ATSAM4LC2CA-AUR (TQFP-100(14x14)) — Symbol, Footprint IPC-7351B & 3D STEP Model

ATSAM4LC2CA-AUR

MICROCHIPTQFP-100(14x14) · 100 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · ATSAM4LC2CA-AUR (TQFP-100(14x14))1PC002PC013Number of GP4PC035PA006PA017GND8IO09PC0410PC0511PC0612PA0213RESET_N14VDDCORE15GND16VDDOUT17VDDIN18TCK19PA0320PB0021PB0122PB0223PB0324PA0425PA0526XIN3227XOUT3228PB0429PB0530PB0631PB0732ADVREFN33GNDANA34ADVREFP35VDDANA36PC0737PC0838PC0939PC1040PC1141PC1242PC1343PC1444PA2445PB0646PA2547PA2648PA1049PA1150PA12100GND99PA2698PA2597VDDIO96PA2495PA2394PB1593PB1492PA2291PA2190PB1389PB1288VDDIO87VDDIO86PC3185PC3084PC2983PC2882PC2781PC2680PC2579PC2478PA2077PA1976PA1875PB1174PB1073PB0972PB0871PC2370PC2269PC2168PC2067PA1766PA1665PA1564PA1463PA1362PC1961PC1860PC1759PC1658PC1557VLCDIN56GND55BIASL54BIASH53VLCD52CAPL51CAPHGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.868.663.558.453.348.343.238.133.027.922.917.812.77.62.5-2.5-7.6-12.7-17.8-22.9-27.9-33.0-38.1-43.2-48.3-53.3-58.4-63.5-68.6mm
2. 2D FOOTPRINT
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100E=14.00mm · Pitch e=0.50mmD=14.00mm-12-10-8-6-4-2024681012121086420-2-4-6-8-10-12mm
3. 3D CAD MODEL
Package Body: 14.00mm × 14.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (100/100)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1PC00I/OMultiplexed I/O & Peripheral Pin PC00 (General)
2PC01I/OMultiplexed I/O & Peripheral Pin PC01 (General)
3Number of GPIO portsI/OMultiplexed I/O & Peripheral Pin Number of GPIO ports (General)
4PC03I/OMultiplexed I/O & Peripheral Pin PC03 (General)
5PA00I/OMultiplexed I/O & Peripheral Pin PA00 (General)
6PA01I/OMultiplexed I/O & Peripheral Pin PA01 (General)
7GNDGNDGround Reference Pin (GND)
8IO0I/OGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9PC04I/OMultiplexed I/O & Peripheral Pin PC04 (General)
10PC05I/OMultiplexed I/O & Peripheral Pin PC05 (General)
11PC06I/OMultiplexed I/O & Peripheral Pin PC06 (General)
12PA02I/OMultiplexed I/O & Peripheral Pin PA02 (General)
13RESET_NISystem Enable & Hardware Reset (RESET_N)
14VDDCOREPowerPower Supply Input (VDDCORE — 3.3V / 5.0V Standard Logic)
15GNDGNDGround Reference Pin (GND)
16VDDOUTPowerPower Supply Input (VDDOUT — 3.3V / 5.0V Standard Logic)
17VDDINPowerPower Supply Input (VDDIN — 3.3V / 5.0V Standard Logic)
18TCKI/OMultiplexed I/O & Peripheral Pin TCK (General)
19PA03I/OMultiplexed I/O & Peripheral Pin PA03 (General)
20PB00I/OMultiplexed I/O & Peripheral Pin PB00 (General)
21PB01I/OMultiplexed I/O & Peripheral Pin PB01 (General)
22PB02I/OMultiplexed I/O & Peripheral Pin PB02 (General)
23PB03I/OMultiplexed I/O & Peripheral Pin PB03 (General)
24PA04I/OMultiplexed I/O & Peripheral Pin PA04 (General)
25PA05I/OMultiplexed I/O & Peripheral Pin PA05 (General)
26XIN32I/OMultiplexed I/O & Peripheral Pin XIN32 (RTC/CLK)
27XOUT32I/OMultiplexed I/O & Peripheral Pin XOUT32 (RTC/CLK)
28PB04I/OMultiplexed I/O & Peripheral Pin PB04 (General)
29PB05I/OMultiplexed I/O & Peripheral Pin PB05 (General)
30PB06I/OMultiplexed I/O & Peripheral Pin PB06 (General)
