ATTINY84-20MUR (WQFN-20-EP(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

ATTINY84-20MUR

MICROCHIPWQFN-20-EP(4x4) · 21 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · ATTINY84-20MUR (WQFN-20-EP(4x4))1IO12(ADC3/T0/PCI3(ADC2/AIN1/P4(ADC1/AIN0/P5(ADC0/AREF/P6DNC7DNC8GND9VCC10DNC11PB0(PCINT8/X21EP20IO919DNC18DNC17DNC16IO1815IO1714IO1613PB3(PCINT11/12PB1(PCINT9/XGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.820.315.210.25.10-5.1-10.2-15.2-20.3mm
2. 2D FOOTPRINT
123456789101112131415161718192021E=3.91mm · Pitch e=0.50mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.91mm × 4.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (21/21)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1IO1I/OGeneral Purpose Digital I/O Pin IO1
2(ADC3/T0/PCINT3)PA3I/OMultiplexed I/O & Peripheral Pin (ADC3/T0/PCINT3)PA3 (ADC)
3(ADC2/AIN1/PCINT2)PA2I/OMultiplexed I/O & Peripheral Pin (ADC2/AIN1/PCINT2)PA2 (ADC)
4(ADC1/AIN0/PCINT1)PA1I/OMultiplexed I/O & Peripheral Pin (ADC1/AIN0/PCINT1)PA1 (ADC)
5(ADC0/AREF/PCINT0)PA0I/OMultiplexed I/O & Peripheral Pin (ADC0/AREF/PCINT0)PA0 (ADC)
6DNCI/OMultiplexed I/O & Peripheral Pin DNC (General)
7DNCI/OMultiplexed I/O & Peripheral Pin DNC (General)
8GNDGNDGround Reference Pin (GND)
9VCCPowerPower Supply Input (VCC — 1.8V to 3.6V)
10DNCI/OMultiplexed I/O & Peripheral Pin DNC (General)
11PB0(PCINT8/XTAL1/CLKI)I/OMultiplexed I/O & Peripheral Pin PB0(PCINT8/XTAL1/CLKI) (RTC/CLK)
12PB1(PCINT9/XTAL2)I/OMultiplexed I/O & Peripheral Pin PB1(PCINT9/XTAL2) (RTC/CLK)
13PB3(PCINT11/RESET#/dW)ISystem Enable & Hardware Reset (PB3(PCINT11/RESET#/dW))
14IO16I/OGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15IO17I/OGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16IO18I/OGPIO18 / RTC_GPIO18 / U1RXD / ADC2_CH7 / CLK_OUT3
17DNCI/OMultiplexed I/O & Peripheral Pin DNC (General)
18DNCI/OMultiplexed I/O & Peripheral Pin DNC (General)
19DNCI/OMultiplexed I/O & Peripheral Pin DNC (General)
20IO9I/OGPIO9 / RTC_GPIO9 / TOUCH9 / ADC1_CH8 / FSPIHD
21EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 IO1
I/O
General Purpose Digital I/O Pin IO1
Design note: 3.3V logic domain (3.6V absolute max), 40mA max drive current.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 2 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
ATTINY84-20MUR (WQFN-20-EP(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
ATTINY84-20MUR (WQFN-20-EP(4x4)) - 2. Standard Pinout (Top View)
True package pinout (21 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
ATTINY84-20MUR (WQFN-20-EP(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
ATTINY84-20MUR (WQFN-20-EP(4x4)) - 4. Package Dimensions (D×E×A)
WQFN-20-EP(4x4) · 3.91×4.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
ATTINY84-20MUR (WQFN-20-EP(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (21 Pads)Expand ›
6. Application SchematicSCHEMATIC
ATTINY84-20MUR (WQFN-20-EP(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (2 figures · Page 1/1)
Showing 1–2 of 2 uncropped original figures for ATTINY84
P7 · p07_fig011909×2171px
ATTINY84-20MUR (WQFN-20-EP(4x4)) — Figure 3-2. PC
Figure 3-2. PC
P7 · p07_fig01P7
ATTINY84-20MUR (WQFN-20-EP(4x4)) — Datasheet Page 7 (p07_fig01)
Datasheet Page 7 (p07_fig01)

Technical Specifications & Part Details (ATTINY84-20MUR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:ATTINY84-20MUR (WQFN-20-EP(4x4)) is a 20-pin standard electronic & interconnect component featuring a 4.00 × 3.91 × 0.60 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V to 3.6V supply operation across 40°C to +85°C with integrated ADC, I2C, PWM, RTC/CLK, SPI interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 3.6V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
40°C to +85°C
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
4MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 3.91 × 0.60 mm (A1=0.03 mm)
Package family: QFN (WQFN-20-EP(4x4))
Pin Count & Lead PitchN / e
20 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
ADC, I2C, PWM, RTC/CLK, SPI
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol21 auto-grouped pins
OK
IPC-7351B Land Pattern21 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.60×2.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (WQFN-20-EP(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 3.91 mm
Height (A) & Pitch (e)IPC-7351B
A=0.60mm · e=0.50mm
Pad Size (W × L)Level B
0.28 × 0.80 mm
Pins / Total PadsTopology
21P / 21Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
WQFN-20-EP(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — ATTINY84-20MUR (WQFN-20-EP(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of ATTINY84-20MUR (WQFN-20-EP(4x4))?

