25LC040X/ST (TSSOP-8) — Symbol, Footprint IPC-7351B & 3D STEP Model

25LC040X/ST

MICROCHIPTSSOP-8 · 8 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · 25LC040X/ST (TSSOP-8)1HOLD2VCC3CS4SO8SCK7SI6VSS5WPGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.810.25.10-5.1-10.2mm
2. 2D FOOTPRINT
12345678E=3.00mm · Pitch e=0.65mmD=4.40mm-5-4-3-2-101234543210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.00mm × 4.40mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (8/8)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1HOLDI/OMultiplexed I/O & Peripheral Pin HOLD (General)
2VCCPowerPower Supply Input (VCC — 1.8V to 5.5V)
3CSI/OMultiplexed I/O & Peripheral Pin CS (General)
4SOI/OMultiplexed I/O & Peripheral Pin SO (General)
5WPI/OMultiplexed I/O & Peripheral Pin WP (General)
6VSSGNDGround Reference Pin (VSS)
7SII/OMultiplexed I/O & Peripheral Pin SI (General)
8SCKI/OMultiplexed I/O & Peripheral Pin SCK (SPI)
PIN 1 HOLD
I/O
Multiplexed I/O & Peripheral Pin HOLD (General)
Design note: Hold Input
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
25LC040X/ST (TSSOP-8) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
25LC040X/ST (TSSOP-8) - 2. Standard Pinout (Top View)
True package pinout (8 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
25LC040X/ST (TSSOP-8) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
25LC040X/ST (TSSOP-8) - 4. Package Dimensions (D×E×A)
TSSOP-8 · 3.00×4.40mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
25LC040X/ST (TSSOP-8) - 5. Recommended Land Pattern
IPC-7351B Footprint (8 Pads)Expand ›
6. Application SchematicSCHEMATIC
25LC040X/ST (TSSOP-8) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for 25LC040X/ST
P1 · p01_fig011777×633px
25LC040X/ST (TSSOP-8) — 25AA040 1.8-5.5V 1 MHz I
25AA040 1.8-5.5V 1 MHz I
P1 · p01_fig021778×2560px
25LC040X/ST (TSSOP-8) — Please use 25AA040A or 25LC040A.
Please use 25AA040A or 25LC040A.
P15 · p15_fig011777×2517px
25LC040X/ST (TSSOP-8) — 25AA040/25LC040/25C040
25AA040/25LC040/25C040
P19 · p19_fig011776×2099px
25LC040X/ST (TSSOP-8) — 25AA040/25LC040/25C040
25AA040/25LC040/25C040
P12 · p12_fig01All Packages in PDF
25LC040X/ST (TSSOP-8) — 25AA040/25LC040/25C040
25AA040/25LC040/25C040
P14 · p14_fig01All Packages in PDF
25LC040X/ST (TSSOP-8) — 8-Lead Plastic Small Outline (SN) - Narrow, 150 mil (SOIC)
8-Lead Plastic Small Outline (SN) - Narrow, 150 mil (SOIC)

Technical Specifications & Part Details (25LC040X/ST)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:25LC040X/ST (TSSOP-8) is a 8-pin standard electronic & interconnect component featuring a 3.00 × 4.40 × 1.20 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 1.8V to 5.5V supply operation across -40°C to +85°C with integrated SPI interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
1 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 4.40 × 1.20 mm (A1=0.10 mm)
Package family: TSSOP (TSSOP-8)
Pin Count & Lead PitchN / e
8 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol8 auto-grouped pins
OK
IPC-7351B Land Pattern8 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TSSOP-8)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 4.40 mm
Height (A) & Pitch (e)IPC-7351B
A=1.20mm · e=0.65mm
Pad Size (W × L)Level B
0.42 × 1.45 mm
Pins / Total PadsTopology
8P / 8Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TSSOP-8
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — 25LC040X/ST (TSSOP-8)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of 25LC040X/ST (TSSOP-8)?

Manufactured by MICROCHIP, the 25LC040X/ST is housed in a TSSOP-8 package with 8 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 1.8V to 5.5V. Key pins include: 1 (HOLD: Multiplexed I/O & Peripheral Pin HOLD (General)), 2 (VCC: Power Supply Input (VCC — 1.8V to 5.5V)), 3 (CS: Multiplexed I/O & Peripheral Pin CS (General)), 4 (SO: Multiplexed I/O & Peripheral Pin SO (General)), 5 (WP: Multiplexed I/O & Peripheral Pin WP (General)), 6 (VSS: Ground Reference Pin (VSS)).

What are the IPC-7351B PCB Footprint dimensions for 25LC040X/ST?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), 25LC040X/ST (TSSOP-8) has a nominal body envelope of 4.40 × 3.00 mm, pitch e = 0.65 mm, and 8 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for 25LC040X/ST?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for 25LC040X/ST (MICROCHIP, TSSOP-8) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (8 pins) & 25LC040X/ST Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1HOLDDigital_IOSignal terminal HOLD (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: HOLD. Supported peripheral buses: General.
2VCCPower_InPrimary positive power supply input (VCC) operating in the 1.8V to 5.5V domain (Max rating: 5.5V).
3CSDigital_IOSignal terminal CS (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: CS. Supported peripheral buses: General.
4SODigital_IOSignal terminal SO (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: SO. Supported peripheral buses: General.
5WPDigital_IOSignal terminal WP (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: WP. Supported peripheral buses: General.
6VSSGND0V electrical ground return terminal (VSS) for internal core logic, I/O drivers, and analog sub-blocks.
7SIDigital_IOSignal terminal SI (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: SI. Supported peripheral buses: General.
8SCKDigital_IOSignal terminal SCK (I/O, 1.8V to 5.5V domain). Multiplexed alternate functions: SCK. Supported peripheral buses: SPI.