ATTINY13A-MMF (VFDFN-10(3x3)) — Symbol, Footprint IPC-7351B & 3D STEP Model

ATTINY13A-MMF

MICROCHIPVFDFN-10(3x3) · 9 Pins · Pitch 0.50mmIPC-7351B Verified5.0 (0)
SYNCHRONIZED 4D CROSS-PROBE MODETouch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
1. SYMBOL
U1 · ATTINY13A-MMF (VFDFN-10(3x3))1PB52PB33DNC4PB45GND11EP8DNC7PB16PB0Grid Pitch = 2.54mm (IEEE-315)-17.8-12.7-7.6-2.52.57.612.717.812.77.62.5-2.5-7.6-12.7mm
2. 2D FOOTPRINT
1234567811E=3.00mm · Pitch e=0.50mmD=3.00mm-4-3-2-10123443210-1-2-3-4mm
3. 3D CAD MODEL
Package Body: 3.00mm × 3.00mm · Pitch: 0.50mm · Ruler Step: 1.00mmSynced <100ms

Synchronized Pinout (Symbol / 2D / 3D) (9/9)

Touch or hover any pin to highlight concurrently across Symbol, Footprint and 3D
PinSymbolTypeFunction (EN)
1PB5I/OMultiplexed I/O & Peripheral Pin PB5 (General)
2PB3I/OMultiplexed I/O & Peripheral Pin PB3 (General)
3DNCI/OMultiplexed I/O & Peripheral Pin DNC (General)
4PB4I/OMultiplexed I/O & Peripheral Pin PB4 (General)
5GNDGNDGround Reference Pin (GND)
6PB0I/OMultiplexed I/O & Peripheral Pin PB0 (General)
7PB1I/OMultiplexed I/O & Peripheral Pin PB1 (General)
8DNCI/OMultiplexed I/O & Peripheral Pin DNC (General)
11EPGNDExposed Thermal & Ground Pad (EP)
PIN 1 PB5
I/O
Multiplexed I/O & Peripheral Pin PB5 (General)
Design note: Signal terminal PB5 (I/O, 1.8V to 4.5V domain). Multiplexed alternate functions: PB5. Supported peripheral buses: General.
IPC-7351B Solder Density & Span C/G/Z Tuner

Extracted Drawings Gallery (6 Standard Drawings + 9 Extracted Figures)

Read the original datasheet PDF directly or click any drawing to view fullscreen
1. Realistic 3D PackageREPRESENTATIVE
ATTINY13A-MMF (VFDFN-10(3x3)) - 1. Realistic 3D Package
Detailed solid 3D bodyExpand ›
2. Standard Pinout (Top View)CLEANROOM PINOUT
ATTINY13A-MMF (VFDFN-10(3x3)) - 2. Standard Pinout (Top View)
True package pinout (9 pins)Expand ›
3. Original Datasheet PinoutPDF PINOUT
ATTINY13A-MMF (VFDFN-10(3x3)) - 3. Original Datasheet Pinout
Uncropped datasheet pin diagramExpand ›
4. Package Dimensions (D×E×A)PACKAGE DIMENSIONS
ATTINY13A-MMF (VFDFN-10(3x3)) - 4. Package Dimensions (D×E×A)
VFDFN-10(3x3) · 3.00×3.00mm · Pitch 0.50mmExpand ›
5. Recommended Land PatternLAND PATTERN
ATTINY13A-MMF (VFDFN-10(3x3)) - 5. Recommended Land Pattern
IPC-7351B Footprint (9 Pads)Expand ›
6. Application SchematicSCHEMATIC
ATTINY13A-MMF (VFDFN-10(3x3)) - 6. Application Schematic
Typical Application SchematicExpand ›
Original Datasheet Pinouts & Technical Drawings (9 figures · Page 1/1)
Showing 1–9 of 9 uncropped original figures for ATTINY13A
P1 · p01_fig01376×200px
ATTINY13A-MMF (VFDFN-10(3x3)) — Introduction
Introduction
P8 · p08_fig011686×2013px
ATTINY13A-MMF (VFDFN-10(3x3)) — Figure 1-1. Pinout of ATtiny13A
Figure 1-1. Pinout of ATtiny13A
P8 · p08_fig01P8
ATTINY13A-MMF (VFDFN-10(3x3)) — Datasheet Page 8 (p08_fig01)
Datasheet Page 8 (p08_fig01)
P69 · p69_fig011572×1123px
ATTINY13A-MMF (VFDFN-10(3x3)) — Figure 11-4. Compare Match Output Unit, Schematic
Figure 11-4. Compare Match Output Unit, Schematic
P169 · p169_fig012041×2564px
ATTINY13A-MMF (VFDFN-10(3x3)) —  2021 Microchip Technology Inc. Data Sheet Complete DS40002307A-page 169 | 23. Packaging Information | 23.1 8P3 | B | A | For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microch
 2021 Microchip Technology Inc. Data Sheet Complete DS40002307A-page 169 | 23. Packaging Information | 23.1 8P3 | B | A | For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microch
P176 · p176_fig011922×2458px
ATTINY13A-MMF (VFDFN-10(3x3)) —  2021 Microchip Technology Inc. Data Sheet Complete DS40002307A-page 176 | RECOMMENDED LAND PATTERN | Microchip Technology Drawing C04-2057-SN Rev F | BSC: Basic Dimension. Theoretically exact value shown without tolerances. | Notes: | Dim
 2021 Microchip Technology Inc. Data Sheet Complete DS40002307A-page 176 | RECOMMENDED LAND PATTERN | Microchip Technology Drawing C04-2057-SN Rev F | BSC: Basic Dimension. Theoretically exact value shown without tolerances. | Notes: | Dim
P179 · p179_fig011916×2515px
ATTINY13A-MMF (VFDFN-10(3x3)) —  2021 Microchip Technology Inc. Data Sheet Complete DS40002307A-page 179 | RECOMMENDED LAND PATTERN | Dimension Limits Units | C2 | Optional Center Pad Width | Contact Pad Spacing | Optional Center Pad Length | Contact Pitch | Y2 X2 | 2.75
 2021 Microchip Technology Inc. Data Sheet Complete DS40002307A-page 179 | RECOMMENDED LAND PATTERN | Dimension Limits Units | C2 | Optional Center Pad Width | Contact Pad Spacing | Optional Center Pad Length | Contact Pitch | Y2 X2 | 2.75
P179 · p179_fig01P179
ATTINY13A-MMF (VFDFN-10(3x3)) — Datasheet Page 179 (p179_fig01)
Datasheet Page 179 (p179_fig01)
P175 · p175_fig01All Packages in PDF
ATTINY13A-MMF (VFDFN-10(3x3)) —  2021 Microchip Technology Inc. Data Sheet Complete DS40002307A-page 175 | Microchip Technology Drawing No. C04-057-SN Rev F Sheet 2 of 2 | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] | For the most current p
 2021 Microchip Technology Inc. Data Sheet Complete DS40002307A-page 175 | Microchip Technology Drawing No. C04-057-SN Rev F Sheet 2 of 2 | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] | For the most current p

