MIC44F20YML-TR (DFN-8-EP(2x2)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC44F20YML-TR

MICROCHIPDFN-8-EP(2x2) · 9 Pins · Pitch 0.50mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC44F20YML-TR (DFN-8-EP(2x2))1OUT2VDD3NC4IN5EN/UVLO9EP8OUT7GND6GNDGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
123456789E=2.00mm · Pitch e=0.50mmD=2.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 2.00mm × 2.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1OUTI/OMultiplexed I/O & Peripheral Pin OUT (General)
2VDDPowerPower Supply Input (VDD — 4.5V to 12.6V)
3NCI/OMultiplexed I/O & Peripheral Pin NC (General)
4INI/OMultiplexed I/O & Peripheral Pin IN (General)
5EN/UVLOI/OMultiplexed I/O & Peripheral Pin EN/UVLO (General)
6GNDGNDGround Reference Pin (GND)
7GNDGNDGround Reference Pin (GND)
8OUTI/OMultiplexed I/O & Peripheral Pin OUT (General)
9EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 OUT
I/O
Multiplexed I/O & Peripheral Pin OUT (General)
Design note: Driver Output.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 13 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC44F20YML-TR (DFN-8-EP(2x2)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC44F20YML-TR (DFN-8-EP(2x2)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC44F20YML-TR (DFN-8-EP(2x2)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC44F20YML-TR (DFN-8-EP(2x2)) - 4. Package Dimensions (D×E×A)
DFN-8-EP(2x2) · 2.00×2.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC44F20YML-TR (DFN-8-EP(2x2)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC44F20YML-TR (DFN-8-EP(2x2)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (13 figures · Page 1/2)
Showing 1–12 of 13 uncropped original figures for MIC44F20YML
P1 · p01_fig01377×200px
MIC44F20YML-TR (DFN-8-EP(2x2)) — 6A, 12.6V High Speed MOSFET Drivers with Enable Input
6A, 12.6V High Speed MOSFET Drivers with Enable Input
P1 · p01_fig02831×697px
MIC44F20YML-TR (DFN-8-EP(2x2)) — Package Types | Please see pin descriptions in Table 3-1. | IN EN/UVLO 5 4 | OUT | VDD | NC | OUT | GND | GND | 8 | 7 | 6 | 1 | 2 | 3 | EP | 8-Pin ePAD MSOP (MME)
Package Types | Please see pin descriptions in Table 3-1. | IN EN/UVLO 5 4 | OUT | VDD | NC | OUT | GND | GND | 8 | 7 | 6 | 1 | 2 | 3 | EP | 8-Pin ePAD MSOP (MME)
P1 · p01_fig03700×528px
MIC44F20YML-TR (DFN-8-EP(2x2)) — IN EN/UVLO 4 | OUT | VDD | NC | OUT | GND | GND | 8 | 7 | 6 | 1 | 2 | 3 | 5 EP | 8-Pin 2 mm x 2 mm DFN (ML)
IN EN/UVLO 4 | OUT | VDD | NC | OUT | GND | GND | 8 | 7 | 6 | 1 | 2 | 3 | 5 EP | 8-Pin 2 mm x 2 mm DFN (ML)
P2 · p02_fig011777×685px
MIC44F20YML-TR (DFN-8-EP(2x2)) — Typical Application Circuits
Typical Application Circuits
P2 · p02_fig021777×875px
MIC44F20YML-TR (DFN-8-EP(2x2)) — Functional Block Diagram
Functional Block Diagram
P2 · p02_fig01P2
MIC44F20YML-TR (DFN-8-EP(2x2)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P14 · p14_fig011777×1569px
MIC44F20YML-TR (DFN-8-EP(2x2)) — FIGURE 5-2: Gate Charge.
FIGURE 5-2: Gate Charge.
P14 · p14_fig02578×590px
MIC44F20YML-TR (DFN-8-EP(2x2)) — FIGURE 5-2: Gate Charge.
FIGURE 5-2: Gate Charge.
P18 · p18_fig011568×2185px
MIC44F20YML-TR (DFN-8-EP(2x2)) — MIC44F18/19/20 | 6.0 PACKAGING INFORMATION | 6.1 Package Marking Information | Example 8-Pin ePAD MSOP* | Example 8-Pin DFN* | NNN XXXXX | 938 44F20 | NNN XXX | 408 D12 | ●, ▲, ▼Pin one index is identified by a dot, delta up, or delta down
MIC44F18/19/20 | 6.0 PACKAGING INFORMATION | 6.1 Package Marking Information | Example 8-Pin ePAD MSOP* | Example 8-Pin DFN* | NNN XXXXX | 938 44F20 | NNN XXX | 408 D12 | ●, ▲, ▼Pin one index is identified by a dot, delta up, or delta down
P18 · p18_fig01P18
MIC44F20YML-TR (DFN-8-EP(2x2)) — Datasheet Page 18 (p18_fig01)
Datasheet Page 18 (p18_fig01)
P19 · p19_fig011659×1751px
MIC44F20YML-TR (DFN-8-EP(2x2)) — 8-Lead MSOP ePAD Package Outline and Recommended Land Pattern
8-Lead MSOP ePAD Package Outline and Recommended Land Pattern
P19 · p19_fig01P19
MIC44F20YML-TR (DFN-8-EP(2x2)) — Datasheet Page 19 (p19_fig01)
Datasheet Page 19 (p19_fig01)
Page 1 / 2 (13 extracted figures)

