ATTINY2313V-10MUR (QFN-20-EP(4x4)) — Symbol, Footprint IPC-7351B & 3D STEP Model

ATTINY2313V-10MUR

MICROCHIPQFN-20-EP(4x4) · 21 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · ATTINY2313V-10MUR (QFN-20-EP(4x4))1(TXD)PD12XTAL2)PA13(XTAL1)PA04(CKOUT/XCK/I5(INT1)PD36(T0)PD47(OC0B/T1)PD58GND9(ICP)PD610(AIN0/PCINT011PB1(AIN1/PCI21EP20PD0(RXD)19PA2(RESET#/d18VCC17PB7(UCSK/SCK16PB6(MISO/DO/15IO1714PB4(OC1B/PCI13PB3(OC1A/PCI12PB2(OC0A/PCIGrid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.820.315.210.25.10-5.1-10.2-15.2-20.3mm
2. 2D FOOTPRINT
123456789101112131415161718192021E=4.00mm · Pitch e=0.50mmD=4.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 4.00mm × 4.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (21/21)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1(TXD)PD1I/OMultiplexed I/O & Peripheral Pin (TXD)PD1 (UART)
2XTAL2)PA1I/OMultiplexed I/O & Peripheral Pin XTAL2)PA1 (RTC/CLK)
3(XTAL1)PA0I/OMultiplexed I/O & Peripheral Pin (XTAL1)PA0 (RTC/CLK)
4(CKOUT/XCK/INT0)PD2I/OMultiplexed I/O & Peripheral Pin (CKOUT/XCK/INT0)PD2 (General)
5(INT1)PD3I/OMultiplexed I/O & Peripheral Pin (INT1)PD3 (General)
6(T0)PD4I/OMultiplexed I/O & Peripheral Pin (T0)PD4 (General)
7(OC0B/T1)PD5I/OMultiplexed I/O & Peripheral Pin (OC0B/T1)PD5 (PWM)
8GNDGNDGround Reference Pin (GND)
9(ICP)PD6I/OMultiplexed I/O & Peripheral Pin (ICP)PD6 (General)
10(AIN0/PCINT0)PB0I/OMultiplexed I/O & Peripheral Pin (AIN0/PCINT0)PB0 (ADC)
11PB1(AIN1/PCINT1)I/OMultiplexed I/O & Peripheral Pin PB1(AIN1/PCINT1) (ADC)
12PB2(OC0A/PCINT2)I/OMultiplexed I/O & Peripheral Pin PB2(OC0A/PCINT2) (PWM)
13PB3(OC1A/PCINT3)I/OMultiplexed I/O & Peripheral Pin PB3(OC1A/PCINT3) (PWM)
14PB4(OC1B/PCINT4)I/OMultiplexed I/O & Peripheral Pin PB4(OC1B/PCINT4) (PWM)
15IO17I/OGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16PB6(MISO/DO/PCINT6)I/OMultiplexed I/O & Peripheral Pin PB6(MISO/DO/PCINT6) (SPI)
17PB7(UCSK/SCK/PCINT7)I/OMultiplexed I/O & Peripheral Pin PB7(UCSK/SCK/PCINT7) (SPI)
18VCCPowerPower Supply Input (VCC — 3.3V / 5.0V Standard Logic)
19PA2(RESET#/dW)ISystem Enable & Hardware Reset (PA2(RESET#/dW))
20PD0(RXD)I/OMultiplexed I/O & Peripheral Pin PD0(RXD) (UART)
21EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 (TXD)PD1
I/O
Multiplexed I/O & Peripheral Pin (TXD)PD1 (UART)
Design note: Signal terminal (TXD)PD1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (TXD)PD1. Supported peripheral buses: UART.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 6 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