31PB07I/OMultiplexed I/O & Peripheral Pin PB07 (General)
32ADVREFNAnalogMultiplexed I/O & Peripheral Pin ADVREFN (General)
33GNDANAGNDGround Reference Pin (GNDANA)
34ADVREFPAnalogMultiplexed I/O & Peripheral Pin ADVREFP (General)
35VDDANAPowerPower Supply Input (VDDANA — 3.3V / 5.0V Standard Logic)
36PC07I/OMultiplexed I/O & Peripheral Pin PC07 (General)
37PC08I/OMultiplexed I/O & Peripheral Pin PC08 (General)
38PC09I/OMultiplexed I/O & Peripheral Pin PC09 (General)
39PC10I/OMultiplexed I/O & Peripheral Pin PC10 (General)
40PC11I/OMultiplexed I/O & Peripheral Pin PC11 (General)
41PC12I/OMultiplexed I/O & Peripheral Pin PC12 (General)
42PC13I/OMultiplexed I/O & Peripheral Pin PC13 (General)
43PC14I/OMultiplexed I/O & Peripheral Pin PC14 (General)
44PA24I/OMultiplexed I/O & Peripheral Pin PA24 (SPI)
45PB06I/OMultiplexed I/O & Peripheral Pin PB06 (General)
46PA25I/OMultiplexed I/O & Peripheral Pin PA25 (USB)
47PA26I/OMultiplexed I/O & Peripheral Pin PA26 (USB)
48PA10I/OMultiplexed I/O & Peripheral Pin PA10 (General)
49PA11I/OMultiplexed I/O & Peripheral Pin PA11 (General)
50PA12I/OMultiplexed I/O & Peripheral Pin PA12 (General)
51CAPHI/OMultiplexed I/O & Peripheral Pin CAPH (General)
52CAPLI/OMultiplexed I/O & Peripheral Pin CAPL (General)
53VLCDI/OMultiplexed I/O & Peripheral Pin VLCD (General)
54BIASHI/OMultiplexed I/O & Peripheral Pin BIASH (General)
55BIASLI/OMultiplexed I/O & Peripheral Pin BIASL (General)
56GNDGNDGround Reference Pin (GND)
57VLCDINI/OMultiplexed I/O & Peripheral Pin VLCDIN (General)
58PC15I/OMultiplexed I/O & Peripheral Pin PC15 (General)
59PC16I/OMultiplexed I/O & Peripheral Pin PC16 (General)
60PC17I/OMultiplexed I/O & Peripheral Pin PC17 (General)
61PC18I/OMultiplexed I/O & Peripheral Pin PC18 (General)
62PC19I/OMultiplexed I/O & Peripheral Pin PC19 (General)
63PA13I/OMultiplexed I/O & Peripheral Pin PA13 (General)
64PA14I/OMultiplexed I/O & Peripheral Pin PA14 (General)
65PA15I/OMultiplexed I/O & Peripheral Pin PA15 (General)
66PA16I/OMultiplexed I/O & Peripheral Pin PA16 (General)
67PA17I/OMultiplexed I/O & Peripheral Pin PA17 (General)
68PC20I/OMultiplexed I/O & Peripheral Pin PC20 (General)
69PC21I/OMultiplexed I/O & Peripheral Pin PC21 (General)
70PC22I/OMultiplexed I/O & Peripheral Pin PC22 (General)
71PC23I/OMultiplexed I/O & Peripheral Pin PC23 (General)
72PB08I/OMultiplexed I/O & Peripheral Pin PB08 (General)
73PB09I/OMultiplexed I/O & Peripheral Pin PB09 (General)
74PB10I/OMultiplexed I/O & Peripheral Pin PB10 (General)
75PB11I/OMultiplexed I/O & Peripheral Pin PB11 (General)
76PA18I/OMultiplexed I/O & Peripheral Pin PA18 (General)
77PA19I/OMultiplexed I/O & Peripheral Pin PA19 (General)
78PA20I/OMultiplexed I/O & Peripheral Pin PA20 (General)
79PC24I/OMultiplexed I/O & Peripheral Pin PC24 (General)
80PC25I/OMultiplexed I/O & Peripheral Pin PC25 (General)
81PC26I/OMultiplexed I/O & Peripheral Pin PC26 (General)
82PC27I/OMultiplexed I/O & Peripheral Pin PC27 (General)
83PC28I/OMultiplexed I/O & Peripheral Pin PC28 (General)
84PC29I/OMultiplexed I/O & Peripheral Pin PC29 (General)