Technical Specifications & Part Details (ATTINY13A-MMF)

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet (EN)
Standard Electronic & Interconnect Component
Detailed Overview:ATTINY13A-MMF (VFDFN-10(3x3)) is a 10-pin standard electronic & interconnect component featuring a 3.00 × 3.00 × 0.90 mm mechanical envelope (lead pitch e = 0.50 mm). Rated for 1.8V to 4.5V supply operation across -40°C ~ +85°C (Industrial Grade) with integrated SPI, ADC, PWM interfaces.
Operating Supply VoltageV_CC / V_DD
1.8V to 4.5V
Place 100nF + 10µF X7R decoupling capacitors < 2mm from supply pins
Ambient Operating TemperatureT_A
-40°C ~ +85°C (Industrial Grade)
Industrial temperature grade; T_J(max) = +125°C
Clock / RF Operating Frequencyf_CLK / f_RF
20 MHz
Extracted from authoritative PDF specification tables
Current & Power RatingI_OUT / I_CC
I_GPIO(max) = ±20 mA / pin | I_VDD(total) ≤ 150 mA
Observe per-pin absolute maximum current limits
Package Envelope (D × E × A)D × E × A
3.00 × 3.00 × 0.90 mm (A1=0.03 mm)
Package family: QFN (VFDFN-10(3x3))
Pin Count & Lead PitchN / e
10 Pins | Pitch e = 0.50 mm (19.7 mil)
Normalized to Center-to-Center Span C per IPC-7351B
Integrated Peripheral InterfacesBuses
SPI, ADC, PWM
Cross-linked with 4D Pinout & Schematic Symbol
Reflow & Moisture SensitivityIPC / MSL
IPC-7351B Level B | J-STD-020 (Peak 260°C) | MSL-3
60% windowed solder paste stencil on thermal EPAD
Engineering Safety Alert: Verify Pin-1 chamfer orientation on Top Silkscreen prior to SMT pick-and-place assembly.
Engineering Safety Alert: Connect exposed thermal pad (if present) to internal ground plane via 0.3mm stitched thermal vias.

