MIC69303YML-TR (DFN-12-EP(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC69303YML-TR

MICROCHIPDFN-12-EP(4x4) · 13 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC69303YML-TR (DFN-12-EP(4x4))1EN2IN3GND4OUT5FLG6IN7OUT13GND12FLG11ADJ10NC9OUT8NCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.815.210.25.10-5.1-10.2-15.2mm
2. 2D FOOTPRINT
12345678910111213E=4.00mm · Pitch e=0.50mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (13/13)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1ENISystem Enable & Hardware Reset (EN)
2INI/OMultiplexed I/O & Peripheral Pin IN (General)
3GNDGNDGround Reference Pin (GND)
4OUTPowerRegulated Power Output (OUT — 1.65V to 5.5V)
5FLGI/OMultiplexed I/O & Peripheral Pin FLG (General)
6INI/OMultiplexed I/O & Peripheral Pin IN (General)
7OUTPowerRegulated Power Output (OUT — 1.65V to 5.5V)
8NCI/OMultiplexed I/O & Peripheral Pin NC (General)
9OUTPowerRegulated Power Output (OUT — 1.65V to 5.5V)
10NCI/OMultiplexed I/O & Peripheral Pin NC (General)
11ADJI/OMultiplexed I/O & Peripheral Pin ADJ (General)
12FLGI/OMultiplexed I/O & Peripheral Pin FLG (General)
13GNDGNDGround Reference Pin (GND)
PIN 1 EN
I
System Enable & Hardware Reset (EN)
Design note: Enable (Input): CMOS compatible input. Logic high = enable, logic low = shutdown. Do not leave pin floating.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 13 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC69303YML-TR (DFN-12-EP(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC69303YML-TR (DFN-12-EP(4x4)) - 2. Standard Pinout (Top View)
True package pinout (13 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC69303YML-TR (DFN-12-EP(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC69303YML-TR (DFN-12-EP(4x4)) - 4. Package Dimensions (D×E×A)
DFN-12-EP(4x4) · 4.00×4.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC69303YML-TR (DFN-12-EP(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (13 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC69303YML-TR (DFN-12-EP(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (13 figures · Page 1/2)
Showing 1–12 of 13 uncropped original figures for MIC69303
P1 · p01_fig01843×318px
MIC69303YML-TR (DFN-12-EP(4x4)) — *Error Flag Output MIC69303 only
*Error Flag Output MIC69303 only
P1 · p01_fig021042×326px
MIC69303YML-TR (DFN-12-EP(4x4)) — *Error Flag Output MIC69303 only
*Error Flag Output MIC69303 only
P1 · p01_fig02P1
MIC69303YML-TR (DFN-12-EP(4x4)) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P2 · p02_fig01P2
MIC69303YML-TR (DFN-12-EP(4x4)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P3 · p03_fig01403×364px
MIC69303YML-TR (DFN-12-EP(4x4)) — (Adjustable Voltage with Flag) Pin Description
(Adjustable Voltage with Flag) Pin Description
P11 · p11_fig011788×793px
MIC69303YML-TR (DFN-12-EP(4x4)) — Micrel, Inc. MIC69301/2/3 MIC69301 MIC69302 MIC69303
Micrel, Inc. MIC69301/2/3 MIC69301 MIC69302 MIC69303
P2 · p02_fig01All Packages in PDF
MIC69303YML-TR (DFN-12-EP(4x4)) — Pin Configuration
Pin Configuration
P2 · p02_fig02All Packages in PDF
MIC69303YML-TR (DFN-12-EP(4x4)) — 5-Pin TO-263 (U) (Fixed Voltage with Flag)
5-Pin TO-263 (U) (Fixed Voltage with Flag)
P2 · p02_fig03All Packages in PDF
MIC69303YML-TR (DFN-12-EP(4x4)) — 5-Pin S-PAK (R) (Adjustable Voltage)
5-Pin S-PAK (R) (Adjustable Voltage)
P2 · p02_fig04All Packages in PDF
MIC69303YML-TR (DFN-12-EP(4x4)) — 5-Pin S-PAK (R) (Fixed Voltage with Flag)
5-Pin S-PAK (R) (Fixed Voltage with Flag)
P2 · p02_fig05All Packages in PDF
MIC69303YML-TR (DFN-12-EP(4x4)) — 8-Pin ePad SOIC (ME)
8-Pin ePad SOIC (ME)
P2 · p02_fig06All Packages in PDF
MIC69303YML-TR (DFN-12-EP(4x4)) — 8-Pin ePad SOIC (ME) (Fixed Voltage with Flag)
8-Pin ePad SOIC (ME) (Fixed Voltage with Flag)
Page 1 / 2 (13 extracted figures)

Technical Specifications & Part Details (MIC69303YML-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC69303YML-TR (DFN-12-EP(4x4)) is a 12-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 0.80 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.65V to 5.5V supply operation across 40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
1.65V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 0.80 mm (A1=0.03 mm)
Package family: DFN (DFN-12-EP(4x4))
Pin Count & Lead PitchN / e
12 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol13 auto-grouped pins
OK
IPC-7351B Land Pattern13 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 3.00×2.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (DFN-12-EP(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.80mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.70 mm
Pins / Total PadsTopology
13P / 13Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DFN-12-EP(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC69303YML-TR (DFN-12-EP(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC69303YML-TR (DFN-12-EP(4x4))?

Manufactured by MICROCHIP, the MIC69303YML-TR is housed in a DFN-12-EP(4x4) package with 13 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.65V to 5.5V. Key pins include: 1 (EN: System Enable & Hardware Reset (EN)), 2 (IN: Multiplexed I/O & Peripheral Pin IN (General)), 3 (GND: Ground Reference Pin (GND)), 4 (OUT: Regulated Power Output (OUT — 1.65V to 5.5V)), 5 (FLG: Multiplexed I/O & Peripheral Pin FLG (General)), 6 (IN: Multiplexed I/O & Peripheral Pin IN (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC69303YML-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC69303YML-TR (DFN-12-EP(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.50 mm, and 13 copper pads plus a central exposed thermal pad (EPAD) of 3.00 × 2.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC69303YML-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC69303YML-TR (MICROCHIP, DFN-12-EP(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (13 pins) & MIC69303 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1ENDigital_IOChip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
2INDigital_IOSignal terminal IN (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: IN. Supported peripheral buses: General.
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4OUTPower_OutRegulated power output rail (OUT) operating in the 1.65V to 5.5V domain (Max rating: 5.5V).
5FLGDigital_IOSignal terminal FLG (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: FLG. Supported peripheral buses: General.
6INDigital_IOSignal terminal IN (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: IN. Supported peripheral buses: General.
7OUTPower_OutRegulated power output rail (OUT) operating in the 1.65V to 5.5V domain (Max rating: 5.5V).
8NCNCSignal terminal NC (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
9OUTPower_OutRegulated power output rail (OUT) operating in the 1.65V to 5.5V domain (Max rating: 5.5V).
10NCNCSignal terminal NC (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
11ADJDigital_IOSignal terminal ADJ (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: ADJ. Supported peripheral buses: General.
12FLGDigital_IOSignal terminal FLG (I/O, 1.65V to 5.5V domain). Multiplexed alternate functions: FLG. Supported peripheral buses: General.
13GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.