85PC30I/OMultiplexed I/O & Peripheral Pin PC30 (General)
86PC31I/OMultiplexed I/O & Peripheral Pin PC31 (General)
87VDDIOPowerPower Supply Input (VDDIO — 3.3V / 5.0V Standard Logic)
88VDDIOPowerPower Supply Input (VDDIO — 3.3V / 5.0V Standard Logic)
89PB12I/OMultiplexed I/O & Peripheral Pin PB12 (General)
90PB13I/OMultiplexed I/O & Peripheral Pin PB13 (General)
91PA21I/OMultiplexed I/O & Peripheral Pin PA21 (General)
92PA22I/OMultiplexed I/O & Peripheral Pin PA22 (General)
93PB14I/OMultiplexed I/O & Peripheral Pin PB14 (General)
94PB15I/OMultiplexed I/O & Peripheral Pin PB15 (General)
95PA23I/OMultiplexed I/O & Peripheral Pin PA23 (General)
96PA24I/OMultiplexed I/O & Peripheral Pin PA24 (General)
97VDDIOPowerPower Supply Input (VDDIO — 3.3V / 5.0V Standard Logic)
98PA25I/OMultiplexed I/O & Peripheral Pin PA25 (USB)
99PA26I/OMultiplexed I/O & Peripheral Pin PA26 (USB)
100GNDGNDGround Reference Pin (GND)
PIN 1 PC00
I/O
Multiplexed I/O & Peripheral Pin PC00 (General)
Design note: Signal terminal PC00 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC00. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 15 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
ATSAM4LC2CA-AUR (TQFP-100(14x14)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
ATSAM4LC2CA-AUR (TQFP-100(14x14)) - 2. Standard Pinout (Top View)
True package pinout (100 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
ATSAM4LC2CA-AUR (TQFP-100(14x14)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
ATSAM4LC2CA-AUR (TQFP-100(14x14)) - 4. Package Dimensions (D×E×A)
TQFP-100(14x14) · 14.00×14.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
ATSAM4LC2CA-AUR (TQFP-100(14x14)) - 5. Recommended Land Pattern
IPC-7351B Footprint (100 Pads)Expand ›
6. Application SchematicSCHEMATIC
ATSAM4LC2CA-AUR (TQFP-100(14x14)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (15 figures · Page 1/2)
Showing 1–12 of 15 uncropped original figures for ATSAM4LC2CA / ATSAM4LC8AA / ATSAM4LS8CA
P9 · p09_fig01EXACT PACKAGE
ATSAM4LC2CA-AUR (TQFP-100(14x14)) — Figure 3-1. ATSAM4LC TQFP100 Pinout
Figure 3-1. ATSAM4LC TQFP100 Pinout
P14 · p14_fig01EXACT PACKAGE
ATSAM4LC2CA-AUR (TQFP-100(14x14)) — Figure 3-6. ATSAM4LS TQFP100 Pinout
Figure 3-6. ATSAM4LS TQFP100 Pinout
P1079 · p1079_fig01EXACT PACKAGE
ATSAM4LC2CA-AUR (TQFP-100(14x14)) — Table 39-22. LCDCA Pinout vs Packages | Pin Cluster Package | TQFP100 TQFP64/QFN64 TQFP48/QFN48 | PA12 | A | COM0 COM0 COM0 | PA11 COM1 COM1 COM1 | PA10 COM2 COM2 COM2 | PA09 COM3 COM3 COM3 | PC15 SEG0 | PC16 SEG1 | PC17 SEG2 | PC18 SEG3 |
Table 39-22. LCDCA Pinout vs Packages | Pin Cluster Package | TQFP100 TQFP64/QFN64 TQFP48/QFN48 | PA12 | A | COM0 COM0 COM0 | PA11 COM1 COM1 COM1 | PA10 COM2 COM2 COM2 | PA09 COM3 COM3 COM3 | PC15 SEG0 | PC16 SEG1 | PC17 SEG2 | PC18 SEG3 |
P1 · p01_fig01680×503px
ATSAM4LC2CA-AUR (TQFP-100(14x14)) — SAM4L Series
SAM4L Series
P1 · p01_fig02581×146px
ATSAM4LC2CA-AUR (TQFP-100(14x14)) — ATSAM---e ARM-based Flash MCU
ATSAM---e ARM-based Flash MCU
P9 · p09_fig01P9
ATSAM4LC2CA-AUR (TQFP-100(14x14)) — Datasheet Page 9 (p09_fig01)
