MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC5398-P4YMX-TR

MICROCHIPX2DFN-8(1.2x1.6) · 9 Pins · Pitch 0.40mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6))1GND2VOUT13VOUT24GND5EN29EP8EN17VIN16VIN2Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=1.60mm · Pitch e=0.40mmD=1.20mm-3-2-10123210-1-2mm
3. 3D CAD MODEL
Package Body: 1.60mm × 1.20mm · Pitch: 0.40mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1GNDGNDGround Reference Pin (GND)
2VOUT1PowerPower Supply Input (VOUT1 — 2.5V to 5.5V)
3VOUT2PowerPower Supply Input (VOUT2 — 2.5V to 5.5V)
4GNDGNDGround Reference Pin (GND)
5EN2I/OMultiplexed I/O & Peripheral Pin EN2 (General)
6VIN2PowerPower Supply Input (VIN2 — 2.5V to 5.5V)
7VIN1PowerPower Supply Input (VIN1 — 2.5V to 5.5V)
8EN1I/OMultiplexed I/O & Peripheral Pin EN1 (General)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 GND
GND
Ground Reference Pin (GND)
Design note: Ground.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 13 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) - 4. Package Dimensions (D×E×A)
X2DFN-8(1.2x1.6) · 1.60×1.20mm · Pitch 0.40mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (13 figures · Page 1/2)
Showing 1–12 of 13 uncropped original figures for MIC5398
P1 · p01_fig01376×200px
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) — Low-Power Dual 300 mA LDO
Low-Power Dual 300 mA LDO
P1 · p01_fig02568×401px
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) — MIC5396/7/8/9 MIC5396 MIC5397 MIC5398 MIC5399 UDFN 8L, X2DFN 8L (Top View)
MIC5396/7/8/9 MIC5396 MIC5397 MIC5398 MIC5399 UDFN 8L, X2DFN 8L (Top View)
P1 · p01_fig02P1
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P2 · p02_fig011533×527px
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) — Typical Application Schematic
Typical Application Schematic
P2 · p02_fig021513×839px
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) — Functional Block Diagram
Functional Block Diagram
P11 · p11_fig011185×899px
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) — FIGURE 5-1: MIC5396/7/8/9 MIC5396 MIC5397 MIC5398 MIC5399-x.xYMX Typical Application Schematic. TABLE 5-1: BILL OF MATERIALS Item Part Number Manufacturer Description Qty.
FIGURE 5-1: MIC5396/7/8/9 MIC5396 MIC5397 MIC5398 MIC5399-x.xYMX Typical Application Schematic. TABLE 5-1: BILL OF MATERIALS Item Part Number Manufacturer Description Qty.
P11 · p11_fig01P11
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) — Datasheet Page 11 (p11_fig01)
Datasheet Page 11 (p11_fig01)
P13 · p13_fig011777×2375px
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) — MIC5396/7/8/9 MIC5396 MIC5397 MIC5398 MIC5399 | 7.0 PACKAGING INFORMATION | 7.1 Package Marking Information | ●, ▲, ▼Pin one index is identified by a dot, delta up, or delta down (triangle mark). | 3 e | 3 e | Underbar (_) symbol may not be
MIC5396/7/8/9 MIC5396 MIC5397 MIC5398 MIC5399 | 7.0 PACKAGING INFORMATION | 7.1 Package Marking Information | ●, ▲, ▼Pin one index is identified by a dot, delta up, or delta down (triangle mark). | 3 e | 3 e | Underbar (_) symbol may not be
P13 · p13_fig01P13
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) — Datasheet Page 13 (p13_fig01)
Datasheet Page 13 (p13_fig01)
P14 · p14_fig011427×1883px
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) — Sheet 1 of 2 Microchip Technology Drawing C04-1153 Rev A
Sheet 1 of 2 Microchip Technology Drawing C04-1153 Rev A
P16 · p16_fig011129×972px
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) — RECOMMENDED LAND PATTERN
RECOMMENDED LAND PATTERN
P16 · p16_fig01P16
MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) — Datasheet Page 16 (p16_fig01)
Datasheet Page 16 (p16_fig01)
Page 1 / 2 (13 extracted figures)

Technical Specifications & Part Details (MIC5398-P4YMX-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) is a 8-pin standard electronic & interconnect component featuring a 1.20 × 1.60 × 0.85 mm mechanical envelope (lead pitch e = 0.40 mm). Rated for 2.5V to 5.5V supply operation across 40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
2.5V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
37 µA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
1.20 × 1.60 × 0.85 mm (A1=0.03 mm)
Package family: DFN (X2DFN-8(1.2x1.6))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.40 mm (15.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.40mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (X2DFN-8(1.2x1.6))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
1.20 × 1.60 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.40mm
Pad Size (W × L)Level B
0.20 × 0.34 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
X2DFN-8(1.2x1.6)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6))?

Manufactured by MICROCHIP, the MIC5398-P4YMX-TR is housed in a X2DFN-8(1.2x1.6) package with 9 pins and a 0.40 mm lead pitch, supporting a VCC supply range of 2.5V to 5.5V. Key pins include: 1 (GND: Ground Reference Pin (GND)), 2 (VOUT1: Power Supply Input (VOUT1 — 2.5V to 5.5V)), 3 (VOUT2: Power Supply Input (VOUT2 — 2.5V to 5.5V)), 4 (GND: Ground Reference Pin (GND)), 5 (EN2: Multiplexed I/O & Peripheral Pin EN2 (General)), 6 (VIN2: Power Supply Input (VIN2 — 2.5V to 5.5V)).

What are the IPC-7351B PCB Footprint dimensions for MIC5398-P4YMX-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC5398-P4YMX-TR (X2DFN-8(1.2x1.6)) has a nominal body envelope of 1.60 × 1.20 mm, pitch e = 0.40 mm, and 9 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC5398-P4YMX-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC5398-P4YMX-TR (MICROCHIP, X2DFN-8(1.2x1.6)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & MIC5398 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
2VOUT1Power_InPrimary positive power supply input (VOUT1) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).
3VOUT2Power_InPrimary positive power supply input (VOUT2) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).
4GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
5EN2Digital_IOSignal terminal EN2 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: EN2. Supported peripheral buses: General.
6VIN2Power_InPrimary positive power supply input (VIN2) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).
7VIN1Power_InPrimary positive power supply input (VIN1) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).
8EN1Digital_IOSignal terminal EN1 (I/O, 2.5V to 5.5V domain). Multiplexed alternate functions: EN1. Supported peripheral buses: General.
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.