MIC2225-4SYMT-TR (TMLF-10) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC2225-4SYMT-TR

MICROCHIPTMLF-10 · 10 Pins · Pitch 0.40mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC2225-4SYMT-TR (TMLF-10)1AGND2LDO3BIAS4AVIN5FB10PGND9SW8VIN7ENLDO6ENGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
11029384756E=2.00mm · Pitch e=0.40mmD=2.00mm-3-2-101233210-1-2-3mm
3. 3D CAD MODEL
Package Body: 2.00mm × 2.00mm · Pitch: 0.40mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (10/10)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1AGNDGNDGround Reference Pin (AGND)
2LDOI/OMultiplexed I/O & Peripheral Pin LDO (General)
3BIASI/OMultiplexed I/O & Peripheral Pin BIAS (General)
4AVINPowerPower Supply Input (AVIN — 2.7V to 5.5V)
5FBI/OMultiplexed I/O & Peripheral Pin FB (General)
6ENISystem Enable & Hardware Reset (EN)
7ENLDOI/OMultiplexed I/O & Peripheral Pin ENLDO (General)
8VINPowerPower Supply Input (VIN — 2.7V to 5.5V)
9SWI/OMultiplexed I/O & Peripheral Pin SW (General)
10PGNDGNDGround Reference Pin (PGND)
PIN 1 AGND
GND
Ground Reference Pin (AGND)
Design note: Analog (signal) Ground.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 8 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC2225-4SYMT-TR (TMLF-10) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC2225-4SYMT-TR (TMLF-10) - 2. Standard Pinout (Top View)
True package pinout (10 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC2225-4SYMT-TR (TMLF-10) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC2225-4SYMT-TR (TMLF-10) - 4. Package Dimensions (D×E×A)
TMLF-10 · 2.00×2.00mm · Pitch 0.40mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC2225-4SYMT-TR (TMLF-10) - 5. Recommended Land Pattern
IPC-7351B Footprint (10 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC2225-4SYMT-TR (TMLF-10) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (8 figures · Page 1/1)
Showing 1–8 of 8 uncropped original figures for MIC2225
P2 · p02_fig01EXACT PACKAGE
MIC2225-4SYMT-TR (TMLF-10) — * Refers to nominal output voltage of DC/DC and LDO respectively. Pin Configuration | FB EN 5 | 1 AGND | LDO | BIAS | AVIN | 10 PGND | SW | VIN | ENLDO | 9 | 8 | 7 | 2 | 3 | 4 | 6 | 10-Pin 2mm x 2mm Thin MLF® (MT)
* Refers to nominal output voltage of DC/DC and LDO respectively. Pin Configuration | FB EN 5 | 1 AGND | LDO | BIAS | AVIN | 10 PGND | SW | VIN | ENLDO | 9 | 8 | 7 | 2 | 3 | 4 | 6 | 10-Pin 2mm x 2mm Thin MLF® (MT)
P15 · p15_fig01EXACT PACKAGE
MIC2225-4SYMT-TR (TMLF-10) — Micrel, Inc. MIC2225 | Package Information | 10-Pin Thin MLF® (MT)
Micrel, Inc. MIC2225 | Package Information | 10-Pin Thin MLF® (MT)
P1 · p01_fig011843×546px
MIC2225-4SYMT-TR (TMLF-10) — MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc.
MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc.
P1 · p01_fig01P1
MIC2225-4SYMT-TR (TMLF-10) — Datasheet Page 1 (p01_fig01)
Datasheet Page 1 (p01_fig01)
P2 · p02_fig01P2
MIC2225-4SYMT-TR (TMLF-10) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P13 · p13_fig01894×852px
MIC2225-4SYMT-TR (TMLF-10) — PCB Layout Recommendations
PCB Layout Recommendations
P13 · p13_fig021479×1050px
MIC2225-4SYMT-TR (TMLF-10) — February 2008 13 M9999-022008-D
February 2008 13 M9999-022008-D
P13 · p13_fig01P13
MIC2225-4SYMT-TR (TMLF-10) — Datasheet Page 13 (p13_fig01)
Datasheet Page 13 (p13_fig01)

Technical Specifications & Part Details (MIC2225-4SYMT-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC2225-4SYMT-TR (TMLF-10) is a 10-pin standard electronic & interconnect component featuring a 2.00 × 2.00 × 0.75 mm mechanical envelope (lead pitch e = 0.40 mm). Rated for 2.7V to 5.5V supply operation across 40°C to +125°C with integrated USB, PWM interfaces.
Operating Supply VoltageV_CC / V_DD
2.7V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
2MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
600mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
2.00 × 2.00 × 0.75 mm (A1=0.02 mm)
Package family: OTHER (TMLF-10)
Pin Count & Lead PitchN / e
10 Pins | Pitch e = 0.40 mm (15.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB, PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol10 auto-grouped pins
OK
IPC-7351B Land Pattern10 pads · Pitch 0.40mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TMLF-10)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
2.00 × 2.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.75mm · e=0.40mm
Pad Size (W × L)Level B
0.20 × 0.91 mm
Pins / Total PadsTopology
10P / 10Pad (CUSTOM_ARRAY)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TMLF-10
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC2225-4SYMT-TR (TMLF-10)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC2225-4SYMT-TR (TMLF-10)?

Manufactured by MICROCHIP, the MIC2225-4SYMT-TR is housed in a TMLF-10 package with 10 pins and a 0.40 mm lead pitch, supporting a VCC supply range of 2.7V to 5.5V. Key pins include: 1 (AGND: Ground Reference Pin (AGND)), 2 (LDO: Multiplexed I/O & Peripheral Pin LDO (General)), 3 (BIAS: Multiplexed I/O & Peripheral Pin BIAS (General)), 4 (AVIN: Power Supply Input (AVIN — 2.7V to 5.5V)), 5 (FB: Multiplexed I/O & Peripheral Pin FB (General)), 6 (EN: System Enable & Hardware Reset (EN)).

What are the IPC-7351B PCB Footprint dimensions for MIC2225-4SYMT-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC2225-4SYMT-TR (TMLF-10) has a nominal body envelope of 2.00 × 2.00 mm, pitch e = 0.40 mm, and 10 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC2225-4SYMT-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC2225-4SYMT-TR (MICROCHIP, TMLF-10) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (10 pins) & MIC2225 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1AGNDGND0V electrical ground return terminal (AGND) for internal core logic, I/O drivers, and analog sub-blocks.
2LDODigital_IOSignal terminal LDO (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: LDO. Supported peripheral buses: General.
3BIASDigital_IOSignal terminal BIAS (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: BIAS. Supported peripheral buses: General.
4AVINPower_InPrimary positive power supply input (AVIN) operating in the 2.7V to 5.5V domain (Max rating: 5.5V).
5FBDigital_IOSignal terminal FB (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: FB. Supported peripheral buses: General.
6ENDigital_IOChip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
7ENLDODigital_IOSignal terminal ENLDO (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: ENLDO. Supported peripheral buses: General.
8VINPower_InPrimary positive power supply input (VIN) operating in the 2.7V to 5.5V domain (Max rating: 5.5V).
9SWDigital_IOSignal terminal SW (I/O, 2.7V to 5.5V domain). Multiplexed alternate functions: SW. Supported peripheral buses: General.
10PGNDGND0V electrical ground return terminal (PGND) for internal core logic, I/O drivers, and analog sub-blocks.