Datasheet Page 9 (p09_fig01)
P590 · p590_fig01903×533px
ATSAM4LC2CA-AUR (TQFP-100(14x14)) — Figure 24-16. Typical Connection to a RS485 Bus
Figure 24-16. Typical Connection to a RS485 Bus
P590 · p590_fig021730×721px
ATSAM4LC2CA-AUR (TQFP-100(14x14)) — Figure 24-18. Connection with a Remote Device for Hardware Handshaking
Figure 24-18. Connection with a Remote Device for Hardware Handshaking
P590 · p590_fig01P590
ATSAM4LC2CA-AUR (TQFP-100(14x14)) — Datasheet Page 590 (p590_fig01)
Datasheet Page 590 (p590_fig01)
P1080 · p1080_fig01827×1432px
ATSAM4LC2CA-AUR (TQFP-100(14x14)) — PC24 | B | SEG24 | PC25 SEG25 | PC26 SEG26 | PC27 SEG27 | PC28 SEG28 | PC29 SEG29 | PC30 SEG30 | PC31 SEG31 | PB12 | C | SEG32 SEG15 | PB13 SEG33 SEG16 | PA21 SEG34 SEG17 SEG9 | PA22 SEG35 SEG18 SEG10 | PB14 SEG36 SEG19 | PB15 SEG37 SEG20 |
PC24 | B | SEG24 | PC25 SEG25 | PC26 SEG26 | PC27 SEG27 | PC28 SEG28 | PC29 SEG29 | PC30 SEG30 | PC31 SEG31 | PB12 | C | SEG32 SEG15 | PB13 SEG33 SEG16 | PA21 SEG34 SEG17 SEG9 | PA22 SEG35 SEG18 SEG10 | PB14 SEG36 SEG19 | PB15 SEG37 SEG20 |
P7 · p07_fig01All Packages in PDF
ATSAM4LC2CA-AUR (TQFP-100(14x14)) — Packages TQFP/VFBGA TQFP/QFN/ WLCSP TQFP/QFN
Packages TQFP/VFBGA TQFP/QFN/ WLCSP TQFP/QFN
P13 · p13_fig01EXACT PACKAGE
ATSAM4LC2CA-AUR (TQFP-100(14x14)) — Figure 3-5. ATSAM4LC TQFP48/QFN48 Pinout [VQFN-48-EP(7x7)]
Figure 3-5. ATSAM4LC TQFP48/QFN48 Pinout [VQFN-48-EP(7x7)]
Page 1 / 2 (15 extracted figures)

Technical Specifications & Part Details (ATSAM4LC2CA-AUR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:ATSAM4LC2CA-AUR (TQFP-100(14x14)) is a 100-pin standard electronic & interconnect component featuring a 14.00 × 14.00 × 1.20 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated USB, UART, SPI, I2C, I2S, ADC, DAC, PWM, JTAG / SWD, IrDA, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
48MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
14.00 × 14.00 × 1.20 mm (A1=0.10 mm)
Package family: TQFP (TQFP-100(14x14))
Pin Count & Lead PitchN / e
100 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
USB, UART, SPI, I2C, I2S, ADC, DAC, PWM, JTAG / SWD, IrDA, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol100 auto-grouped pins
OK
IPC-7351B Land Pattern100 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteReflow 1:1 Standard
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified
IPC-7351B

Family Variants & Same Datasheet Chips — ATSAM4LC2CA / ATSAM4LC8AA / ATSAM4LS8CA (4)

Select package variant or sibling MPN sharing this datasheet

Mechanical Dimensions & Land Pattern (TQFP-100(14x14))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
14.00 × 14.00 mm
Height (A) & Pitch (e)IPC-7351B
A=1.20mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 1.25 mm
Pins / Total PadsTopology
100P / 100Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
TQFP-100(14x14)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — ATSAM4LC2CA-AUR (TQFP-100(14x14))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of ATSAM4LC2CA-AUR (TQFP-100(14x14))?

