MIC5305-2.5YML-TR (MLF-6) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC5305-2.5YML-TR

MICROCHIPMLF-6 · 7 Pins · Pitch 0.65mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC5305-2.5YML-TR (MLF-6)1EN2GND3VIN4VOUT7EP6BYP5NCGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
1234567E=2.00mm · Pitch e=0.65mmD=2.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 2.00mm × 2.00mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (7/7)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1ENISystem Enable & Hardware Reset (EN)
2GNDGNDGround Reference Pin (GND)
3VINPowerPower Supply Input (VIN — 2.25 to 5.5V)
4VOUTPowerRegulated Power Output (VOUT — 2.25 to 5.5V)
5NCI/OMultiplexed I/O & Peripheral Pin NC (General)
6BYPI/OMultiplexed I/O & Peripheral Pin BYP (General)
7EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 EN
I
System Enable & Hardware Reset (EN)
Design note: Chip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 14 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC5305-2.5YML-TR (MLF-6) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC5305-2.5YML-TR (MLF-6) - 2. Standard Pinout (Top View)
True package pinout (7 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC5305-2.5YML-TR (MLF-6) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC5305-2.5YML-TR (MLF-6) - 4. Package Dimensions (D×E×A)
MLF-6 · 2.00×2.00mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC5305-2.5YML-TR (MLF-6) - 5. Recommended Land Pattern
IPC-7351B Footprint (7 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC5305-2.5YML-TR (MLF-6) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (14 figures · Page 1/2)
Showing 1–12 of 14 uncropped original figures for MIC5305
P3 · p03_fig01EXACT PACKAGE
MIC5305-2.5YML-TR (MLF-6) — Pin Configuration
Pin Configuration
P3 · p03_fig02EXACT PACKAGE
MIC5305-2.5YML-TR (MLF-6) — MIC5305-x.xBML/YML (Adjustable) 6-Pin 2mm x 2mm MLF® (ML) (Top View)
MIC5305-x.xBML/YML (Adjustable) 6-Pin 2mm x 2mm MLF® (ML) (Top View)
P3 · p03_fig03EXACT PACKAGE
MIC5305-2.5YML-TR (MLF-6) — MIC5305-x.xBML/YML (Fixed) 6-Pin 2mm x 2mm MLF® (ML) (Top View)
MIC5305-x.xBML/YML (Fixed) 6-Pin 2mm x 2mm MLF® (ML) (Top View)
P11 · p11_fig01EXACT PACKAGE
MIC5305-2.5YML-TR (MLF-6) — June 2007 11 M9999-062507
June 2007 11 M9999-062507
P1 · p01_fig01426×826px
MIC5305-2.5YML-TR (MLF-6) — MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc.
MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc.
P1 · p01_fig02261×263px
MIC5305-2.5YML-TR (MLF-6) — 0 20 40 60 80 100 120 140
0 20 40 60 80 100 120 140
P1 · p01_fig031162×413px
MIC5305-2.5YML-TR (MLF-6) — MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc.
MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc.
P1 · p01_fig03P1
MIC5305-2.5YML-TR (MLF-6) — Datasheet Page 1 (p01_fig03)
Datasheet Page 1 (p01_fig03)
P3 · p03_fig01P3
MIC5305-2.5YML-TR (MLF-6) — Datasheet Page 3 (p03_fig01)
Datasheet Page 3 (p03_fig01)
P3 · p03_fig03P3
MIC5305-2.5YML-TR (MLF-6) — Datasheet Page 3 (p03_fig03)
Datasheet Page 3 (p03_fig03)
P7 · p07_fig01644×430px
MIC5305-2.5YML-TR (MLF-6) — TIME (400µs/div)
TIME (400µs/div)
P7 · p07_fig02650×441px
MIC5305-2.5YML-TR (MLF-6) — TIME (4µs/div)
TIME (4µs/div)
Page 1 / 2 (14 extracted figures)

Technical Specifications & Part Details (MIC5305-2.5YML-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC5305-2.5YML-TR (MLF-6) is a 6-pin standard electronic & interconnect component featuring a 2.00 × 2.00 × 0.75 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 2.25 to 5.5V supply operation across 40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
2.25 to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
90µA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.00 × 2.00 × 0.75 mm (A1=0.02 mm)
Package family: OTHER (MLF-6)
Pin Count & Lead PitchN / e
6 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol7 auto-grouped pins
OK
IPC-7351B Land Pattern7 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — MIC5305 (2)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (MLF-6)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.75mm · e=0.65mm
Pad Size (W × L)Level B
0.30 × 0.60 mm
Pins / Total PadsTopology
7P / 7Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
MLF-6
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC5305-2.5YML-TR (MLF-6)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC5305-2.5YML-TR (MLF-6)?

Manufactured by MICROCHIP, the MIC5305-2.5YML-TR is housed in a MLF-6 package with 7 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 2.25 to 5.5V. Key pins include: 1 (EN: System Enable & Hardware Reset (EN)), 2 (GND: Ground Reference Pin (GND)), 3 (VIN: Power Supply Input (VIN — 2.25 to 5.5V)), 4 (VOUT: Regulated Power Output (VOUT — 2.25 to 5.5V)), 5 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 6 (BYP: Multiplexed I/O & Peripheral Pin BYP (General)).

What are the IPC-7351B PCB Footprint dimensions for MIC5305-2.5YML-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC5305-2.5YML-TR (MLF-6) has a nominal body envelope of 2.00 × 2.00 mm, pitch e = 0.65 mm, and 7 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC5305-2.5YML-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC5305-2.5YML-TR (MICROCHIP, MLF-6) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (7 pins) & MIC5305 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1ENDigital_IOChip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
2GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
3VINPower_InPrimary positive power supply input (VIN) operating in the 2.25 to 5.5V domain (Max rating: 5.5V).
4VOUTPower_OutRegulated power output rail (VOUT) operating in the 2.25 to 5.5V domain (Max rating: 5.5V).
5NCNCSignal terminal NC (I/O, 2.25 to 5.5V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
6BYPDigital_IOSignal terminal BYP (I/O, 2.25 to 5.5V domain). Multiplexed alternate functions: BYP. Supported peripheral buses: General.
7EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.