3V Main Power Supply Rail (3.0V ~ 3.6V)
4NCNCNo Connect (Leave Floating)
5VSSGNDGround Reference Pin (VSS)
6IO3I/OGPIO3 / RTC_GPIO3 / TOUCH3 / ADC1_CH2 (JTAG Source Strap)
7NCNCNo Connect (Leave Floating)
8IO0I/OGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9IO4I/OGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10VDDPowerPower Supply Input (VDD — 3.0V to 3.6V)
11PGED3/RP8(1)/CN8/RB8I/OMultiplexed I/O & Peripheral Pin PGED3/RP8(1)/CN8/RB8 (General)
12IO7I/OGPIO7 / RTC_GPIO7 / TOUCH7 / ADC1_CH6
13TDO/RP5(1)/CN5/RB5I/OMultiplexed I/O & Peripheral Pin TDO/RP5(1)/CN5/RB5 (General)
14IO16I/OGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15IO17I/OGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16VCAPI/OMultiplexed I/O & Peripheral Pin VCAP (General)
17VSSGNDGround Reference Pin (VSS)
18IO19I/OGPIO19 / RTC_GPIO19 / USB_D- / U1RTS / ADC2_CH8
19IO20I/OGPIO20 / RTC_GPIO20 / USB_D+ / U1CTS / ADC2_CH9
20IO9I/OGPIO9 / RTC_GPIO9 / TOUCH9 / ADC1_CH8 / FSPIHD
21IO10I/OGPIO10 / RTC_GPIO10 / TOUCH10 / ADC1_CH9 / FSPICS0
22PWM1H/RA4I/OMultiplexed I/O & Peripheral Pin PWM1H/RA4 (PWM)
23PWM1L/RA3I/OMultiplexed I/O & Peripheral Pin PWM1L/RA3 (PWM)
24AVSSGNDGround Reference Pin (AVSS)
25AVDDPowerPower Supply Input (AVDD — 3.0V to 3.6V)
26MCLR#I/OMultiplexed I/O & Peripheral Pin MCLR# (General)
27AN0/CMP1A/RA0I/OMultiplexed I/O & Peripheral Pin AN0/CMP1A/RA0 (General)
28AN1/CMP1B/RA1I/OMultiplexed I/O & Peripheral Pin AN1/CMP1B/RA1 (General)
29EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 AN2/CMP1C/CMP2A/RA2
I/O
Multiplexed I/O & Peripheral Pin AN2/CMP1C/CMP2A/RA2 (General)
Design note: Signal terminal AN2/CMP1C/CMP2A/RA2 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN2/CMP1C/CMP2A/RA2. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 11 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) - 2. Standard Pinout (Top View)
True package pinout (29 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) - 4. Package Dimensions (D×E×A)
UQFN-28-EP(6x6) · 6.00×6.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) - 5. Recommended Land Pattern
IPC-7351B Footprint (33 Pads)Expand ›
6. Application SchematicSCHEMATIC
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (11 figures · Page 1/1)
Showing 1–11 of 11 uncropped original figures for DSPIC33FJ16G
P1 · p01_fig01377×200px
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) — 16-Bit Digital Signal Controllers (up to 16-Kbyte Flash and up to 2-Kbyte SRAM) with High-Speed PWM, ADC and Comparators
16-Bit Digital Signal Controllers (up to 16-Kbyte Flash and up to 2-Kbyte SRAM) with High-Speed PWM, ADC and Comparators
P18 · p18_fig011687×2248px
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) — FIGURE 1-1: dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 BLOCK DIAGRAM PSV & Table Data Access Control Block
FIGURE 1-1: dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 BLOCK DIAGRAM PSV & Table Data Access Control Block
P83 · p83_fig011778×960px
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) — Flash memory can be programmed in two ways:
Flash memory can be programmed in two ways:
P83 · p83_fig021777×967px
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) — FIGURE 5-1: ADDRESSING FOR TABLE REGISTERS
FIGURE 5-1: ADDRESSING FOR TABLE REGISTERS
P84 · p84_fig01867×541px
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) — TRW 11064 Cycles 7.37 MHz 1 0.05 -   1 0.00375 -     --------------------------------------------------------------------------------------------- 1.586ms = =
TRW 11064 Cycles 7.37 MHz 1 0.05 -   1 0.00375 -     --------------------------------------------------------------------------------------------- 1.586ms = =
P84 · p84_fig02867×429px
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) — All of the Table Write operations are single-word writes (two instruction cycles) because only the buffers are written. A programming cycle is required for programming each row.
All of the Table Write operations are single-word writes (two instruction cycles) because only the buffers are written. A programming cycle is required for programming each row.
P270 · p270_fig01867×881px
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) — FIGURE 21-1: CONNECTIONS FOR THE ON-CHIP VOLTAGE REGULATOR(1,2,3)
FIGURE 21-1: CONNECTIONS FOR THE ON-CHIP VOLTAGE REGULATOR(1,2,3)
P270 · p270_fig01P270
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) — Datasheet Page 270 (p270_fig01)
Datasheet Page 270 (p270_fig01)
P351 · p351_fig011777×2585px
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) — dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
P371 · p371_fig011776×2225px
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) — dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
P371 · p371_fig01P371
dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) — Datasheet Page 371 (p371_fig01)
Datasheet Page 371 (p371_fig01)

