LAN8740AI-EN-TR (QFN-32-EP(5x5)) — Symbol, Footprint IPC-7351B & 3D STEP Model

LAN8740AI-EN-TR

MICROCHIPQFN-32-EP(5x5) · 33 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · LAN8740AI-EN-TR (QFN-32-EP(5x5))1LED 22LED2/nINT/nP3LED1/nINT/nP4XTAL25XTAL1/CLKIN6VDDCR7RXCLK/PHYAD18RXD3/PHYAD29RXD2/nPME/RM10RXD1/MODE111RXD0/MODE012VDDIO13RXER/RXD4/PH14CRS15COL/CRS DV/M16MDIO17MDC33GND32RBIAS31RXP30RXN29TXP28TXN27VDD1A26RXDV25TXD324TXD223TXD122TXD021TXEN20TXCLK19nRST18nINT/TXER/TXGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.827.922.917.812.77.62.5-2.5-7.6-12.7-17.8-22.9-27.9mm
2. 2D FOOTPRINT
123456789101112131415161718192021222324252627282930313233E=5.00mm · Pitch e=0.50mmD=5.00mm-5-4-3-2-1012345543210-1-2-3-4-5mm
3. 3D CAD MODEL
Package Body: 5.00mm × 5.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (33/33)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1LED 2I/OMultiplexed I/O & Peripheral Pin LED 2 (CAN)
2LED2/nINT/nPME/nINTSELI/OMultiplexed I/O & Peripheral Pin LED2/nINT/nPME/nINTSEL (General)
3LED1/nINT/nPME/REGOFFI/OMultiplexed I/O & Peripheral Pin LED1/nINT/nPME/REGOFF (General)
4XTAL2I/OMultiplexed I/O & Peripheral Pin XTAL2 (RTC/CLK)
5XTAL1/CLKINI/OMultiplexed I/O & Peripheral Pin XTAL1/CLKIN (RTC/CLK)
6VDDCRPowerPower Supply Input (VDDCR — 3.3V / 5.0V Standard Logic)
7RXCLK/PHYAD1I/OMultiplexed I/O & Peripheral Pin RXCLK/PHYAD1 (General)
8RXD3/PHYAD2I/OMultiplexed I/O & Peripheral Pin RXD3/PHYAD2 (UART)
9RXD2/nPME/RMIISELI/OMultiplexed I/O & Peripheral Pin RXD2/nPME/RMIISEL (UART)
10RXD1/MODE1I/OMultiplexed I/O & Peripheral Pin RXD1/MODE1 (UART)
11RXD0/MODE0I/OMultiplexed I/O & Peripheral Pin RXD0/MODE0 (UART)
12VDDIOPowerPower Supply Input (VDDIO — 3.3V / 5.0V Standard Logic)
13RXER/RXD4/PHYAD0I/OMultiplexed I/O & Peripheral Pin RXER/RXD4/PHYAD0 (UART)
14CRSI/OMultiplexed I/O & Peripheral Pin CRS (General)
15COL/CRS DV/MODE2_I/OMultiplexed I/O & Peripheral Pin COL/CRS DV/MODE2_ (General)
16MDIOI/OMultiplexed I/O & Peripheral Pin MDIO (General)
17MDCI/OMultiplexed I/O & Peripheral Pin MDC (General)
18nINT/TXER/TXD4I/OMultiplexed I/O & Peripheral Pin nINT/TXER/TXD4 (UART)
19nRSTISystem Enable & Hardware Reset (nRST)
20TXCLKI/OMultiplexed I/O & Peripheral Pin TXCLK (General)
21TXENI/OMultiplexed I/O & Peripheral Pin TXEN (General)
22TXD0I/OMultiplexed I/O & Peripheral Pin TXD0 (UART)
23TXD1I/OMultiplexed I/O & Peripheral Pin TXD1 (UART)
24TXD2I/OMultiplexed I/O & Peripheral Pin TXD2 (UART)
25TXD3I/OMultiplexed I/O & Peripheral Pin TXD3 (UART)
26RXDVI/OMultiplexed I/O & Peripheral Pin RXDV (UART)
27VDD1APowerPower Supply Input (VDD1A — 3.3V / 5.0V Standard Logic)
28TXNI/OMultiplexed I/O & Peripheral Pin TXN (General)
29TXPI/OMultiplexed I/O & Peripheral Pin TXP (General)
30RXNI/OMultiplexed I/O & Peripheral Pin RXN (General)
31RXPI/OMultiplexed I/O & Peripheral Pin RXP (General)
32RBIASI/OMultiplexed I/O & Peripheral Pin RBIAS (General)
33GNDGNDGround Reference Pin (GND)