Technical Specifications & Part Details (MIC44F20YML-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC44F20YML-TR (DFN-8-EP(2x2)) is a 8-pin standard electronic & interconnect component featuring a 2.00 × 2.00 × 0.85 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 4.5V to 12.6V supply operation across 40°C to +125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
4.5V to 12.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
DC / Broadband Passive
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.00 × 2.00 × 0.85 mm (A1=0.03 mm)
Package family: DFN (DFN-8-EP(2x2))
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (DFN-8-EP(2x2))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.50mm
Pad Size (W × L)Level B
0.25 × 0.60 mm
Pins / Total PadsTopology
9P / 9Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
DFN-8-EP(2x2)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC44F20YML-TR (DFN-8-EP(2x2))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC44F20YML-TR (DFN-8-EP(2x2))?

Manufactured by MICROCHIP, the MIC44F20YML-TR is housed in a DFN-8-EP(2x2) package with 9 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 4.5V to 12.6V. Key pins include: 1 (OUT: Multiplexed I/O & Peripheral Pin OUT (General)), 2 (VDD: Power Supply Input (VDD — 4.5V to 12.6V)), 3 (NC: Multiplexed I/O & Peripheral Pin NC (General)), 4 (IN: Multiplexed I/O & Peripheral Pin IN (General)), 5 (EN/UVLO: Multiplexed I/O & Peripheral Pin EN/UVLO (General)), 6 (GND: Ground Reference Pin (GND)).

What are the IPC-7351B PCB Footprint dimensions for MIC44F20YML-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC44F20YML-TR (DFN-8-EP(2x2)) has a nominal body envelope of 2.00 × 2.00 mm, pitch e = 0.50 mm, and 9 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC44F20YML-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC44F20YML-TR (MICROCHIP, DFN-8-EP(2x2)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & MIC44F20YML Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1OUTDigital_IOSignal terminal OUT (I/O, 4.5V to 12.6V domain). Multiplexed alternate functions: OUT. Supported peripheral buses: General.
2VDDPower_InPrimary positive power supply input (VDD) operating in the 4.5V to 12.6V domain (Max rating: 12.6V).
3NCNCSignal terminal NC (I/O, 4.5V to 12.6V domain). Multiplexed alternate functions: NC. Supported peripheral buses: General.
4INDigital_IOSignal terminal IN (I/O, 4.5V to 12.6V domain). Multiplexed alternate functions: IN. Supported peripheral buses: General.
5EN/UVLODigital_IOSignal terminal EN/UVLO (I/O, 4.5V to 12.6V domain). Multiplexed alternate functions: EN/UVLO. Supported peripheral buses: General.
6GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
7GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
8OUTDigital_IOSignal terminal OUT (I/O, 4.5V to 12.6V domain). Multiplexed alternate functions: OUT. Supported peripheral buses: General.
9EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.