ATTINY2313V-10MUR (QFN-20-EP(4x4)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
ATTINY2313V-10MUR (QFN-20-EP(4x4)) - 2. Standard Pinout (Top View)
True package pinout (21 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
ATTINY2313V-10MUR (QFN-20-EP(4x4)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
ATTINY2313V-10MUR (QFN-20-EP(4x4)) - 4. Package Dimensions (D×E×A)
QFN-20-EP(4x4) · 4.00×4.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
ATTINY2313V-10MUR (QFN-20-EP(4x4)) - 5. Recommended Land Pattern
IPC-7351B Footprint (21 Pads)Expand ›
6. Application SchematicSCHEMATIC
ATTINY2313V-10MUR (QFN-20-EP(4x4)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (6 figures · Page 1/1)
Showing 1–6 of 6 uncropped original figures for ATTINY2313V
P1 · p01_fig01652×376px
ATTINY2313V-10MUR (QFN-20-EP(4x4)) — 8-bit Microcontroller with 2K Bytes In-System Programmable Flash
8-bit Microcontroller with 2K Bytes In-System Programmable Flash
P2 · p02_fig01954×1490px
ATTINY2313V-10MUR (QFN-20-EP(4x4)) — Figure 1. Pinout ATtiny2313
Figure 1. Pinout ATtiny2313
P2 · p02_fig01P2
ATTINY2313V-10MUR (QFN-20-EP(4x4)) — Datasheet Page 2 (p02_fig01)
Datasheet Page 2 (p02_fig01)
P14 · p14_fig012124×2747px
ATTINY2313V-10MUR (QFN-20-EP(4x4)) — 14 | 2543MS-AVR-10/16 ATtiny2313 | 20M1 | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. REV. 20M1, 20-pad, 4 x 4 x 0.8 mm Body, Lead Pitch 0.50 mm, B 20M1 | 12/02/2014 | 2.6 mm Exposed Pad, Micro Lead Frame Package (MLF) | A 0
14 | 2543MS-AVR-10/16 ATtiny2313 | 20M1 | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. REV. 20M1, 20-pad, 4 x 4 x 0.8 mm Body, Lead Pitch 0.50 mm, B 20M1 | 12/02/2014 | 2.6 mm Exposed Pad, Micro Lead Frame Package (MLF) | A 0
P14 · p14_fig01P14
ATTINY2313V-10MUR (QFN-20-EP(4x4)) — Datasheet Page 14 (p14_fig01)
Datasheet Page 14 (p14_fig01)
P12 · p12_fig01All Packages in PDF
ATTINY2313V-10MUR (QFN-20-EP(4x4)) — 12 | 2543MS-AVR-10/16 ATtiny2313 | Packaging Information | 20P3 | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 20P3, 20-lead (0.300"/7.62 mm Wide) Plastic Dual Inline Package (PDIP) D 20P3 | 2010-10-19 | PIN 1 | E1
12 | 2543MS-AVR-10/16 ATtiny2313 | Packaging Information | 20P3 | 2325 Orchard Parkway San Jose, CA 95131 | TITLE DRAWING NO. | R | REV. 20P3, 20-lead (0.300"/7.62 mm Wide) Plastic Dual Inline Package (PDIP) D 20P3 | 2010-10-19 | PIN 1 | E1