PIN 1 LED 2
I/O
Multiplexed I/O & Peripheral Pin LED 2 (CAN)
Design note: This pin can be used to indicate link activity, link speed, nINT, or nPME as configured via the LED2 Function Select field of the Wakeup Control and Status Register (WUCSR). Note: Refer to Section 3.8.1, "LEDs" and Sec- tion 3.8.4, "Wake on
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 12 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
LAN8740AI-EN-TR (QFN-32-EP(5x5)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
LAN8740AI-EN-TR (QFN-32-EP(5x5)) - 2. Standard Pinout (Top View)
True package pinout (33 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
LAN8740AI-EN-TR (QFN-32-EP(5x5)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
LAN8740AI-EN-TR (QFN-32-EP(5x5)) - 4. Package Dimensions (D×E×A)
QFN-32-EP(5x5) · 5.00×5.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
LAN8740AI-EN-TR (QFN-32-EP(5x5)) - 5. Recommended Land Pattern
IPC-7351B Footprint (33 Pads)Expand ›
6. Application SchematicSCHEMATIC
LAN8740AI-EN-TR (QFN-32-EP(5x5)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (12 figures · Page 1/1)
Showing 1–12 of 12 uncropped original figures for LAN8740
P1 · p01_fig01376×200px
LAN8740AI-EN-TR (QFN-32-EP(5x5)) — Small Footprint MII/RMII 10/100 Energy Efficient Ethernet Transceiver with HP Auto-MDIX and flexPWR® Technology
Small Footprint MII/RMII 10/100 Energy Efficient Ethernet Transceiver with HP Auto-MDIX and flexPWR® Technology
P6 · p06_fig011782×1625px
LAN8740AI-EN-TR (QFN-32-EP(5x5)) — FIGURE 2-1: 32-VQFN PIN ASSIGNMENTS (TOP VIEW)
FIGURE 2-1: 32-VQFN PIN ASSIGNMENTS (TOP VIEW)
P6 · p06_fig01P6
LAN8740AI-EN-TR (QFN-32-EP(5x5)) — Datasheet Page 6 (p06_fig01)
Datasheet Page 6 (p06_fig01)
P17 · p17_fig011558×848px
LAN8740AI-EN-TR (QFN-32-EP(5x5)) — FIGURE 3-1: 100BASE-TX TRANSMIT DATA PATH
FIGURE 3-1: 100BASE-TX TRANSMIT DATA PATH
P19 · p19_fig011782×1004px
LAN8740AI-EN-TR (QFN-32-EP(5x5)) — FIGURE 3-2: 100BASE-TX RECEIVE DATA PATH
FIGURE 3-2: 100BASE-TX RECEIVE DATA PATH
P19 · p19_fig01P19
LAN8740AI-EN-TR (QFN-32-EP(5x5)) — Datasheet Page 19 (p19_fig01)
Datasheet Page 19 (p19_fig01)
P56 · p56_fig011782×1105px
LAN8740AI-EN-TR (QFN-32-EP(5x5)) — FIGURE 3-20: TWISTED-PAIR INTERFACE DIAGRAM (SINGLE POWER SUPPLY)
FIGURE 3-20: TWISTED-PAIR INTERFACE DIAGRAM (SINGLE POWER SUPPLY)
P127 · p127_fig011782×2429px
LAN8740AI-EN-TR (QFN-32-EP(5x5)) — 6.0 PACKAGE OUTLINE
6.0 PACKAGE OUTLINE
P127 · p127_fig01P127
LAN8740AI-EN-TR (QFN-32-EP(5x5)) — Datasheet Page 127 (p127_fig01)
Datasheet Page 127 (p127_fig01)
P128 · p128_fig011782×2392px
LAN8740AI-EN-TR (QFN-32-EP(5x5)) — LAN8740A/LAN8740Ai | Microchip Technology Drawing C04-160B SQFN Sheet 2 of 2 | For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging Note: | Number of Terminals
LAN8740A/LAN8740Ai | Microchip Technology Drawing C04-160B SQFN Sheet 2 of 2 | For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging Note: | Number of Terminals