Manufactured by MICROCHIP, the ATSAM4LC2CA-AUR is housed in a TQFP-100(14x14) package with 100 pins and a 0.50 mm lead pitch. Key pins include: 1 (PC00: Multiplexed I/O & Peripheral Pin PC00 (General)), 2 (PC01: Multiplexed I/O & Peripheral Pin PC01 (General)), 3 (Number of GPIO ports: Multiplexed I/O & Peripheral Pin Number of GPIO ports (General)), 4 (PC03: Multiplexed I/O & Peripheral Pin PC03 (General)), 5 (PA00: Multiplexed I/O & Peripheral Pin PA00 (General)), 6 (PA01: Multiplexed I/O & Peripheral Pin PA01 (General)).

What are the IPC-7351B PCB Footprint dimensions for ATSAM4LC2CA-AUR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), ATSAM4LC2CA-AUR (TQFP-100(14x14)) has a nominal body envelope of 14.00 × 14.00 mm, pitch e = 0.50 mm, and 100 copper pads.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for ATSAM4LC2CA-AUR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for ATSAM4LC2CA-AUR (MICROCHIP, TQFP-100(14x14)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (100 pins) & ATSAM4LC2CA / ATSAM4LC8AA / ATSAM4LS8CA Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1PC00Digital_IOSignal terminal PC00 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC00. Supported peripheral buses: General.
2PC01Digital_IOSignal terminal PC01 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC01. Supported peripheral buses: General.
3Number of GPIO portsDigital_IOSignal terminal Number of GPIO ports (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: Number of GPIO ports. Supported peripheral buses: General.
4PC03Digital_IOSignal terminal PC03 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC03. Supported peripheral buses: General.
5PA00Digital_IOSignal terminal PA00 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA00. Supported peripheral buses: General.
6PA01Digital_IOSignal terminal PA01 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA01. Supported peripheral buses: General.
7GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
8IO0Digital_IOGPIO0 / RTC_GPIO0 (Chip Boot Mode Strapping Pin)
9PC04Digital_IOSignal terminal PC04 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC04. Supported peripheral buses: General.
10PC05Digital_IOSignal terminal PC05 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC05. Supported peripheral buses: General.
11PC06Digital_IOSignal terminal PC06 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC06. Supported peripheral buses: General.
12PA02Digital_IOSignal terminal PA02 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA02. Supported peripheral buses: General.
13RESET_NDigital_IOActive-low hardware reset terminal (RESET_N): pulling this pin Low resets the processor core and peripherals.
14VDDCOREPower_InPrimary positive power supply input (VDDCORE) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
15GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
16VDDOUTPower_InPrimary positive power supply input (VDDOUT) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
17VDDINPower_InPrimary positive power supply input (VDDIN) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
18TCKDigital_IOSignal terminal TCK (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: TCK. Supported peripheral buses: General.
19PA03Digital_IOSignal terminal PA03 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA03. Supported peripheral buses: General.
20PB00Digital_IOSignal terminal PB00 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB00. Supported peripheral buses: General.
21PB01Digital_IOSignal terminal PB01 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB01. Supported peripheral buses: General.
22PB02Digital_IOSignal terminal PB02 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB02. Supported peripheral buses: General.