Technical Specifications & Part Details (ATTINY2313V-10MUR)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:ATTINY2313V-10MUR (QFN-20-EP(4x4)) is a 20-pin standard electronic & interconnect component featuring a 4.00 × 4.00 × 0.75 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V ~ 5.5V (Theo Datasheet) supply operation across -40°C ~ +85°C (Industrial Grade) with integrated UART, SPI, I2C, PWM, ADC, RTC/CLK interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V ~ 5.5V (Theo Datasheet)
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
4.00 × 4.00 × 0.75 mm (A1=0.03 mm)
Package family: QFN (QFN-20-EP(4x4))
Pin Count & Lead PitchN / e
20 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
UART, SPI, I2C, PWM, ADC, RTC/CLK
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol21 auto-grouped pins
OK
IPC-7351B Land Pattern21 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.60×2.60mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (QFN-20-EP(4x4))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
4.00 × 4.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.75mm · e=0.50mm
Pad Size (W × L)Level B
0.27 × 0.80 mm
Pins / Total PadsTopology
21P / 21Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
QFN-20-EP(4x4)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — ATTINY2313V-10MUR (QFN-20-EP(4x4))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of ATTINY2313V-10MUR (QFN-20-EP(4x4))?

Manufactured by MICROCHIP, the ATTINY2313V-10MUR is housed in a QFN-20-EP(4x4) package with 21 pins and a 0.50 mm lead pitch. Key pins include: 1 ((TXD)PD1: Multiplexed I/O & Peripheral Pin (TXD)PD1 (UART)), 2 (XTAL2)PA1: Multiplexed I/O & Peripheral Pin XTAL2)PA1 (RTC/CLK)), 3 ((XTAL1)PA0: Multiplexed I/O & Peripheral Pin (XTAL1)PA0 (RTC/CLK)), 4 ((CKOUT/XCK/INT0)PD2: Multiplexed I/O & Peripheral Pin (CKOUT/XCK/INT0)PD2 (General)), 5 ((INT1)PD3: Multiplexed I/O & Peripheral Pin (INT1)PD3 (General)), 6 ((T0)PD4: Multiplexed I/O & Peripheral Pin (T0)PD4 (General)).

What are the IPC-7351B PCB Footprint dimensions for ATTINY2313V-10MUR?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), ATTINY2313V-10MUR (QFN-20-EP(4x4)) has a nominal body envelope of 4.00 × 4.00 mm, pitch e = 0.50 mm, and 21 copper pads plus a central exposed thermal pad (EPAD) of 2.60 × 2.60 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for ATTINY2313V-10MUR?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for ATTINY2313V-10MUR (MICROCHIP, QFN-20-EP(4x4)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (21 pins) & ATTINY2313V Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1(TXD)PD1Digital_IOSignal terminal (TXD)PD1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (TXD)PD1. Supported peripheral buses: UART.
2XTAL2)PA1Digital_IOSignal terminal XTAL2)PA1 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: XTAL2)PA1. Supported peripheral buses: RTC/CLK.
3(XTAL1)PA0Digital_IOSignal terminal (XTAL1)PA0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (XTAL1)PA0. Supported peripheral buses: RTC/CLK.
4(CKOUT/XCK/INT0)PD2Digital_IOSignal terminal (CKOUT/XCK/INT0)PD2 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (CKOUT/XCK/INT0)PD2. Supported peripheral buses: General.
5(INT1)PD3Digital_IOSignal terminal (INT1)PD3 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (INT1)PD3. Supported peripheral buses: General.
6(T0)PD4Digital_IOSignal terminal (T0)PD4 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (T0)PD4. Supported peripheral buses: General.
7(OC0B/T1)PD5Digital_IOSignal terminal (OC0B/T1)PD5 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (OC0B/T1)PD5. Supported peripheral buses: PWM.
8GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
9(ICP)PD6Digital_IOSignal terminal (ICP)PD6 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (ICP)PD6. Supported peripheral buses: General.
10(AIN0/PCINT0)PB0AnalogSignal terminal (AIN0/PCINT0)PB0 (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: (AIN0/PCINT0)PB0. Supported peripheral buses: ADC.
11PB1(AIN1/PCINT1)AnalogSignal terminal PB1(AIN1/PCINT1) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB1(AIN1/PCINT1). Supported peripheral buses: ADC.
12PB2(OC0A/PCINT2)Digital_IOSignal terminal PB2(OC0A/PCINT2) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB2(OC0A/PCINT2). Supported peripheral buses: PWM.
13PB3(OC1A/PCINT3)Digital_IOSignal terminal PB3(OC1A/PCINT3) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB3(OC1A/PCINT3). Supported peripheral buses: PWM.
14PB4(OC1B/PCINT4)Digital_IOSignal terminal PB4(OC1B/PCINT4) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB4(OC1B/PCINT4). Supported peripheral buses: PWM.
15IO17Digital_IOGPIO17 / RTC_GPIO17 / U1TXD / ADC2_CH6
16PB6(MISO/DO/PCINT6)Digital_IOSignal terminal PB6(MISO/DO/PCINT6) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB6(MISO/DO/PCINT6). Supported peripheral buses: SPI.
17PB7(UCSK/SCK/PCINT7)Digital_IOSignal terminal PB7(UCSK/SCK/PCINT7) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PB7(UCSK/SCK/PCINT7). Supported peripheral buses: SPI.
18VCCPower_InPrimary positive power supply input (VCC) operating in the 3.3V / 5.0V Standard Logic domain (Max rating: 5.5V).
19PA2(RESET#/dW)Digital_IOActive-low hardware reset terminal (PA2(RESET#/dW)): pulling this pin Low resets the processor core and peripherals.
20PD0(RXD)Digital_IOSignal terminal PD0(RXD) (I/O, 3.3V / 5.0V Standard Logic domain). Multiplexed alternate functions: PD0(RXD). Supported peripheral buses: UART.
21EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.