P129 · p129_fig011782×2398px
LAN8740AI-EN-TR (QFN-32-EP(5x5)) —  2013-2015 Microchip Technology Inc. DS00001987A-page 129
 2013-2015 Microchip Technology Inc. DS00001987A-page 129
P129 · p129_fig01P129
LAN8740AI-EN-TR (QFN-32-EP(5x5)) — Datasheet Page 129 (p129_fig01)
Datasheet Page 129 (p129_fig01)

Technical Specifications & Part Details (LAN8740AI-EN-TR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:LAN8740AI-EN-TR (QFN-32-EP(5x5)) is a 32-pin standard electronic & interconnect component featuring a 5.00 × 5.00 × 0.90 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across 0°C to +70°C with integrated CAN, RTC/CLK, UART interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
0°C to +70°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
25 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
5.00 × 5.00 × 0.90 mm (A1=0.03 mm)
Package family: QFN (QFN-32-EP(5x5))
Pin Count & Lead PitchN / e
32 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
CAN, RTC/CLK, UART
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol33 auto-grouped pins
OK
IPC-7351B Land Pattern33 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 3.30×3.30mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (QFN-32-EP(5x5))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
5.00 × 5.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 0.85 mm
Pins / Total PadsTopology
33P / 33Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-32-EP(5x5)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — LAN8740AI-EN-TR (QFN-32-EP(5x5))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of LAN8740AI-EN-TR (QFN-32-EP(5x5))?

Manufactured by MICROCHIP, the LAN8740AI-EN-TR is housed in a QFN-32-EP(5x5) package with 33 pins and a 0.50 mm lead pitch. Key pins include: 1 (LED 2: Multiplexed I/O & Peripheral Pin LED 2 (CAN)), 2 (LED2/nINT/nPME/nINTSEL: Multiplexed I/O & Peripheral Pin LED2/nINT/nPME/nINTSEL (General)), 3 (LED1/nINT/nPME/REGOFF: Multiplexed I/O & Peripheral Pin LED1/nINT/nPME/REGOFF (General)), 4 (XTAL2: Multiplexed I/O & Peripheral Pin XTAL2 (RTC/CLK)), 5 (XTAL1/CLKIN: Multiplexed I/O & Peripheral Pin XTAL1/CLKIN (RTC/CLK)), 6 (VDDCR: Power Supply Input (VDDCR — 3.3V / 5.0V Standard Logic)).

What are the IPC-7351B PCB Footprint dimensions for LAN8740AI-EN-TR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), LAN8740AI-EN-TR (QFN-32-EP(5x5)) has a nominal body envelope of 5.00 × 5.00 mm, pitch e = 0.50 mm, and 33 copper pads plus a central exposed thermal pad (EPAD) of 3.30 × 3.30 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for LAN8740AI-EN-TR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for LAN8740AI-EN-TR (MICROCHIP, QFN-32-EP(5x5)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (33 pins) & LAN8740 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1LED 2Digital_IOSignal terminal LED 2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: LED 2. Supported peripheral buses: CAN.
