AT89LP2052-20XU (TSSOP-20) — Symbol, Footprint IPC-7351B & 3D STEP Model

AT89LP2052-20XU

MICROCHIPTSSOP-20 · 20 Pins · Pitch 0.65mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · AT89LP2052-20XU (TSSOP-20)1RST2P3.03P3.14XTAL25XTAL16P3.27P3.38P3.49P3.510GND20VCC19P1.718P1.617P1.516P1.415P1.314P1.213P1.112P1.011P3.7Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.817.812.77.62.5-2.5-7.6-12.7-17.8mm
2. 2D FOOTPRINT
1234567891011121314151617181920E=4.40mm · Pitch e=0.65mmD=6.50mm-5-4-3-2-1012345543210-1-2-3-4-5mm
3. 3D CAD MODEL
Package Body: 4.40mm × 6.50mm · Pitch: 0.65mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (20/20)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1RSTI/OMultiplexed I/O & Peripheral Pin RST (General)
2P3.0I/OMultiplexed I/O & Peripheral Pin P3.0 (UART)
3P3.1I/OMultiplexed I/O & Peripheral Pin P3.1 (UART)
4XTAL2I/OMultiplexed I/O & Peripheral Pin XTAL2 (RTC/CLK)
5XTAL1I/OMultiplexed I/O & Peripheral Pin XTAL1 (RTC/CLK)
6P3.2I/OMultiplexed I/O & Peripheral Pin P3.2 (General)
7P3.3I/OMultiplexed I/O & Peripheral Pin P3.3 (General)
8P3.4I/OMultiplexed I/O & Peripheral Pin P3.4 (PWM)
9P3.5I/OMultiplexed I/O & Peripheral Pin P3.5 (PWM)
10GNDGNDGround Reference Pin (GND)
11P3.7I/OMultiplexed I/O & Peripheral Pin P3.7 (General)
12P1.0I/OMultiplexed I/O & Peripheral Pin P1.0 (ADC)
13P1.1I/OMultiplexed I/O & Peripheral Pin P1.1 (ADC)
14P1.2I/OMultiplexed I/O & Peripheral Pin P1.2 (General)
15P1.3I/OMultiplexed I/O & Peripheral Pin P1.3 (General)
16P1.4I/OMultiplexed I/O & Peripheral Pin P1.4 (SPI)
17P1.5I/OMultiplexed I/O & Peripheral Pin P1.5 (SPI)
18P1.6I/OMultiplexed I/O & Peripheral Pin P1.6 (SPI)
19P1.7I/OMultiplexed I/O & Peripheral Pin P1.7 (SPI)
20VCCPowerPower Supply Input (VCC — 2.4V to 5.5V)
PIN 1 RST
I/O
Multiplexed I/O & Peripheral Pin RST (General)
Design note: RST: External Active-High Reset input. VPP: Parallel Programming Voltage. Raise to 12V to enable programming.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 10 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
AT89LP2052-20XU (TSSOP-20) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
AT89LP2052-20XU (TSSOP-20) - 2. Standard Pinout (Top View)
True package pinout (20 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
AT89LP2052-20XU (TSSOP-20) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
AT89LP2052-20XU (TSSOP-20) - 4. Package Dimensions (D×E×A)
TSSOP-20 · 4.40×6.50mm · Pitch 0.65mmExpand ›
5. Recommended Land PatternLAND PATTERN
AT89LP2052-20XU (TSSOP-20) - 5. Recommended Land Pattern
IPC-7351B Footprint (20 Pads)Expand ›
6. Application SchematicSCHEMATIC
AT89LP2052-20XU (TSSOP-20) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (10 figures · Page 1/1)
Showing 1–10 of 10 uncropped original figures for AT89LP2052
P1 · p01_fig01652×503px
AT89LP2052-20XU (TSSOP-20) — 8-bit Microcontroller with 2/4-Kbyte Flash
8-bit Microcontroller with 2/4-Kbyte Flash
P30 · p30_fig011361×614px
AT89LP2052-20XU (TSSOP-20) — Figure 16-6. Timer/Counter 1 PWM Mode 0
Figure 16-6. Timer/Counter 1 PWM Mode 0
P30 · p30_fig021378×813px
AT89LP2052-20XU (TSSOP-20) — Figure 16-7. Timer/Counter 1 PWM Mode 1
Figure 16-7. Timer/Counter 1 PWM Mode 1
P48 · p48_fig011788×590px
AT89LP2052-20XU (TSSOP-20) — Figure 19-4. SPI Transfer Format with CPHA = 0
Figure 19-4. SPI Transfer Format with CPHA = 0
P48 · p48_fig021788×593px
AT89LP2052-20XU (TSSOP-20) — Figure 19-5. SPI Transfer Format with CPHA = 1
Figure 19-5. SPI Transfer Format with CPHA = 1
P48 · p48_fig02P48
AT89LP2052-20XU (TSSOP-20) — Datasheet Page 48 (p48_fig02)
Datasheet Page 48 (p48_fig02)
P88 · p88_fig012124×2747px
AT89LP2052-20XU (TSSOP-20) — 88 | 3547J-MICRO-10/09 AT89LP2052/LP4052 | 26.3 20X - TSSOP | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 20X, (Formerly 20T), 20-lead, 4.4 mm Body Width, Plastic Thin Shrink Small Outline Package (TSSOP) C 20X |
88 | 3547J-MICRO-10/09 AT89LP2052/LP4052 | 26.3 20X - TSSOP | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 20X, (Formerly 20T), 20-lead, 4.4 mm Body Width, Plastic Thin Shrink Small Outline Package (TSSOP) C 20X |
P88 · p88_fig01P88
AT89LP2052-20XU (TSSOP-20) — Datasheet Page 88 (p88_fig01)
Datasheet Page 88 (p88_fig01)
P2 · p02_fig01All Packages in PDF
AT89LP2052-20XU (TSSOP-20) — 2.1 20-lead PDIP/SOIC/TSSOP
2.1 20-lead PDIP/SOIC/TSSOP
P86 · p86_fig01All Packages in PDF
AT89LP2052-20XU (TSSOP-20) — 86 | 3547J-MICRO-10/09 AT89LP2052/LP4052 | 26. Packaging Information | 26.1 20P3 - PDIP | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 20P3, 20-lead (0.300"/7.62 mm Wide) Plastic Dual Inline Package (PDIP) D 20P3 |
86 | 3547J-MICRO-10/09 AT89LP2052/LP4052 | 26. Packaging Information | 26.1 20P3 - PDIP | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 20P3, 20-lead (0.300"/7.62 mm Wide) Plastic Dual Inline Package (PDIP) D 20P3 |