Manufactured by MICROCHIP, the ATTINY84-20MUR is housed in a WQFN-20-EP(4x4) package with 21 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.8V to 3.6V. Key pins include: 1 (IO1: General Purpose Digital I/O Pin IO1), 2 ((ADC3/T0/PCINT3)PA3: Multiplexed I/O & Peripheral Pin (ADC3/T0/PCINT3)PA3 (ADC)), 3 ((ADC2/AIN1/PCINT2)PA2: Multiplexed I/O & Peripheral Pin (ADC2/AIN1/PCINT2)PA2 (ADC)), 4 ((ADC1/AIN0/PCINT1)PA1: Multiplexed I/O & Peripheral Pin (ADC1/AIN0/PCINT1)PA1 (ADC)), 5 ((ADC0/AREF/PCINT0)PA0: Multiplexed I/O & Peripheral Pin (ADC0/AREF/PCINT0)PA0 (ADC)), 6 (DNC: Multiplexed I/O & Peripheral Pin DNC (General)).

What are the IPC-7351B PCB Footprint dimensions for ATTINY84-20MUR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), ATTINY84-20MUR (WQFN-20-EP(4x4)) has a nominal body envelope of 3.91 × 4.00 mm, pitch e = 0.50 mm, and 21 copper pads plus a central exposed thermal pad (EPAD) of 2.60 × 2.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for ATTINY84-20MUR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for ATTINY84-20MUR (MICROCHIP, WQFN-20-EP(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (21 pins) & ATTINY84 Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1IO1Digital_IOGeneral Purpose Digital I/O Pin IO1
2(ADC3/T0/PCINT3)PA3AnalogSignal terminal (ADC3/T0/PCINT3)PA3 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: (ADC3/T0/PCINT3)PA3. Supported peripheral buses: ADC.
3(ADC2/AIN1/PCINT2)PA2AnalogSignal terminal (ADC2/AIN1/PCINT2)PA2 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: (ADC2/AIN1/PCINT2)PA2. Supported peripheral buses: ADC.
4(ADC1/AIN0/PCINT1)PA1AnalogSignal terminal (ADC1/AIN0/PCINT1)PA1 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: (ADC1/AIN0/PCINT1)PA1. Supported peripheral buses: ADC.
5(ADC0/AREF/PCINT0)PA0AnalogSignal terminal (ADC0/AREF/PCINT0)PA0 (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: (ADC0/AREF/PCINT0)PA0. Supported peripheral buses: ADC.
6DNCNCSignal terminal DNC (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: DNC. Supported peripheral buses: General.
7DNCNCSignal terminal DNC (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: DNC. Supported peripheral buses: General.
8GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
9VCCPower_InPrimary positive power supply input (VCC) operating in the 1.8V to 3.6V domain (Max rating: 3.6V).
10DNCNCSignal terminal DNC (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: DNC. Supported peripheral buses: General.
11PB0(PCINT8/XTAL1/CLKI)Digital_IOSignal terminal PB0(PCINT8/XTAL1/CLKI) (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: PB0(PCINT8/XTAL1/CLKI). Supported peripheral buses: RTC/CLK.
12PB1(PCINT9/XTAL2)Digital_IOSignal terminal PB1(PCINT9/XTAL2) (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: PB1(PCINT9/XTAL2). Supported peripheral buses: RTC/CLK.
13PB3(PCINT11/RESET#/dW)Digital_IOActive-low hardware reset terminal (PB3(PCINT11/RESET#/dW)): pulling this pin Low resets the processor core and peripherals.
14IO16Digital_IOGPIO16 / RTC_GPIO16 / U0CTS / ADC2_CH5 / XTAL_32K_N
15IO17Digital_IOGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16IO18Digital_IOGPIO18 / RTC_GPIO18 / U1RXD / ADC2_CH7 / CLK_OUT3
17DNCNCSignal terminal DNC (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: DNC. Supported peripheral buses: General.
18DNCNCSignal terminal DNC (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: DNC. Supported peripheral buses: General.
19DNCNCSignal terminal DNC (I/O, 1.8V to 3.6V domain). Multiplexed alternate functions: DNC. Supported peripheral buses: General.
20IO9Digital_IOGPIO9 / RTC_GPIO9 / TOUCH9 / ADC1_CH8 / FSPIHD
21EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.