Technical Specifications & Part Details (dsPIC33FJ16GS502T-E/MX)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) is a 28-pin standard electronic & interconnect component featuring a 6.00 × 6.00 × 0.60 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 3.0V to 3.6V supply operation across -40°C to +85°C with integrated UART, SPI, I2C, ADC, DAC, PWM, JTAG / SWD, IrDA, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
3.0V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
6.00 × 6.00 × 0.60 mm (A1=0.03 mm)
Package family: QFN (UQFN-28-EP(6x6))
Pin Count & Lead PitchN / e
28 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, ADC, DAC, PWM, JTAG / SWD, IrDA, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol29 auto-grouped pins
OK
IPC-7351B Land Pattern33 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteEPAD 4.40×4.40mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (UQFN-28-EP(6x6))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
6.00 × 6.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.60mm · e=0.65mm
Pad Size (W × L)Level B
0.35 × 0.90 mm
Pins / Total PadsTopology
29P / 33Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
UQFN-28-EP(6x6)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6))?

Manufactured by MICROCHIP, the dsPIC33FJ16GS502T-E/MX is housed in a UQFN-28-EP(6x6) package with 29 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 3.0V to 3.6V. Key pins include: 1 (AN2/CMP1C/CMP2A/RA2: Multiplexed I/O & Peripheral Pin AN2/CMP1C/CMP2A/RA2 (General)), 2 (IO2: General Purpose Digital I/O Pin IO2), 3 (3V3: 3.3V Main Power Supply Rail (3.0V ~ 3.6V)), 4 (NC: No Connect (Leave Floating)), 5 (VSS: Ground Reference Pin (VSS)), 6 (IO3: GPIO3 / RTC_GPIO3 / TOUCH3 / ADC1_CH2 (JTAG Source Strap)).

What are the IPC-7351B PCB Footprint dimensions for dsPIC33FJ16GS502T-E/MX?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), dsPIC33FJ16GS502T-E/MX (UQFN-28-EP(6x6)) has a nominal body envelope of 6.00 × 6.00 mm, pitch e = 0.65 mm, and 33 copper pads plus a central exposed thermal pad (EPAD) of 4.40 × 4.40 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for dsPIC33FJ16GS502T-E/MX?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for dsPIC33FJ16GS502T-E/MX (MICROCHIP, UQFN-28-EP(6x6)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (29 pins) & DSPIC33FJ16G Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1AN2/CMP1C/CMP2A/RA2Digital_IOSignal terminal AN2/CMP1C/CMP2A/RA2 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN2/CMP1C/CMP2A/RA2. Supported peripheral buses: General.
2IO2Digital_IOGeneral Purpose Digital I/O Pin IO2
33V3Power_In3.3V Main Power Supply Rail (3.0V ~ 3.6V)
4NCNo_ConnectNo Connect (Leave Floating)
5VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
6IO3Digital_IOGPIO3 / RTC_GPIO3 / TOUCH3 / ADC1_CH2 (JTAG Source Strap)
7NCNo_ConnectNo Connect (Leave Floating)
8IO0Digital_IOGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9IO4Digital_IOGPIO4 / RTC_GPIO4 / TOUCH4 / ADC1_CH3
10VDDPower_InPrimary positive power supply input (VDD) operating in the 3.0V to 3.6V domain (Max rating: 3.6V).
11PGED3/RP8(1)/CN8/RB8Digital_IOSignal terminal PGED3/RP8(1)/CN8/RB8 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PGED3/RP8(1)/CN8/RB8. Supported peripheral buses: General.
12IO7Digital_IOGPIO7 / RTC_GPIO7 / TOUCH7 / ADC1_CH6
13TDO/RP5(1)/CN5/RB5Digital_IOSignal terminal TDO/RP5(1)/CN5/RB5 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: TDO/RP5(1)/CN5/RB5. Supported peripheral buses: General.
14IO16Digital_IOGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15IO17Digital_IOGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16VCAPDigital_IOSignal terminal VCAP (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: VCAP. Supported peripheral buses: General.
17VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
18IO19Digital_IOGPIO19 / RTC_GPIO19 / USB_D- / U1RTS / ADC2_CH8
19IO20Digital_IOGPIO20 / RTC_GPIO20 / USB_D+ / U1CTS / ADC2_CH9
20IO9Digital_IOGPIO9 / RTC_GPIO9 / TOUCH9 / ADC1_CH8 / FSPIHD
21IO10Digital_IOGPIO10 / RTC_GPIO10 / TOUCH10 / ADC1_CH9 / FSPICS0
22PWM1H/RA4Digital_IOSignal terminal PWM1H/RA4 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PWM1H/RA4. Supported peripheral buses: PWM.
23PWM1L/RA3Digital_IOSignal terminal PWM1L/RA3 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: PWM1L/RA3. Supported peripheral buses: PWM.
24AVSSGND0V electrical ground return terminal (AVSS) for internal core logic, I/O drivers, and analog sub-blocks.
25AVDDPower_InPrimary positive power supply input (AVDD) operating in the 3.0V to 3.6V domain (Max rating: 3.6V).
26MCLR#Digital_IOSignal terminal MCLR# (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: MCLR#. Supported peripheral buses: General.
27AN0/CMP1A/RA0Digital_IOSignal terminal AN0/CMP1A/RA0 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN0/CMP1A/RA0. Supported peripheral buses: General.
28AN1/CMP1B/RA1Digital_IOSignal terminal AN1/CMP1B/RA1 (I/O, 3.0V to 3.6V domain). Multiplexed alternate functions: AN1/CMP1B/RA1. Supported peripheral buses: General.
29EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.