Technical Specifications & Part Details (AT89LP2052-20XU)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:AT89LP2052-20XU (TSSOP-20) is a 20-pin standard electronic & interconnect component featuring a 6.50 × 4.40 × 1.20 mm mechanical envelope (lead pitch e = 0.65 mm). Rated for 2.4V to 5.5V supply operation across -40°C to +85°C with integrated UART, SPI, PWM, ADC, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
2.4V to 5.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
6.50 × 4.40 × 1.20 mm (A1=0.10 mm)
Package family: TSSOP (TSSOP-20)
Pin Count & Lead PitchN / e
20 Pins | Pitch e = 0.65 mm (25.6 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, PWM, ADC, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol20 auto-grouped pins
OK
IPC-7351B Land Pattern20 pads · Pitch 0.65mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (TSSOP-20)

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
6.50 × 4.40 mm
Height (A) & Pitch (e)IPC-7351B
A=1.20mm · e=0.65mm
Pad Size (W × L)Level B
0.42 × 1.45 mm
Pins / Total PadsTopology
20P / 20Pad (DUAL_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TSSOP-20
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — AT89LP2052-20XU (TSSOP-20)

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of AT89LP2052-20XU (TSSOP-20)?

Manufactured by MICROCHIP, the AT89LP2052-20XU is housed in a TSSOP-20 package with 20 pins and a 0.65 mm lead pitch, supporting a VCC supply range of 2.4V to 5.5V. Key pins include: 1 (RST: Multiplexed I/O & Peripheral Pin RST (General)), 2 (P3.0: Multiplexed I/O & Peripheral Pin P3.0 (UART)), 3 (P3.1: Multiplexed I/O & Peripheral Pin P3.1 (UART)), 4 (XTAL2: Multiplexed I/O & Peripheral Pin XTAL2 (RTC/CLK)), 5 (XTAL1: Multiplexed I/O & Peripheral Pin XTAL1 (RTC/CLK)), 6 (P3.2: Multiplexed I/O & Peripheral Pin P3.2 (General)).

What are the IPC-7351B PCB Footprint dimensions for AT89LP2052-20XU?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), AT89LP2052-20XU (TSSOP-20) has a nominal body envelope of 4.40 × 6.50 mm, pitch e = 0.65 mm, and 20 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for AT89LP2052-20XU?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for AT89LP2052-20XU (MICROCHIP, TSSOP-20) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (20 pins) & AT89LP2052 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1RSTDigital_IOSignal terminal RST (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: RST. Supported peripheral buses: General.
2P3.0Digital_IOSignal terminal P3.0 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P3.0. Supported peripheral buses: UART.
3P3.1Digital_IOSignal terminal P3.1 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P3.1. Supported peripheral buses: UART.
4XTAL2Digital_IOSignal terminal XTAL2 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: XTAL2. Supported peripheral buses: RTC/CLK.
5XTAL1Digital_IOSignal terminal XTAL1 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: XTAL1. Supported peripheral buses: RTC/CLK.
6P3.2Digital_IOSignal terminal P3.2 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P3.2. Supported peripheral buses: General.
7P3.3Digital_IOSignal terminal P3.3 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P3.3. Supported peripheral buses: General.
8P3.4Digital_IOSignal terminal P3.4 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P3.4. Supported peripheral buses: PWM.
9P3.5Digital_IOSignal terminal P3.5 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P3.5. Supported peripheral buses: PWM.
10GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
11P3.7Digital_IOSignal terminal P3.7 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P3.7. Supported peripheral buses: General.
12P1.0Digital_IOSignal terminal P1.0 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P1.0. Supported peripheral buses: ADC.
13P1.1Digital_IOSignal terminal P1.1 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P1.1. Supported peripheral buses: ADC.
14P1.2Digital_IOSignal terminal P1.2 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P1.2. Supported peripheral buses: General.
15P1.3Digital_IOSignal terminal P1.3 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: P1.3. Supported peripheral buses: General.
16P1.4Digital_IOSignal terminal P1.4 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: SPI. Supported peripheral buses: SPI.
17P1.5Digital_IOSignal terminal P1.5 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: SPI. Supported peripheral buses: SPI.
18P1.6Digital_IOSignal terminal P1.6 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: SPI. Supported peripheral buses: SPI.
19P1.7Digital_IOSignal terminal P1.7 (I/O, 2.4V to 5.5V domain). Multiplexed alternate functions: SPI_CLOCK. Supported peripheral buses: SPI.
20VCCPower_InPrimary positive power supply input (VCC) operating in the 2.4V to 5.5V domain (Max rating: 5.5V).