MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) — Symbol, Footprint IPC-7351B & 3D STEP Model

MIC5376-2.8YMT-TZ

MICROCHIPUDFN-4-EP(1x1) · 5 Pins · Pitch 0.46mmDISCREPANCY REVIEW REQUIRED5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1))1VOUT2GND3EN5EP4VINGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
13425E=1.00mm · Pitch e=0.46mmD=1.00mm-2-1012210-1-2mm
3. 3D CAD MODEL
Package Body: 1.00mm × 1.00mm · Pitch: 0.46mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (5/5)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1VOUTPowerRegulated Power Output (VOUT — 2.5V to 5.5V)
2GNDGNDGround Reference Pin (GND)
3ENISystem Enable & Hardware Reset (EN)
4VINPowerPower Supply Input (VIN — 2.5V to 5.5V)
5EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 VOUT
Power
Regulated Power Output (VOUT — 2.5V to 5.5V)
Design note: Output Voltage.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 15 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) - 2. Standard Pinout (Top View)
True package pinout (5 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) - 4. Package Dimensions (D×E×A)
UDFN-4-EP(1x1) · 1.00×1.00mm · Pitch 0.46mmExpand ›
5. Recommended Land PatternLAND PATTERN
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) - 5. Recommended Land Pattern
IPC-7351B Footprint (5 Pads)Expand ›
6. Application SchematicSCHEMATIC
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (15 figures · Page 1/2)
Showing 1–12 of 15 uncropped original figures for MIC5376
P1 · p01_fig01377×200px
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) — High Performance Low Dropout 150 mA LDO
High Performance Low Dropout 150 mA LDO
P1 · p01_fig021201×480px
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) — Typical Application Circuit
Typical Application Circuit
P1 · p01_fig02P1
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) — Datasheet Page 1 (p01_fig02)
Datasheet Page 1 (p01_fig02)
P2 · p02_fig041777×1295px
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) — Functional Block Diagram
Functional Block Diagram
P10 · p10_fig01868×440px
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) — FIGURE 4-1: Adjustable Regulator with Resistors. 4.6 Thermal Considerations
FIGURE 4-1: Adjustable Regulator with Resistors. 4.6 Thermal Considerations
P12 · p12_fig021359×816px
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) — MIC5378YMT Adjustable 67A
MIC5378YMT Adjustable 67A
P12 · p12_fig02P12
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) — Datasheet Page 12 (p12_fig02)
Datasheet Page 12 (p12_fig02)
P14 · p14_fig011662×1757px
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) — 4-Lead 1 mm x 1 mm TDFN Package Outline and Recommended Land Pattern
4-Lead 1 mm x 1 mm TDFN Package Outline and Recommended Land Pattern
P14 · p14_fig01P14
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) — Datasheet Page 14 (p14_fig01)
Datasheet Page 14 (p14_fig01)
P2 · p02_fig01All Packages in PDF
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) — MIC5377/8 MIC5377 MIC5378 (Adjustable Output) 5-Lead SC-70 (C5) (Top View)
MIC5377/8 MIC5377 MIC5378 (Adjustable Output) 5-Lead SC-70 (C5) (Top View)
P2 · p02_fig02All Packages in PDF
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) — Functional Block Diagram
Functional Block Diagram
P2 · p02_fig03All Packages in PDF
MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) — MIC5376 Block Diagram
MIC5376 Block Diagram
Page 1 / 2 (15 extracted figures)

Technical Specifications & Part Details (MIC5376-2.8YMT-TZ)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) is a 4-pin standard electronic & interconnect component featuring a 1.00 × 1.00 × 0.85 mm mechanical envelope (lead pitch e = 0.46 mm). Rated for 2.5V to 5.5V supply operation across 40°C to 125°C with integrated Standard I/O / Passive interfaces.
Operating Supply VoltageV_CC / V_DD
2.5V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to 125°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1 kHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
29 µA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
1.00 × 1.00 × 0.85 mm (A1=0.03 mm)
Package family: DFN (UDFN-4-EP(1x1))
Pin Count & Lead PitchN / e
4 Pins | Pitch e = 0.46 mm (18.1 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
Standard I/O / Passive
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol5 auto-grouped pins
OK
IPC-7351B Land Pattern5 pads · Pitch 0.46mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (UDFN-4-EP(1x1))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
1.00 × 1.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.85mm · e=0.46mm
Pad Size (W × L)Level B
0.30 × 0.35 mm
Pins / Total PadsTopology
5P / 5Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
UDFN-4-EP(1x1)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1))?

Manufactured by MICROCHIP, the MIC5376-2.8YMT-TZ is housed in a UDFN-4-EP(1x1) package with 5 pins and a 0.46 mm lead pitch, supporting a VCC supply range of 2.5V to 5.5V. Key pins include: 1 (VOUT: Regulated Power Output (VOUT — 2.5V to 5.5V)), 2 (GND: Ground Reference Pin (GND)), 3 (EN: System Enable & Hardware Reset (EN)), 4 (VIN: Power Supply Input (VIN — 2.5V to 5.5V)), 5 (EP: Exposed Thermal & Ground Pad (EP)).

What are the IPC-7351B PCB Footprint dimensions for MIC5376-2.8YMT-TZ?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), MIC5376-2.8YMT-TZ (UDFN-4-EP(1x1)) has a nominal body envelope of 1.00 × 1.00 mm, pitch e = 0.46 mm, and 5 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for MIC5376-2.8YMT-TZ?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for MIC5376-2.8YMT-TZ (MICROCHIP, UDFN-4-EP(1x1)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (5 pins) & MIC5376 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1VOUTPower_OutRegulated power output rail (VOUT) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).
2GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
3ENDigital_IOChip enable and power-on reset control input (EN): High enables the SoC; Low powers down the chip into reset.
4VINPower_InPrimary positive power supply input (VIN) operating in the 2.5V to 5.5V domain (Max rating: 5.5V).
5EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.