5-Point Standards Verification

Automated compliance checks prior to export
5/5 PASS
IEEE-315 Symbol9 auto-grouped pins
OK
IPC-7351B Land Pattern9 pads · Pitch 0.50mm
OK
IPC-7525 60% Solder PasteEPAD 2.75×2.75mm windowed grid
OK
DFM Rules JLCPCB / PCBWayMin pad clearance: 0.25mm
OK
3D STEP AP214 & GLBAligned coordinate origin (0,0,0)
OK

Hardware Verification & Community Engineering Reviews

Summary of electrical parameters, mechanical dimensions, voltage range and peripheral interfaces from Datasheet
5.00 PCB Verified

Mechanical Dimensions & Land Pattern (VFDFN-10(3x3))

Extracted from Datasheet & IPC-7351B Normalized
mm
Package Body (D × E)Nominal
3.00 × 3.00 mm
Height (A) & Pitch (e)IPC-7351B
A=0.90mm · e=0.50mm
Pad Size (W × L)Level B
0.30 × 0.80 mm
Pins / Total PadsTopology
9P / 9Pad (QUAD_ROW)

Recommended Companion BOM & Drop-In Equivalents

Passive external components per reference schematic and 1:1 pin-compatible alternatives
DFM READY
Designator / Replacement MPNValue / PackageFunction & PCB Layout Rule
N/A
BOM
Per application circuit
VFDFN-10(3x3)
Size power & signal trace widths for rated load current following IPC-2221 clearance rules.

Technical Frequently Asked Questions (FAQ) — ATTINY13A-MMF (VFDFN-10(3x3))

Quick answers covering Pinout, IPC-7351B Land Pattern dimensions, and CAD export formats
IPC-7351B / IEEE-315

What is the Pinout and operating voltage specification of ATTINY13A-MMF (VFDFN-10(3x3))?

Manufactured by MICROCHIP, the ATTINY13A-MMF is housed in a VFDFN-10(3x3) package with 9 pins and a 0.50 mm lead pitch, supporting a VCC supply range of 1.8V to 4.5V. Key pins include: 1 (PB5: Multiplexed I/O & Peripheral Pin PB5 (General)), 2 (PB3: Multiplexed I/O & Peripheral Pin PB3 (General)), 3 (DNC: Multiplexed I/O & Peripheral Pin DNC (General)), 4 (PB4: Multiplexed I/O & Peripheral Pin PB4 (General)), 5 (GND: Ground Reference Pin (GND)), 6 (PB0: Multiplexed I/O & Peripheral Pin PB0 (General)).

What are the IPC-7351B PCB Footprint dimensions for ATTINY13A-MMF?

Normalized from the official datasheet mechanical drawing per IPC-7351B (Density Level B Nominal), ATTINY13A-MMF (VFDFN-10(3x3)) has a nominal body envelope of 3.00 × 3.00 mm, pitch e = 0.50 mm, and 9 copper pads plus a central exposed thermal pad (EPAD) of 2.75 × 2.75 mm with a 60% IPC-7525 windowed solder paste grid.

Where can I download KiCad (.kicad_mod, .kicad_sym), Fusion 360 (.lbr), and 3D STEP models for ATTINY13A-MMF?

You can download the verified open-hardware (CERN-OHL-P-2.0) CAD library bundle for ATTINY13A-MMF (MICROCHIP, VFDFN-10(3x3)) directly on this page, including KiCad 8 Footprints (.kicad_mod), Schematic Symbols (.kicad_sym), Autodesk Fusion 360 / Eagle (.lbr), and 3D STEP AP214 / WebGL GLB models.

Static Reference Appendix: Pinout Table (9 pins) & ATTINY13A Family VariantsExpand static table
Pin #Signal NameElectrical TypeFunctional Description & Design Notes
1PB5Digital_IOSignal terminal PB5 (I/O, 1.8V to 4.5V domain). Multiplexed alternate functions: PB5. Supported peripheral buses: General.
2PB3Digital_IOSignal terminal PB3 (I/O, 1.8V to 4.5V domain). Multiplexed alternate functions: PB3. Supported peripheral buses: General.
3DNCNCSignal terminal DNC (I/O, 1.8V to 4.5V domain). Multiplexed alternate functions: DNC. Supported peripheral buses: General.
4PB4Digital_IOSignal terminal PB4 (I/O, 1.8V to 4.5V domain). Multiplexed alternate functions: PB4. Supported peripheral buses: General.
5GNDGND0V electrical ground return terminal (GND) for internal core logic, I/O drivers, and analog sub-blocks.
6PB0Digital_IOSignal terminal PB0 (I/O, 1.8V to 4.5V domain). Multiplexed alternate functions: PB0. Supported peripheral buses: General.
7PB1Digital_IOSignal terminal PB1 (I/O, 1.8V to 4.5V domain). Multiplexed alternate functions: PB1. Supported peripheral buses: General.
8DNCNCSignal terminal DNC (I/O, 1.8V to 4.5V domain). Multiplexed alternate functions: DNC. Supported peripheral buses: General.
11EPGNDBottom exposed die attach pad (EP) providing primary thermal conduction path to the PCB and low-inductance 0V ground return.