MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC5528-3.3YMX-TR

MICROCHIPXDFN-6-EP(1.2x1.2) · 7 Pins · Pitch 0.40mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2))1VOUT2VOUT3GND4EN7EP6VIN5NCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
1234567E=1.20mm · Pitch e=0.40mmD=1.20mm-2-1012210-1-2mm
3. 3D CAD MODEL
Package Body: 1.20mm × 1.20mm · Pitch: 0.40mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (7/7)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VOUTPowerRegulated Power Output (VOUT — 2.5V to 5.5V)
2VOUTPowerRegulated Power Output (VOUT — 2.5V to 5.5V)
3GNDGNDGround Reference Pin (GND)
4ENISystem Enable & Hardware Reset (EN)
5NCI/OMultiplexed I/O & Peripheral Pin NC (General)
6VINPowerPower Supply Input (VIN — 2.5V to 5.5V)
7EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 VOUT
Power
Regulated Power Output (VOUT — 2.5V to 5.5V)
Design note: Output Voltage. When disabled, the MIC5528 switches in an internal 25Ω load to discharge the external capacitors.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 17 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) - 2. Standard Pinout (Top View)
True package pinout (7 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) - 4. Package Dimensions (D×E×A)
XDFN-6-EP(1.2x1.2) · 1.20×1.20mm · Pitch 0.40mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) - 5. Recommended Land Pattern
IPC-7351B Footprint (7 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (17 figures · Page 1/2)
Showing 1–12 of 17 uncropped original figures for MIC5528
P1 · p01_fig01376×200px
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) — High Performance 500 mA LDO in Thin and Extra Thin DFN Packages
High Performance 500 mA LDO in Thin and Extra Thin DFN Packages
P1 · p01_fig02703×609px
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) — Package Types | MIC5528 6-Lead Thin DFN (MT) (Top View) | 1 | 2 | 3 4 | 5 | 6 | EP | VOUT | VOUT | GND | VIN | NC | EN
Package Types | MIC5528 6-Lead Thin DFN (MT) (Top View) | 1 | 2 | 3 4 | 5 | 6 | EP | VOUT | VOUT | GND | VIN | NC | EN
P1 · p01_fig03550×558px
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) — MIC5528 6-Lead Extra Thin DFN (MX) (Top View) | 1 | 2 | 3 4 | 5 | 6 | EP | VOUT | VOUT | GND | VIN | NC | EN
MIC5528 6-Lead Extra Thin DFN (MX) (Top View) | 1 | 2 | 3 4 | 5 | 6 | EP | VOUT | VOUT | GND | VIN | NC | EN
P2 · p02_fig011495×596px
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) — Typical Application Circuit
Typical Application Circuit
P2 · p02_fig021543×622px
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) — Functional Block Diagram
Functional Block Diagram
P2 · p02_fig01P2
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P8 · p08_fig011777×803px
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) — FIGURE 2-13: Auto-Discharge (No Load).
FIGURE 2-13: Auto-Discharge (No Load).
P8 · p08_fig02581×447px
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) — FIGURE 2-16: Power Supply Rejection Ratio. 70 60 50 40 30
FIGURE 2-16: Power Supply Rejection Ratio. 70 60 50 40 30
P8 · p08_fig031777×611px
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) — FIGURE 2-16: Power Supply Rejection Ratio. 70 60 50 40 30
FIGURE 2-16: Power Supply Rejection Ratio. 70 60 50 40 30
P8 · p08_fig04566×433px
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) — FIGURE 2-17: Ground Current vs. Input Voltage.
FIGURE 2-17: Ground Current vs. Input Voltage.
P8 · p08_fig051777×614px
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) — FIGURE 2-17: Ground Current vs. Input Voltage.
FIGURE 2-17: Ground Current vs. Input Voltage.
P8 · p08_fig06567×435px
MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) — FIGURE 2-18: Ground Current vs. Output Current.
FIGURE 2-18: Ground Current vs. Output Current.
Page 1 / 2 (17 extracted figures)

Technical Specifications & Part Details (MIC5528-3.3YMX-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) is a 6-pin standard electronic & interconnect component featuring a 1.20 × 1.20 × 0.85 mm mechanical envelope (lead pitch e = 0.40 mm). Rated for 2.5V to 5.5V supply operation across 40°C to 125°C with integrated CAN interfaces.
Operating Supply VoltageV_CC / V_DD
2.5V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to 125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
38 µA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
1.20 × 1.20 × 0.85 mm (A1=0.03 mm)
Package family: DFN (XDFN-6-EP(1.2x1.2))
Pin Count & Lead PitchN / e
6 Pins | Pitch e = 0.40 mm (15.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
CAN
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol7 auto-grouped pins
OK
IPC-7351B Land Pattern7 pads · Pitch 0.40mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (XDFN-6-EP(1.2x1.2))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
1.20 × 1.20 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.40mm
Pad Size (W × L)Level B
0.22 × 0.34 mm
Pins / Total PadsTopology
7P / 7Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
XDFN-6-EP(1.2x1.2)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2))?

Manufactured by MICROCHIP, the MIC5528-3.3YMX-TR is housed in a XDFN-6-EP(1.2x1.2) package with 7 pins and a 0.40 mm lead pitch, supporting a VCC supply range of 2.5V to 5.5V. Key pins include: 1 (VOUT: Regulated Power Output (VOUT — 2.5V to 5.5V)), 2 (VOUT: Regulated Power Output (VOUT — 2.5V to 5.5V)), 3 (GND: Ground Reference Pin (GND)), 4 (EN: System Enable & Hardware Reset (EN)), 5 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 6 (VIN: Power Supply Input (VIN — 2.5V to 5.5V)).

What are the IPC-7351B PCB Footprint dimensions for MIC5528-3.3YMX-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC5528-3.3YMX-TR (XDFN-6-EP(1.2x1.2)) has a nominal body envelope of 1.20 × 1.20 mm, pitch e = 0.40 mm, and 7 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC5528-3.3YMX-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC5528-3.3YMX-TR (MICROCHIP, XDFN-6-EP(1.2x1.2)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (7 pins) & MIC5528 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VOUTPower_OutRegulated power output rail (VOUT) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).
2VOUTPower_OutRegulated power output rail (VOUT) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).
3GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
4ENDigital_IOChip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
5NCNCSignal terminal NC (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
6VINPower_InPrimary positive power supply input (VIN) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).
7EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.