2LED2/nINT/nPME/nINTSELDigital_IOSignal terminal LED2/nINT/nPME/nINTSEL (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: LED2/nINT/nPME/nINTSEL. Supported peripheral buses: General.
3LED1/nINT/nPME/REGOFFDigital_IOSignal terminal LED1/nINT/nPME/REGOFF (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: LED1/nINT/nPME/REGOFF. Supported peripheral buses: General.
4XTAL2Digital_IOSignal terminal XTAL2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: XTAL2. Supported peripheral buses: RTC/CLK.
5XTAL1/CLKINDigital_IOSignal terminal XTAL1/CLKIN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: XTAL1/CLKIN. Supported peripheral buses: RTC/CLK.
6VDDCRPower_InPrimary positive power supply input (VDDCR) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
7RXCLK/PHYAD1Digital_IOSignal terminal RXCLK/PHYAD1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RXCLK/PHYAD1. Supported peripheral buses: General.
8RXD3/PHYAD2Digital_IOSignal terminal RXD3/PHYAD2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RXD3/PHYAD2. Supported peripheral buses: UART.
9RXD2/nPME/RMIISELDigital_IOSignal terminal RXD2/nPME/RMIISEL (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RXD2/nPME/RMIISEL. Supported peripheral buses: UART.
10RXD1/MODE1Digital_IOSignal terminal RXD1/MODE1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RXD1/MODE1. Supported peripheral buses: UART.
11RXD0/MODE0Digital_IOSignal terminal RXD0/MODE0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RXD0/MODE0. Supported peripheral buses: UART.
12VDDIOPower_InPrimary positive power supply input (VDDIO) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
13RXER/RXD4/PHYAD0Digital_IOSignal terminal RXER/RXD4/PHYAD0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RXER/RXD4/PHYAD0. Supported peripheral buses: UART.
14CRSDigital_IOSignal terminal CRS (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CRS. Supported peripheral buses: General.
15COL/CRS DV/MODE2_Digital_IOSignal terminal COL/CRS DV/MODE2_ (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: COL/CRS DV/MODE2_. Supported peripheral buses: General.
16MDIODigital_IOSignal terminal MDIO (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: MDIO. Supported peripheral buses: General.
17MDCDigital_IOSignal terminal MDC (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: MDC. Supported peripheral buses: General.
18nINT/TXER/TXD4Digital_IOSignal terminal nINT/TXER/TXD4 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: nINT/TXER/TXD4. Supported peripheral buses: UART.
19nRSTDigital_IOActive-low hardware reset terminal (nRST): pulling this pin Low resets the processor core and peripherals.
20TXCLKDigital_IOSignal terminal TXCLK (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TXCLK. Supported peripheral buses: General.
21TXENDigital_IOSignal terminal TXEN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TXEN. Supported peripheral buses: General.
22TXD0Digital_IOSignal terminal TXD0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TXD0. Supported peripheral buses: UART.
23TXD1Digital_IOSignal terminal TXD1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TXD1. Supported peripheral buses: UART.
24TXD2Digital_IOSignal terminal TXD2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TXD2. Supported peripheral buses: UART.
25TXD3Digital_IOSignal terminal TXD3 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TXD3. Supported peripheral buses: UART.
26RXDVDigital_IOSignal terminal RXDV (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RXDV. Supported peripheral buses: UART.
27VDD1APower_InPrimary positive power supply input (VDD1A) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
28TXNDigital_IOSignal terminal TXN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TXN. Supported peripheral buses: General.
29TXPDigital_IOSignal terminal TXP (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TXP. Supported peripheral buses: General.
30RXNDigital_IOSignal terminal RXN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RXN. Supported peripheral buses: General.
31RXPDigital_IOSignal terminal RXP (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RXP. Supported peripheral buses: General.
32RBIASDigital_IOSignal terminal RBIAS (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: RBIAS. Supported peripheral buses: General.
33GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.