23PB03Digital_IOSignal terminal PB03 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB03. Supported peripheral buses: General.
24PA04Digital_IOSignal terminal PA04 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA04. Supported peripheral buses: General.
25PA05Digital_IOSignal terminal PA05 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA05. Supported peripheral buses: General.
26XIN32Digital_IOSignal terminal XIN32 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: XIN32. Supported peripheral buses: RTC/CLK.
27XOUT32Digital_IOSignal terminal XOUT32 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: XOUT32. Supported peripheral buses: RTC/CLK.
28PB04Digital_IOSignal terminal PB04 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB04. Supported peripheral buses: General.
29PB05Digital_IOSignal terminal PB05 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB05. Supported peripheral buses: General.
30PB06Digital_IOSignal terminal PB06 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB06. Supported peripheral buses: General.
31PB07Digital_IOSignal terminal PB07 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB07. Supported peripheral buses: General.
32ADVREFNAnalogSignal terminal ADVREFN (Analog, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: ADVREFN. Supported peripheral buses: General.
33GNDANAGND0V electrical ground return terminal (GNDANA) for internal core logic, I/O drivers, and analog sub-blocks.
34ADVREFPAnalogSignal terminal ADVREFP (Analog, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: ADVREFP. Supported peripheral buses: General.
35VDDANAPower_InPrimary positive power supply input (VDDANA) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
36PC07Digital_IOSignal terminal PC07 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC07. Supported peripheral buses: General.
37PC08Digital_IOSignal terminal PC08 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC08. Supported peripheral buses: General.
38PC09Digital_IOSignal terminal PC09 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC09. Supported peripheral buses: General.
39PC10Digital_IOSignal terminal PC10 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC10. Supported peripheral buses: General.
40PC11Digital_IOSignal terminal PC11 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC11. Supported peripheral buses: General.
41PC12Digital_IOSignal terminal PC12 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC12. Supported peripheral buses: General.
42PC13Digital_IOSignal terminal PC13 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC13. Supported peripheral buses: General.
43PC14Digital_IOSignal terminal PC14 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC14. Supported peripheral buses: General.
44PA24Digital_IOSignal terminal PA24 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: SPI_NPCS0. Supported peripheral buses: SPI.
45PB06Digital_IOSignal terminal PB06 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB06. Supported peripheral buses: General.
46PA25Digital_IOSignal terminal PA25 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA25. Supported peripheral buses: USB.
47PA26Digital_IOSignal terminal PA26 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA26. Supported peripheral buses: USB.
48PA10Digital_IOSignal terminal PA10 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA10. Supported peripheral buses: General.
49PA11Digital_IOSignal terminal PA11 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA11. Supported peripheral buses: General.
50PA12Digital_IOSignal terminal PA12 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA12. Supported peripheral buses: General.
51CAPHDigital_IOSignal terminal CAPH (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CAPH. Supported peripheral buses: General.
52CAPLDigital_IOSignal terminal CAPL (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: CAPL. Supported peripheral buses: General.
53VLCDDigital_IOSignal terminal VLCD (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VLCD. Supported peripheral buses: General.
54BIASHDigital_IOSignal terminal BIASH (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BIASH. Supported peripheral buses: General.
55BIASLDigital_IOSignal terminal BIASL (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: BIASL. Supported peripheral buses: General.
56GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
57VLCDINDigital_IOSignal terminal VLCDIN (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: VLCDIN. Supported peripheral buses: General.
58PC15Digital_IOSignal terminal PC15 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC15. Supported peripheral buses: General.
59PC16Digital_IOSignal terminal PC16 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC16. Supported peripheral buses: General.
60PC17Digital_IOSignal terminal PC17 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC17. Supported peripheral buses: General.
61PC18Digital_IOSignal terminal PC18 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC18. Supported peripheral buses: General.
62PC19Digital_IOSignal terminal PC19 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PC19. Supported peripheral buses: General.
63PA13Digital_IOSignal terminal PA13 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA13. Supported peripheral buses: General.
64PA14Digital_IOSignal terminal PA14 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PA14. Supported peripheral buses: General.